Projecta SPM80K Manual

Projecta Solpanel SPM80K

Læs gratis den danske manual til Projecta SPM80K (8 sider) i kategorien Solpanel. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Projecta SPM80K, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

WARNING

SOLAR PANEL

• For installations with lead acid batteries, avoid sparks or flames near the batteries and

always use proper eye protection

• Given sufficient light, solar panels always generate energy even when they are disconnected

• Accidental ‘shorting’ of the terminals or wiring can result in sparks causing personal injury or a

fire hazard

• Do not scratch or bend solar panels

• Do not disassemble the solar panel

• When mounting solar panels at a height adhere to all relevant safety regulations

• Do not walk on modules

• Do not attempt to increase module output by concentrating light on its surface with mirrors

• Be sure to use components (cables, fuses, etc) greater than 25% of solar panel’s maximum

current ratings

• When storing the Solar panel kit do not pack heavy items on top the Solar panel bag

• Do not disassemble the controller. Take to a qualified person if the unit requires repairing

FEATURE OVERVIEW

SOLAR PANEL

Compact and Powerful – Monocrystalline solar panels are manufactured from a solar cell that

is cast from silicon. These cells are more efficient at producing power than amorphous panels,

so the size of the panel is smaller yet produces greater output power

Lightweight, Foldable Design – Folds up into a self contained bag for easy storage

Scratch Resistant – Panels feature a scratch resistant mat coating for durability

5m Lead & Battery Clips – Fused battery lead makes for trouble free battery connection.

Front pocket for easy storage

Heavy Duty Canvas – Tough canvas material suitable for camping and off-road environments

Metal Support Legs – Legs keep the panels at the optimum angle for maximum performance

Collapsible Tent Pole – The pole feeds through the sewn in loops to keep the panel rigid

when set-up

Reinforced Eyelets – Reinforced eyelets allow you to secure the panels using tent pegs, or hang

the panels vertically

12 VOLT

SOLAR PANEL KITS

MONOCRYSTALLINE

P/No. SPM80K, SPM120K

SPECIFICATIONS

SOLAR CONTROLLER

Advanced MCU – Features control pulse width modulated (PWM) technology, high efficiency

operation.

Multi-Chemistry – Target for Gel, AGM, Conventional lead-acid (WET) and Calcium Batteries.

4 Stage Charging – Built in regulator to prevent your battery from being overcharged.

Overcharging occurs when the charge voltage is unregulated. This can result in premature

battery failure.

The regulator also prevents your battery from being under charged, in the solar energy field,

battery undercharge always occurs, especially on some Conventional lead – acid or Calcium

batteries; The unit provides an automatic Equalization feature for deeply drained Conventional

lead acid batteries or Calcium batteries, as well as provides a cycling automatic Equalizing

feature every 28 days.

It keeps the battery fully charged by using a process called “floating”. This means the controller

will stop charging when the battery is full and will automatically start charging the battery as

required. This process will also reduce water loss and help prevent the battery from ‘drying out’.

Discharge Protection – Protects your battery from discharge at night. Under low light or no

light conditions the solar panel voltage could be less than the battery voltage. The unit contains

a special circuit which prevents current flowing back from the battery and into the solar panel.

LED Indicators – Coloured LED’s to easily indicate the operational status and battery conditions.

Unit Protection – Multi charging protects against reverse polarity, short circuit, over temperature,

over voltage, etc.

P/No. SPM80K SPM120K

TYPE MONOCRYSTALLINE

RATED POWER 80W 120W

OPEN CIRCUIT VOLTAGE 21V

SHORT CIRCUIT CURRENT 5.0A 7.52A

PEAK POWER VOLTAGE 17.5V

PEAK POWER CURRENT 4.56A 6.86A

TEST CONDITIONS 1000W/m2, 25˚C

FUSE 10A

BATTERY CONNECTIONS Battery Clamps

WEIGHT 4.7kg 6.8kg

APPROVALS EMC

BATTERY SIZES 250–900CCA 250–1200CCA

300–1000MCA 350–1500MCA

20–140Ah 40–200Ah

CHARGE TIME 7–35 Hours

Patent Pending

Produkt Specifikationer

Mærke:	Projecta
Kategori:	Solpanel
Model:	SPM80K

Har du brug for hjælp?

Hvis du har brug for hjælp til Projecta SPM80K stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solpanel Projecta Manualer

Projecta SPP135-MC4 Manual

1 August 2024

Projecta SPM80K Manual

28 Juli 2024

Projecta SPM120K Manual

23 Juli 2024

Projecta SPP120-MC4 Manual

24 Maj 2024

Projecta SPM180K Manual

29 December 2023

Projecta SPP60 Manual

4 Juni 2023

Projecta SPP160K Manual

5 December 2022

Projecta SPA400 Manual

27 November 2022

Projecta SPP20 Manual

21 Oktober 2022

Projecta SPP40 Manual

21 Oktober 2022

Solpanel Manualer

Nyeste Solpanel Manualer

Mestic MSBC-250 Manual

8 Juni 2025

Mestic MSMO-140 Manual

8 Juni 2025

Mestic MSBC-110 Manual

7 Juni 2025

Mestic MSMO-100 Manual

7 Juni 2025

Mestic MSMO-180 Manual

7 Juni 2025

Mestic MSMO-120 Manual

6 Juni 2025

Mestic MSBC-300 Manual

6 Juni 2025

Mestic MSMO-200 Manual

6 Juni 2025

Mestic MSBC-220 Manual

6 Juni 2025

Mestic MSMO-160 Manual

6 Juni 2025