Pro-Lift B-S12D Manual


Læs gratis den danske manual til Pro-Lift B-S12D (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Pro-Lift B-S12D, eller vil du spørge andre brugere om produktet?

Side 1/24
Hydraulic
Bottle Jacks
B-002D-M1_042017_EN-FR-ES
Read this manual and follow all the Safety Rules and Operating Instructions before using this product.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
!
! WARNING
To avoid crushing and related injuries:
NEVER work on, under or around a
load supported only by a hydraulic jack.
ALWAYS use a pair of adequately rated
jack stands.
Operating Instructions & Parts Manual
Models B-S12D, B-S20D
Models B-008D, B-012D, B-020DModels B-002D, B-004D, B-006D
Models: B-002D, B-004D B-006D B-008D, B-012D, B-020D, B-S12D, B-S20D
2
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends
their contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this
device, remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing
parts are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall
be removed from service until repaired. If the equipment has been or is suspected to have been subjected to an
abnormal load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact
distributor or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be
made by an authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
PRODUCT DESCRIPTION
Pro-Lift Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle.
Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands.
WARNING: Never use hydraulic jack as a stand alone device. After lifting, immediately support the lifted load
with a pair of appropriately rated jack stands.
SPECIFICATIONS
Model Capacity Base Size
(L x W)
Min.
Height
Max.
Height
Extension
Screw
B-002D 2 Ton 3-1/2" x 3-5/8" 7-1/2" 13-5/8" 1-7/8"
B-004D 4 Ton 4-1/4" x 4-1/8" 8" 15-1/2" 2-3/8"
B-006D 6 Ton 4-1/2" x 4-3/8" 8-1/2" 16-5/8" 3"
B-008D 8 Ton 4-5/8" x 4-5/8"" 8-7/8" 17-3/8" 2-3/4"
B-012D 12 Ton 5-1/2" x 5-1/4" 9-1/2" 18-3/4" 3-1/8"
B-S12D 12 Ton 5 1/2" x 5 1/4" 6" 10 5/8" 1 1/2"
B-020D 20 Ton 6 1/4" x 6 1/8" 9 1/2" 18 5/8" 3 1/8"
B-S20D 20 Ton 6 1/4" x 6 1/8" 6 1/2" 11 1/8" 1 5/8"
!


Produkt Specifikationer

Mærke: Pro-Lift
Kategori: Ikke kategoriseret
Model: B-S12D

Har du brug for hjælp?

Hvis du har brug for hjælp til Pro-Lift B-S12D stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Pro-Lift Manualer

Pro-Lift

Pro-Lift B-S12D Manual

25 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer