Pure Acoustics Blyss 603T Manual


Læs gratis den danske manual til Pure Acoustics Blyss 603T (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Pure Acoustics Blyss 603T, eller vil du spørge andre brugere om produktet?

Side 1/2
Blyss Series
Owner’s Manual
Introduction
Thank you for purchasing Pure Acoustics’ products, and welcome to the Pure Acoustics family of satisfied
customers!
Pure Acoustics was established to fulfill the need for high-quality speakers of exceptional design at an
affordable price. After years of research and development, and by manufacturing all parts ourselves -- from
the voice-coil to the uniquely-designed crossover -- Pure Acoustics is able to offer you speakers of superior
value.
Each speaker component has been designed and engineered with first-rate materials to produce exceptional
sound. Our speakers offer the best of it all high-quality sound, hand-made solid construction, and a
remarkably stylish appearance.
We welcome you to witness the results. Our team’s dedication to quality, reliability and attractive design has
created some of the best-value speakers you can find today.
Reading the complete manual will help you to set up your speakers properly and reward you with a fine
listening experience. Pure Acoustics distribution centers in Europe, Asia, Australia and the Americas will be
happy to assist you with any questions you may have. Please look for the distributor nearest you on our
website www.pure-acoustics.com.
Safety Information
Please read these instructions carefully before handling, installing, or using the speaker. Retain this
manual for future reference.
Installation must be carried out by qualified personnel with expertise in safe installation and rigging
practices.
All electrical and structural installations must comply with relevant local, state, and national codes. It is
strongly recommended that a licensed engineer, electrician, or other qualified professional review and
approve the installation before use.
If the speaker malfunctions (e.g., produces no sound, distorted sound) or emits smoke or an unusual
odor, discontinue use immediately. Disconnect all electrical connections and have the unit inspected by
qualified service personnel.
Ensure that the installation location can adequately support the weight of the speaker and its mounting
hardware.
Avoid using cleaning fluids, solvents, or other chemicals on the speaker cabinets. Clean only with a dry
cloth.
FEATURES
IP44-rated weatherproof design: Resistant to extreme conditions including intense sunlight, humidity,
rain, and dust.
Optimized audio performance: 3 /5 /8 high-output woofer with wide dispersion for clear sound in open
spaces and large venues.
Durable construction: Gold-plated terminals with anti-corrosion coating for long-term reliability.
Flexible mounting: Quick-install brackets included for vertical or horizontal positioning.
Aesthetic options: Sleek enclosures available in classic black or white finishes.
System integration: Built-in 100V line transformer for seamless compatibility with commercial audio
systems.
Installation
All speakers must be connected to a constant voltage line. The amplifier power should be equal to or
greater than the total power of all connected speakers.
The output power can be adjusted using the control located at the rear of the speaker.
Ensure that the transformer setting is equal to or lower than the nominal power supplied by the
amplifier.
For standard residential systems requiring 8-ohm speakers, set the dial on the rear of the speaker to 8
ohms and connect it to the receiver.
Specifications
Limited one-year warranty
Pure Acoustics products have been designed and manufactured to the highest quality standards. However,
in the event that something malfunctions, Pure Acoustics and your local authorized distributor warrant free
of charge parts and labor (some exclusions may apply) for a period of one year. This warranty is only valid
for the original owner. This warranty is limited to the repair of the product. This warranty will not apply to
units that were subject to misuse, neglect, abuse, alteration or improper installation. This warranty will not
cover damage due to fire, water, heat, lightning or any other cause beyond the control of Pure Acoustics.
Retention of your original dated receipt is required in order to obtain warranty service from your local
authorized Pure Acoustics Dealer.
Item
Blyss 603T
Blyss 605T
Blyss 608T
Nominal Power (Ohmic
mode)
20W
60W
100W
Power (100V line mode)
2W/4W/8W/12W
4W/8W/16W/30W
7.5W/15W/30W/60W
Impedance
8 Ω
8 Ω
8 Ω
Woofer
3” Polypropylene
5” Polypropylene
8” Polypropylene
Tweeter
1” Mylar
1” Mylar
1” Dome
Frequency response
100Hz-20KHz
60Hz-20KHz
45Hz-20KHz
IP Rating
IP44
IP44
IP44
Sensitivity
83dB (±2dB)
89dB (±2dB)
90dB (±2dB)
Bracket
Aluminum
Aluminum
Grill
Aluminum
Aluminum
Aluminum
Terminals
Cable clamps up to Ø5mm (0.2 inch) conductor
Dimension (HxWxD)
165*115*165mm
256*167*218mm
360*240*254mm
Weight (per pair)
2.1kg
5.6kg
13.3kg


Produkt Specifikationer

Mærke: Pure Acoustics
Kategori: Højttaler
Model: Blyss 603T

Har du brug for hjælp?

Hvis du har brug for hjælp til Pure Acoustics Blyss 603T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Pure Acoustics Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

Caliber

Caliber HSB402BT Manual

8 Oktober 2025
Caliber

Caliber HPG322BT Manual

8 Oktober 2025
Caliber

Caliber HSG 404BT Manual

8 Oktober 2025
TOA

TOA SR-FB3 Manual

8 Oktober 2025
Caliber

Caliber CDS16G Manual

8 Oktober 2025
4smarts

4smarts B9 Manual

8 Oktober 2025
TOA

TOA HY-CN1B Manual

8 Oktober 2025
TOA

TOA SR-TB3 Manual

8 Oktober 2025