Powerbase PBPM 40P Manual

Powerbase Plæneklipper PBPM 40P

Læs gratis den danske manual til Powerbase PBPM 40P (2 sider) i kategorien Plæneklipper. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Powerbase PBPM 40P, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Quick Start Guide
Your Safety is most important. Please read these safety rules before you use this machine
General Safety Rules
Read the user manual before using the machine
Wear safety goggles and heating protection
Wear gloves to protect your hands
Wear safety shoes to protect your feet
Note – This quick start guide is intended for experienced
users who have already assembled the tool, please refer
to the manual for further details
Quick Start Guide
Do you have questions?
We can help
Call Customer Service
Mon – Thur 08:45 am – 5:00 pm
Friday 08:45 am – 3:15 pm
0151 649 1500
Spare Parts also available
Items Included
ALWAYS READ THE SAFETY WARNINGS PRIOR TO USE
Assembling the Lawnmower (If in doubt, ALWAYS refer to the user guide before continuing) :-
1 Unpack the Lawnmower
a) Open the carton carefully and remove all the parts.
b) Ensure you have all the items (see above) before you discard the packaging.
Assembly Instructions
a) Fasten the lower push bar to the mounts on the mower housing (Fig. 4-5) & then screw the upper push bar to the
lower push bar (Fig. 6-8).
b) Pull the cords over the star nut so that they do not get kinked when the push bar is swung down (Fig. 7) and make sure that
the starter cord guide (Fig. 8/Item 19) on the right faces inwards. Then hook the starter cord in the starter cord guide (Fig. 9)
c) Fasten the cord holder to the lower push bar (Fig. 10).
d) Secure the cords to the upper push bar with the supplied cable tie (Fig. 11)
e) Hook the grass basket into the mounts on the mower (Fig. 15).
2 Operation
Important! The engine does not come with oil in it. Therefore, ensure that you add 0.4 litres of oil before starting it up (Fig 16).
Use normal, multi-grade oil (15W40). The oil level in the engine must be checked each time before mowing. (Fig 17 between
H and L). See user guide.
In order to avoid any unintentional start-ups of the lawn mower, it comes equipped with an engine brake (Fig. 12/Item A)
which must be pulled back before the engine can be started. When the engine control lever is released it must return to
its initial position, at which point the engine automatically switches off.
The cutting height is not adjusted at a single central point – instead, each of the 4 wheels have to be adjusted separately.
Three different cutting heights are available. (As-delivered state: Medium cutting height) All 4 wheels have to be set to Caution:
the same cutting height.
Note:
• Enginebrake(Fig.12/ItemA):Usethelevertostoptheengine.Whenyoureleasethelevertheengineandthebladestop
automatically(Fig.12/Pos.A).Beforeyoustarttomow,checkthestart/stopleverseveraltimestobesurethatitisworkingproperly.
Ensure that the tension cable can be smoothly operated (i.e. is not catching or kinking in any way). To mow, hold the lever in the
working position.
• Speedlever(Fig.14):Movethisleverinordertoincreaseordecreasetheenginespeed.(Tortoise=Slow/Hare=Fast)
Caution:Thebladebeginstorotateassoonastheengineisstarted.Beforeyoustarttheengine,movethemotorbrakeseveraltimes
to be sure that the stop cable is properly working.
a) Check the oil level (Fig. 16-17).
b) Fill the tank with approx. 1.1 litres of petrol (when empty), using a funnel and measuring jug to do so. Ensure that the petrol is free
of any contaminants.
c) Beforeyoustartthelawnmower,openthepetrolcock(Fig.13,arrow=petrolcockopen).Movethespeedlever(Fig.14)toposition
“N”.Presstheenginebrakeleverandupperpushbartogether(Fig.12/Pos.A),
d) Stand behind the mower. Place one hand on the engine start/stop lever. Place the other hand on the starter handle.
Start the engine using the reversing starter (Fig. 1/Item 11). To do this, pull the starter handle approx. 10 to 15 cm, (until you feel
a resistance) and then start the engine with a sharp vigorous pull. If the engine does not start, pull the handle again. This may take
up to 10 pulls. Never allow the starter cord to snap back. In cold weather, it may be necessary to repeat the starting Important! Note:
process several times.
4 105 8
697
11 1712 15
13 1614
19
A
H L

Produkt Specifikationer

Mærke: Powerbase
Kategori: Plæneklipper
Model: PBPM 40P

Har du brug for hjælp?

Hvis du har brug for hjælp til Powerbase PBPM 40P stil et spørgsmål nedenfor, og andre brugere vil svare dig


Plæneklipper Powerbase Manualer

Powerbase

Powerbase PBPM 40P Manual

2 September 2024

Plæneklipper Manualer

Nyeste Plæneklipper Manualer

Texas

Texas LMX2038 Manual

16 Juni 2025
Stiga

Stiga Park 540 DPX Manual

16 Juni 2025
Stiga

Stiga Park 420LM Manual

15 Juni 2025
Dedra

Dedra DED6998X Manual

15 Juni 2025
Mountfield

Mountfield SP536ES Manual

15 Juni 2025
Mountfield

Mountfield HP474 Manual

15 Juni 2025
Stiga

Stiga Villa 14 HST Manual

14 Juni 2025
Mountfield

Mountfield Empress 16SP Manual

14 Juni 2025
Atco

Atco Clipper 20 Manual

14 Juni 2025
Mountfield

Mountfield SP184 Manual

13 Juni 2025