Proaim P-OHLR-01 Manual

Proaim Kamerastativ P-OHLR-01

Læs gratis den danske manual til Proaim P-OHLR-01 (4 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Proaim P-OHLR-01, eller vil du spørge andre brugere om produktet?

Side 1/4
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Overhead Camera / Light Modular Studio Rig
OHLR(P- -01)
A s s e m b l y M a n u a l
3 x Accessory Spacers
Ball Head 3” Riser
End Spacers with Stand Post Adapters Wrench 1/4" 20 and 3/8" 16 Screws - -
4 Each Secon
2
Aaching Rail Secon
The End Spacers have and 1/4” 3/8”
mounng threads. Mount the 2 Stand
adapters at the boom of the End spacers.
Then mount it on the stand and secure it by
ghtening the knob.
Press in the Track into the end caps unl you
hear a click.
Proaim Overhead Rig Setup
The Accessory Spacers also include and1/4”
3/8” threads for mounng accessories. Place
the Accessory Spacers at the desired locaon
along the Track. The Spacer s end caps must
be facing down. Make sure the Accessory
Spacer clicks on the track rails.
3x Accessory Spacers
Aach track secons as shown and secure
them using the provided bolts. The Track
comes in a pair of 3 x 4 secons, so the
maximum length for the Track is 12.
The Track includes two types of Spacers:
2x End Spacers


Produkt Specifikationer

Mærke: Proaim
Kategori: Kamerastativ
Model: P-OHLR-01

Har du brug for hjælp?

Hvis du har brug for hjælp til Proaim P-OHLR-01 stil et spørgsmål nedenfor, og andre brugere vil svare dig