Proaim PRGHRZN01 Manual

Proaim Kamerastativ PRGHRZN01

Læs gratis den danske manual til Proaim PRGHRZN01 (4 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Proaim PRGHRZN01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

Assembly Manua l

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright

statutes or in wring by the Publisher.

Proaim Horizon Car Mount

Horizon Sucon Camera Mount for Car

(G-HRZN-01)

3 x Dust Covers

2 x Ratchet Belts

NOTE: To guarantee proper adhesion of

sucon cups, check that the surfaces of both

sucon cup and mounng surface are clean, dry

& dust-free. Please mount the device on smooth,

even, non-porous and metal surfaces.

 Mount the Robust sucon cup gripper on a at

surface, as shown in the image.

Horizon Sucon Camera Mount Setup

 Press the lever of the Robust Sucon Cup

Gripper and lock it properly.

 Secure the movement of the ball joint with the

help of the Ratchet knob of the Telescopic legs.

NOTE: Three Ratchet knobs are provided in

Horizon car mount. With the help of the boom

knob, you can change the ball joint movement of

the telescopic legs.

 Loosen the center Ratchet knob of the

telescopic legs.

 Adjust the height of the telescopic legs

according to your requirement and Tighten

the Ratchet knob properly as shown in the

image.

 Properly mount the Ball head (not included) at

the top plaorm of the Horizon car mount,

which has a 3/8"-16 camera screw, and secure

it.

NOTE: You can set up the system in just a few

minutes. The top of the Horizon car mount has a

3/8"-16 screw to mount your camera.

Produkt Specifikationer

Mærke:	Proaim
Kategori:	Kamerastativ
Model:	PRGHRZN01

Har du brug for hjælp?

Hvis du har brug for hjælp til Proaim PRGHRZN01 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamerastativ Proaim Manualer

Proaim TP-GVTA-01 Manual

18 September 2025

Proaim PRGHRZN01 Manual

18 September 2025

Proaim P-THA-01 Manual

29 August 2025

Proaim P-LLBT-100 Manual

6 Juli 2025

Proaim CM-SSHT-01 Manual

5 August 2024

Proaim ST-RGDB-01 Manual

9 Juni 2024

Proaim P-OHLR-01 Manual

9 Juni 2024

Proaim Hawk Lite Manual

5 Maj 2024

Kamerastativ Manualer

Nyeste Kamerastativ Manualer

Impact Deluxe Varipole Manual

18 September 2025

Mafell BionicBack BB-1 Manual

13 September 2025

Vello MPH-100 Manual

12 September 2025

Vello VB-2000 Manual

12 September 2025

Hohem iSteady MT2 Manual

11 September 2025

Adam Hall SMS11PRO Manual

11 September 2025

BoomTone DJ PARTY BAR MAXI Manual

9 September 2025

Glide Gear OH 150 Manual

7 September 2025

Sevenoak MicRig Manual

6 September 2025

Robus RTH-1030 Manual

5 September 2025