PureLink ID-HT-1 Manual

PureLink Tang ID-HT-1

Læs gratis den danske manual til PureLink ID-HT-1 (7 sider) i kategorien Tang. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 20 anmeldelser. Har du et spørgsmål om PureLink ID-HT-1, eller vil du spørge andre brugere om produktet?

Side 1/7
Manual
Assembly of PureID DIY Cables
© PureLink GmbH 2015
1
I n n o v a t i o n G e r m a n E n t e r p r i s e s .K n o w - H o w . Q u a l i t y . D e s i g n .
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: 0049 (0)5971-800 299-0 | E-mail: info@purelink.de | Internet: www.purelink.de
Manual
for creating solderless DIY HDMI cabling included in the PureID series
ID-CAB-PURE
ID-CAB-ULTRA
© 2015 PureLink GmbH All rights reserved.
Manual
Assembly of PureID DIY Cables
© PureLink GmbH 2015
2
I n n o v a t i o n G e r m a n E n t e r p r i s e s .K n o w - H o w . Q u a l i t y . D e s i g n .
PureLink GmbH | Von-Liebig-Straße 10 | 48432 Rheine | Germany | Tel.: 0049 (0)5971-800 299-0 | E-mail: info@purelink.de | Internet: www.purelink.de
Step 1
Prepare The Cable
The PureLink HDMI Do-It-Yourself cables use a unique technology for manufacturing your own HDMI cables. The
HDMI cable consists of 5 twisted pairs, 4 separate wires and a drain wire, used for grounding. The four blue colored
pairs are meant for transmission of TMDS signals, the twisted pair with silver aluminium foil is for Ethernet (HEAC)
and Audio Return Channel (ARC). Our compatible cables are “ID-CAB-PURE“ and ID-CAB-ULTRA“. All parts needed
for manufaturing are included in our starter-kit “ID-STARTER“ or available separately.
First remove the insulation of the cable, then cut
the outer jacket with a sharp knife, strip the cable
jacket for about 3cm and remove the outer metal
braiding.
Remove about 2 cm aluminium foil around the ve
twisted pairs. It´s important to keep 1cm blue alu-
minium foil around the twisted pairs. You need to
be able to recognize the diernt pairs & wires in the
next step. Remove the silver foil around the single
wires so that only 6mm of silver foil is left.
1 2
3cm
2cm 1cm
2,4cm
0,6cm


Produkt Specifikationer

Mærke: PureLink
Kategori: Tang
Model: ID-HT-1
Type: Kombinationsværktøj
Antal pr. pakke: 1 stk
Produktfarve: Blå
Understøttede videotilstande: 1080i, 1080p, 2160p
3D: Ja
HDCP: Ja
Maksimal opløsning: 4096 x 2160 pixel
Input farvedybde: 16/24 Bit
Audio Return Channel (ARC): Ja
Bæredygtighedscertifikater: RoHS
Afspilning af diskformater: SACD
Dataoverførselshastighed: 10.2 Gbit/sek.
Kabeltype: PureID HDMI DIY
Understøttelse af x.v. farve: Ja
Understøttelse af dybe farver: Ja
Stiktype: HDMI
Dolby-teknologier: Dolby Digital Plus, Dolby TrueHD, DTS-HD
Båndbredde (maks.): 340 MHz

Har du brug for hjælp?

Hvis du har brug for hjælp til PureLink ID-HT-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig