Powerplus RK3 Manual

Powerplus Ikke kategoriseret RK3

Læs gratis den danske manual til Powerplus RK3 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Powerplus RK3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1. Package Contents

Right rail slider x 1

Left rail slider x 1

Nut M6 x 6

Screw M6 x 8

Fixing stud x 4

2. Assembly Steps

Step 1: Insert 4 pieces of fixing nuts into the following locations of rail sliders. Be sure fix

them firmly. Then, pull apart two ends of rail sliders and place them in a chassis. Be sure the

pulling distance meets the depth of rack chassis and place fixing studs to the corresponding

holes on supporting columns. For example, if depth of rack chassis is 700mm, please pull the

length of rail sliders is 700mm.

Quick Assembly

for Rack Mount Slider

V. 1.1

Nut M6

Screw M6

Right rail slider

Left rail slider

Fixing stud

Step 2: Use 4 pieces of M6 screws to mount rail sliders into chassis. See chart below:

Step 3: According to UPS height, put 6 pieces of nuts on proper location.

Step 4: Put UPS with assembled ears on the rail support.

Step 5: Fix the UPS in position with 4 screws.

Step 6: Assembly complete.

M6 screw

Nuts x 3

Produkt Specifikationer

Mærke:	Powerplus
Kategori:	Ikke kategoriseret
Model:	RK3
Bredde:	470 mm
Dybde:	39 mm
Højde:	426 mm
Vægt:	1580 g
Produktfarve:	Sølv
Harmoniseret systemkode (HS):	85389099
Kapabilitet:	VFI 1000RM/1500RM/2000RM/3000RM VFI 6000R/10000R LCD VFI 1000R/1500R/2000R/3000R LCD
Skruer inkluderet:	Ja