2
OD- TWS User Manual 975 (
(
(
(( )
)
)
))
I. Point to point connecon
1. Turn on one of the two speakers (main speaker) and remote to press “ ”
select Bluetooth mode
2. Enable Bluetooth on your mobile, search the speaker name PURE OD975 “ ”
and connect (once speaker is connected with one mobile device, it cannot be
discovered by other mobile devices)
3. Turn on another speaker (secondary speaker) and remote to press “ ”
select Bluetooth mode
4. Long press button on remote for 3 seconds towards both two “TWS”
speakers one after another until you hear dudu from both speakers. “ ” sound
Once two speakers are successfully paired, a sound will be heard “di”
Remarks: Once the two speakers are successfully paired, the system will memorize
and set to auto pairing mode if the units are restarted. A sound will be heard if “di”
auto pairing is successful. (You will just need to repeat above 1-3, because the
secondary speaker will be paired to the main speaker automatically after it s tuned ’
on).
5. You can play with two speakers as left and right channels.
6. Two speakers will be re-paired automatically once restart the two units and
the main speaker will be re-connected with the last mobile device that been
connected before speakers are turned o.
Remarks:
1. If need to connect with a new mobile device, it will require the previous mobile device
to disconnect with the main speaker by either short pressing “TWS” button on remote or
disconnecting the main speaker on Bluetooth setting of the mobile device .
2. If the previous mobile device is beyond the Bluetooth working distance, the main
speaker can also be discovered and connected by the new mobile device after 1
minute.
II. Multi-points connection
1. Turn on one of the two speakers (speaker 1) (and remote to press “ ”
select Bluetooth mode
2. Enable Bluetooth on mobile 1, search speaker 1 PURE OD975 and name “ ”
connect (once speaker is connected with one mobile device, it cannot be
discovered by other mobile devices)