PowerWalker VI 3000 RLP Manual

PowerWalker Uafbrydelig strømforsyning (UPS) VI 3000 RLP

Læs gratis den danske manual til PowerWalker VI 3000 RLP (11 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om PowerWalker VI 3000 RLP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Manual

Power

Walker VI RLP Series

1000-30

MPORTANT SAFETY INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions carefully during installation and operation of the

unit. Read this manual thoroughly before attempting to unpack, install, or operate the UPS.

CAUTION! The UPS must be connected to a grounded AC power outlet with fuse or circuit breaker protection. DO NOT plug the

UPS into an outlet that is not grounded. If you need to power drain this equipment, turn off and unplug the unit.-

CAUTION! The battery can power hazardous components inside the unit, even when the AC input power is disconnected.

CAUTION! The UPS should be placed near the connected equipment and easily accessible.

CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area, free of

conductive contaminants. (Please see specifications for acceptable temperature and humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock, do not remove cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric shock, battery circuit is not isolated from AC power source; hazardous

voltage may exist between battery terminals and ground. Test before touching.

CAUTION! To reduce the risk of fire, connect the UPS to a branch circuit with 10 amperes (850 / 1K / 1.5K) / 16 amperes (2K / 3K)

maximum over-current protection in accordance CE requirement.with

CAUTION! The AC outlet where the UPS is connected should be close to the unit and easily accessible.

CAUTION! Please use only VDE marked mains cable, ( the mains cable of your equipment), to connect the UPS - -tested, CE e.g.,

to the AC outlet.

CAUTION! Please use only VDE tested, CE- -marked power cables to connect any equipment to the UPS.

CAUTION! When installing the equipment, ensure that the sum of the leakage current of the UPS and the connected equipment

does not exceed 3.5mA.

CAUTION! The 1000 / 2000 / 3000 / Battery module models are only qualified maintenance personnel may carry out installations.

CAUTION! Do not unplug the unit from AC Power during operation, as this will invalidate the protective ground insulation.

CAUTION! To avoid electric shock, turn off and unplug the unit before installing the input/output power cord with a ground wire.

Connect the ground wire prior to connecting the line wires!

CAUTION! Do not use an improper size power cord as it may cause damage to your equipment and cause fire hazards.

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! Under no circumstances this unit should be

used for medical applications involving life support equipment and/or patient care.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use with or near aquariums.

Condensation from the aquarium can come in contact with metal electrical contacts and cause the machine to short out.

CAUTION! Do not dispose of batteries in fire as the battery may explode.

CAUTION! Do not open or mutilate the battery, released electrolyte is harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and high short circuit current. The following precaution should be observed

when working on batteries

1. Remove watches, or other metal objects.rings,

2. Use tools with insulated handles.

CAUTION! The unit has a dangerous amount of voltage. When the UPS indicators is on, the units may continue to supply power

thus the unit’s outlets may have a dangerous amount of voltage even when it’s not plugged in to the wall outlet.

CAUTION! Make sure everything is turned off and disconnected completely before conducting any maintenance, repairs, or

shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor before any other cable is connected.

WARNING! (Fuses): To reduce the risk of fire, replace only with the same type and rating of fuse.

DO NOT INSTALL THE UPS WHERE IT WOULD BE EXPOSED TO DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

DO NOT BLOCK OFF VENTILATION OPENINGS AROUND THE HOUSING!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR DRYERS TO UPS OUTPUT SOCKETS!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES

AND THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED PERSONNEL AWAY FROM BATTERIES!

UNPACKING

(1) UPSx1; (2) User’s manual x1; (3) Input power cord x1; (4) Flat head screws: M4x8Lx8; (5) Rackmount trail (optional)x1; (6) Screw

hole dust covers x1; ( ) Rackmount ears (Stands)x2; ( ) USB communication cable (optional)7 8 x1.

Produkt Specifikationer

Mærke:	PowerWalker
Kategori:	Uafbrydelig strømforsyning (UPS)
Model:	VI 3000 RLP
Kode for international beskyttelse (IP):	IP20
Bredde:	438 mm
Dybde:	610 mm
Højde:	88 mm
Vægt:	18000 g
Produktfarve:	Sort
Batterispænding:	12 V
Batterikapacitet:	9 At
Skærmtype:	LCD
Pakkevægt:	20000 g
Pakkedybde:	231 mm
Pakkebredde:	556 mm
Pakkehøjde:	550 mm
USB-port:	Ja
Formfaktor:	Reolbeslag/tårn
Responstid:	6 ms
Relativ luftfugtighed ved drift (H-H):	5 - 90 %
Driftstemperatur (T-T):	0 - 40 °C
Støjniveau:	45 dB
Udgangseffekt:	2700 W
LED-indikatorer:	Ja
Strømkilde type:	Vekselstrøm
ECO-tilstand:	Ja
Antal understøttede batterier:	6
Opladningstid for batteri:	4 t
Indgangsfrekvens:	45/65 Hz
RS-232-porte:	1
Strømbeskyttelsesfunktioner:	Overbelastning
USB porttype:	USB Type-B
Strømstik:	C14 forbinder
AC udgange, antal:	8 AC stikkontakt(er)
AC stikkontakt typer:	C13 forbinder
Indgående driftsspænding (maks.):	290 V
Rackkapacitet:	2U
Output strømkapacitet (VA):	3 kVA
Indgående driftsspænding (min.):	165 V
UPS topologi:	Interaktivt indgangsstik
Bølgeform:	Ren sinus
Typisk backup tid ved halv styrke:	9 min.
Typisk backup tid ved fuld styrke:	2.5 min.
Koldstart:	Ja
SmartSlot:	Ja
Automatisk spændingsregulering (AVR):	Ja
Nødstrøm Off (EPO):	Ja
Antal indgående faser:	1
Udgående strømfaktor:	0.9
Antal udgående faser:	1
Regulering af udgangsspænding:	10 %
Effektivitet (on-line tilstand):	98.8 %
Opladningsstrøm:	6 A