Powr-Flite Powr-Scrub CAS16 Manual

Powr-Flite Gulvpoleringsmaskine Powr-Scrub CAS16

Læs gratis den danske manual til Powr-Flite Powr-Scrub CAS16 (6 sider) i kategorien Gulvpoleringsmaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Powr-Flite Powr-Scrub CAS16, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

OPERATOR’S MANUAL

WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL

COMPLETELY BEFORE OPERATING THIS EQUIPMENT.

Save These Instructions

COMPACT AUTOMATIC SCRUBBER

Model CAS16

CAS16-Man 02/2020

IMPORTANT SAFETY ADVICE

When using electrical equipment basic safety precautions should be

followed including the following:

You must have training in the operation of this machine before using it.

Read all instructions carefully before use.

l Keep children and unauthorized persons away from the machine

when in use.

l Do not leave the machine plugged in when not in use.

l Switch the machine off before removing the plug from the outlet.

l When unplugging, pull the plug, not the cord.

l The machine must be unplugged prior to cleaning or servicing.

l Keep the power cord clear of moving parts.

l Do not run the machine over the power cord.

l Do not operate the machine with a damaged power cord or plug,

or if the machine malfunctions or is damaged in any way.

l Do not use where hazardous dust is present.

l Do not use in an explosive atmosphere.

l Do not use where flammable liquids or gasses are present.

l Do not use or pick up flammable chemicals or liquids with

this machine.

l Take care when using the machine near stairs to avoid

overbalancing.

l Maintenance and repair must be done by authorized personnel only.

l Loose objects on the floor can become dangerous projectiles if struck

by the high-speed brush. Remove them before operating this machine.

l Wear suitable footwear to avoid slipping.

l Do not operate this machine in bare feet or with open-toed shoes

or sandals.

l Keep hands and feet well clear of the rotating brush.

l Do not smoke when using the machine.

l CAUTION:-This machine is for indoor use only and should not be

used or stored outdoors or in wet conditions.

CAUTION – This machine is heavy.

Do not attempt to lift the machine without assistance. Incorrect lifting

techniques may result in personal injury. It is recommended two people

lift the machine using a lifting point at the front and rear. DO NOT lift the

machine by the handle. Empty both the recovery and the solution tank

before lifting.

To move the machine to the work area, lock the handle and tilt it

backwards to raise the front off the floor and wheel into position.

PREPARING FOR USE

Before connecting the machine to the power supply, check that the

supply voltage corresponds with that marked on the rating label on the

rear of the machine.

IMPORTANT – If the power cord is damaged, it must only be replaced with

the appropriate type cord, available from the manufacturer.

Should an extension cord by used, ensure the cord rating is adequate

for the equipment. Do not use extension cord in coiled condition as this

could result in overheating of the cord.

WARNING: This machine must be grounded.

ADJUSTING THE HANDLE HEIGHT

1. Select the most comfortable handle height using the adjustment lever

on the handle and lock in position.

FILLING THE SOLUTION TANK

1. The solution tank can be filled on or off the machine. To fill the tank

off the machine the recovery tank must first be removed.

2. Remove vacuum hose and clear dome from recovery tank and lift

off tank.

3. Disconnect solution feed hose from solution

tank and lift tank off base. To release hose pull

connector collar forward.

4. Fill the solution tank with clean water using a

bucket, tap or hose, and an appropriate

measure of detergent.

5. Replace tanks on base and reconnect hoses.

Ensure solution hose is fully engaged and

captive in the connector allowing solution to

flow, thus preventing the pump from

overheating.

IMPORTANT – Only chemicals recommended by the manufacturer should

be used, i.e. low foaming, and follow the chemical manufacturer’s

directions regarding use, handling, disposal and health and safety

provisions. The tank capacity is 4 gallons. Do not overfill the tank as

spillage may occur

when in use.

IMPORTANT – When the

solution tank has

emptied, switch off the

machine and empty the

recovery tank before

refilling the solution

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

*When using an electrical scrubber, basic precautions should be followed.

*Read all instructions before using your scrubber.

METAL

SCREW

TAB FOR

GROUNDING SCREW

GROUNDING

OUTLET

GROUNDED

OUTLET BOX

ADAPTER

( C )

( B )

( ) A

TRANSPORTING THE MACHINE

Produkt Specifikationer

Mærke:	Powr-Flite
Kategori:	Gulvpoleringsmaskine
Model:	Powr-Scrub CAS16

Har du brug for hjælp?

Hvis du har brug for hjælp til Powr-Flite Powr-Scrub CAS16 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Gulvpoleringsmaskine Powr-Flite Manualer

Powr-Flite Predator PAS20E Manual

25 August 2025

Powr-Flite Multiwash PFMW14 Manual

25 August 2025

Powr-Flite Predator PAS14G Manual

25 August 2025

Powr-Flite Millennium NM202 Manual

25 August 2025

Powr-Flite Multiwash XL PFMW18 Manual

25 August 2025

Powr-Flite C202 Manual

25 August 2025

Powr-Flite PAS26R Manual

25 August 2025

Powr-Flite C171SD Manual

25 August 2025

Powr-Flite Powr-Scrub CAS16 Manual

25 August 2025

Powr-Flite C171HD Manual

25 August 2025

Gulvpoleringsmaskine Manualer

Nyeste Gulvpoleringsmaskine Manualer

Advance SC351 Manual

26 August 2025

Tornado 99406 Manual

25 August 2025

Mastercraft MD17E-MAS Manual

25 August 2025

Advance SC901 Manual

25 August 2025

Advance SC500 Manual

25 August 2025

Advance Adfinity X20C Manual

25 August 2025

Advance SC100 Manual

25 August 2025

Advance SC4000 Manual

25 August 2025

Advance SC450 Manual

25 August 2025

Advance SC800 Manual

25 August 2025