Proteus PEC-3000 Manual


Læs gratis den danske manual til Proteus PEC-3000 (2 sider) i kategorien Hjemmetræner. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Proteus PEC-3000, eller vil du spørge andre brugere om produktet?

Side 1/2
EXERCISE MONITOR INSTRUCTION MANUAL BC-8139II-01
FRONT VIEW
KEY GUIDE :
MODE 1.Select function to be preset.
Time-Calorie-Pulse-Distance.
2.Select function and display on the screen during exercise.
Scan-Time-Speed-Calorie-Pulse-Distance.
UP Increase the setting value of the following functions.
Time-Calorie-Pulse-Distance.
DOWN Decrease the setting value of the following functions
Time-Calorie-Pulse-Distance
RESET 1.Hold two seconds to reset all of the values to Zero
2.During the setting mode, press this button to clear the setting values to Zero
3.During the stop mode, press this button to clear the values on the display to Zero
ENTER 1.Press this button to enter setting mode
2.Press this button to confirm the setting values
BATTERY REPLACEMENT :
1.Please install 2 pcs AA or UM-3 batteries in the battery case on the back of monitor
2.Ensure that the batteries are correctly fitted. Battery must be correctly positioned and
make sure the battery spring is properly contacted with battery
3.Should the displays appear blank or display only partial segments remove the batteries wait
15 seconds, and then replace
4.Whenever remove batteries all the functional values will be reset to zero
FUNCTIONS AND OPERATIONS
AUTO ON/OFF
The monitor will wake up automatically if the exercise machine is in motion. If stop
exercising for over 4 minutes, monitor will turn off and reset all function values to zero.
KPH:The unit for the Speed and Distance is Km
MPH:The unit for the Speed and Distance is Mile
SCAN
Press the button until the SCAN display on the screen. Monitor will display the following
function and each function will keep 6 seconds on the screen.
Scan-Time-Speed-Calorie-Pulse-Distance
TIME
Press the button until the TIME display on the screen. Monitor will display the Time
function on the screen.
Count up:
Without setting the time value, the monitor will count up the time from 00:00~99:59
Count down:
Setting the exercise time from 1:00~99:00 minutes, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm
SPEED
Press the button until the SPEED display on the screen. Monitor will display the speed
function on the screen.
CALORIE
Press the button until the CAL display on the screen. Monitor will accumulate the calorie
consumption.
DISTANCE
Press the button until the DIST display on the screen. Monitor will display the distance
function on the screen
Count up:
Without setting the distance value, the monitor will count up the time from 0.1~999.9Km or
Mile
Count down:
Setting the exercise time from 1.0~999.0Km or Mile, the monitor will count down from your
setting values. Once reach setting value, monitor will alarm
PULSE
Press the button until the display on the screen. The monitor will display your current
heart beat rate in beats per minute
Pulse Limit :
Setting the value of pulse limit between 90 to 220, the monitor will measure your heartbeats.
Once reach setting value, monitor will alarm twice every 6 seconds every 6 seconds until your
heartbeats under your setting value
Place the palms of your hands on the both of the contact pads and the monitor will show up
your current heart beat rate in beat per minute (BPM) on the LCD display
The batteries must be removed from the appliance before it is scrapped and that they
are disposed of safely.


Produkt Specifikationer

Mærke: Proteus
Kategori: Hjemmetræner
Model: PEC-3000

Har du brug for hjælp?

Hvis du har brug for hjælp til Proteus PEC-3000 stil et spørgsmål nedenfor, og andre brugere vil svare dig