
2
IMPORTANT NOTES AND INSTRUCTIONS
TAKING POSSESSION OF YOUR MIXER
Examine your new mixer for any shipping damage. Report any such damage to the carrier for
compensation. Every mixer has left the factory fully tested and inspected. Shipping damage
which may occur during transit is the responsibility of purchaser.
Unit must be installed on a solid, level surface.
INSTALLATION NOTES:
Please ensure that during shipping none of the components have loosened.
Select a location for the mixer keeping these points in mind:
-Counter must be level.
-Easy access for maintenance and service.
-Clearance for operating controls, installing and removing agitators, bowl, or attachments.
-Sufficient space for adding ingredients during mixing periods.
TO AVOID SERIOUS PERSONAL INJURY:
ALWAYS install equipment in work area with adequate light and space.
ONLY operate the mixer on a solid, LEVEL, non-skid surface.
NEVER bypass, alter, or modify this equipment in any way from its original
condition. Doing so may create hazards and will void the warranty.
The outlet must be 110 Volts and 15 Amps (NEMA 5-15). It should be on a
dedicated circuit, and the electrical installation should be grounded. The circuit
breaker protecting this line should be adequately sized to protect the wires. The
line on which the unit is connected should not operate anything else. The use of
an extension cord is prohibited. Never cut the ground pin of the plug.
TO AVOID SERIOUS PERSONAL INJURY:
DO NOT remove the bowl guard.
DO NOT operate the mixer before reading the instruction manual first. ALWAYS
disconnect or unplug electrical power before cleaning, servicing, or adjusting
any parts or attachments.
ALWAYS keep hands, hair, and clothing away from moving parts.
www.mvpgroupcorp.com
2019-09