Premier Mounts AST-1321 Manual


Læs gratis den danske manual til Premier Mounts AST-1321 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Premier Mounts AST-1321, eller vil du spørge andre brugere om produktet?

Side 1/2
AST-1321 Suspension Adapter
Page - 1 - Installation Instructions
9533-011-031-00
AST-1321 INSTALLATION INSTRUCTIONS
Single Stud Installation
1. Secure the ceiling plate to the ceiling structure (see WARNING).
two (2) mounting points found on the ceiling plate to the ceiling structure (Figure 1).
3. Refer to ceiling mount or adapter installation instructions to complete the installation.
WARNING: Do not attach equipment over 160 lbs to the AST-1321. The ceiling structure must be capable of
supporting a minimum weight of 320 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualied personnel as outlined in the installation instructions must be
adhered to. Failure to do so could result in serious personal injury.
WARNING: Make sure to hold the flat panel display, or projector, securely and remove it from the mount to
make the height adjustment prior to loosening the adjustment screws. Loosen, remove, adjust
then re-tighten the screws. Failure to do so could result in injury and or damage to the display or
projector.
Figure 1. AST-1321 Single Stud Installation


Produkt Specifikationer

Mærke: Premier Mounts
Kategori: Ikke kategoriseret
Model: AST-1321
Højde: 533 mm
Vægt: 3200 g
Produktfarve: Sort
Diameter: 38 mm
Maksimal vægtkapacitet: 72.7 kg

Har du brug for hjælp?

Hvis du har brug for hjælp til Premier Mounts AST-1321 stil et spørgsmål nedenfor, og andre brugere vil svare dig