Projecta SPM180K Manual

Projecta Solpanel SPM180K

Læs gratis den danske manual til Projecta SPM180K (15 sider) i kategorien Solpanel. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Projecta SPM180K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

SOLAR PANEL KIT

MONOCRYSTALLINE

P/No. SPM180K

WARNING

SOLAR PANEL

• For installations with lead acid batteries, avoid sparks or flames near the batteries and

always use proper eye protection

• Given sufficient light, solar panels always generate energy even when they are disconnected

• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a

fire hazard

• Do not scratch or bend solar panels

• Do not disassemble the solar panel

• When mounting solar panels at a height adhere to all relevant safety regulations

• Do not walk on modules

• Do not attempt to increase module output by concentrating light on its surface with mirrors

• Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum

current ratings

• When storing the Solar panel kit do not pack heavy items on top the Solar panel and bag

• Do not disassemble the controller. Take to a qualified person if the unit requires repairing

FEATURE OVERVIEW

SOLAR PANEL

Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that

is cast from silicon. These cells are more efficient at producing power than amorphous panels,

so the size of the panel is smaller yet produces greater output power

Lightweight, Foldable Design – Folds up into a self contained 38cm x 56cm bag for easy

storage

Scratch Resistant – Panels feature a scratch resistant mat coating for durability

5m Lead & Battery Clips – Fused battery lead makes for trouble free battery connection.

Front pocket for easy storage

Heavy Duty Canvas – Tough canvas material suitable for camping and off-road environments

Metal Support Legs – Legs keep the panels at the optimum angle for maximum performance

Collapsible Tent Pole – The pole feeds through the sewn in loops to keep the panel rigid

when set-up

Reinforced Eyelets – Reinforced eyelets allow you to secure the panels using tent pegs, or hang

the panels vertically

SPECIFICATIONS

SOLAR CONTROLLER

Advanced MCU – Features control pulse width modulated (PWM) technology, high

efficiency operation.

Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.

4 Stage Charging – Built in regulator to prevent your battery from being overcharged.

Overcharging occurs when the charge voltage is unregulated. This can result in premature

battery failure.

The regulator also prevents your battery from being under charged, in the solar energy field,

battery undercharge always occurs, especially on some Conventional lead – acid or Calcium

batteries; The unit provides an automatic Equalization feature for deeply drained Conventional

lead acid batteries or Calcium batteries, as well as provides a cycling automatic Equalizing

feature every 28 days.

It keeps the battery fully charged by using a process called “floating”. This means the controller

will stop charging when the battery is full and will automatically start charging the battery as

required. This process will also reduce water loss and help prevent the battery from ‘drying out’.

Discharge Protection – Protects your battery from discharge at night. Under low light or no

light conditions the solar panel voltage could be less than the battery voltage. The unit contains

a special circuit which prevents current flowing back from the battery and into the solar panel.

LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.

Digital LCD – Directly display battery voltage, charging current, charging capacity (Amp hour),

battery types, full charge and faulty codes.

Daily Amp hour (Ah) Meter – Takes a reading of the accumulated energy (Ah) and can be

displayed at the push of a button (Volt/Amp). The meter resets when the solar panels are inactive

or disconnected/reconnected to the battery.

Unit Protection – Multi charging protects against reverse polarity, short circuit, over temperature,

over voltage, etc.

Voltage Compensation – Automatically measures the voltage drop from the output lead and

self adjusts to maximise the charge for the 5m supplied cable.

P/No. SPM180K

TYPE MONOCRYSTALLINE

RATED POWER 180W

OPEN CIRCUIT VOLTAGE 21V

SHORT CIRCUIT CURRENT 11.0A

PEAK POWER VOLTAGE 18.0V

PEAK POWER CURRENT 10.3A

TEST CONDITIONS 1000W/m2, 25°C

FUSE 15.0A

BATTERY CONNECTIONS Battery Clamps

WEIGHT 8.3kg

Produkt Specifikationer

Mærke:	Projecta
Kategori:	Solpanel
Model:	SPM180K

Har du brug for hjælp?

Hvis du har brug for hjælp til Projecta SPM180K stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solpanel Projecta Manualer

Projecta SPP135-MC4 Manual

1 August 2024

Projecta SPM80K Manual

28 Juli 2024

Projecta SPM120K Manual

23 Juli 2024

Projecta SPP120-MC4 Manual

24 Maj 2024

Projecta SPM180K Manual

29 December 2023

Projecta SPP60 Manual

4 Juni 2023

Projecta SPP160K Manual

5 December 2022

Projecta SPA400 Manual

27 November 2022

Projecta SPP20 Manual

21 Oktober 2022

Projecta SPP40 Manual

21 Oktober 2022

Solpanel Manualer

Nyeste Solpanel Manualer

Technaxx TX-241 Manual

25 Juli 2025

Phaesun Fresh Breeze Manual

23 Juli 2025

Mestic MSBC-130 Manual

22 Juli 2025

Osram OSP1000 Manual

21 Juli 2025

Phaesun Solar Rise One 2.0 Manual

14 Juli 2025

MSW S-POWER KIT100 Manual

10 Juli 2025

Dometic PS120A Manual

8 Juli 2025

NEO Tools 90-144 Manual

6 Juli 2025

Xtorm XP2SW200 Manual

6 Juli 2025

TP-Link VIGI SP9030 Manual

1 Juli 2025