Pyle PCT60 Manual

Pyle Ikke kategoriseret PCT60

Læs gratis den danske manual til Pyle PCT60 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Pyle PCT60, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PCT60 Pro Cable Tester

Congartulations!

The PCT60 accepts a wide range of cable types used in variety of A/V applications

such as XLR (3 and 5-pin), 1/4” and 1/8” TS, TRS, and TT plugs as well as RCA,

MIDI, Speakon (8-P, 4-P), Din 4-P, RJ45, and USB. Choose to either test continuity or

send out test tones. Output level is adjustable between +4dBu pro line level, -10dBV

consumer line level, and -50 mic level. The PCT60 can check for continuity, intermit-

tency, phantom power, and the presence of grounded shields. The unit runs off two

AA 1.5V batteries makin g it easy to carry around whether working in the eld or at WW

home.

www.PyleAudio.com

Installing the battery

1. Locate the small screw for the battery cover plate on the back of the unit

2. Using a small Phillips head screwdriver, rotate the small screw counter

clockwise.

3. Remove the plate.

4. Insert the two AA batteries with the correct polarity.

5. Reattach battery cover plate, insert screw and turn clockwise to tighten.

Testing cables

1. Move the On switch to Cable Tester.

2. To test pins 1-3, you may adjust the Switch 1-3 selector to SW1. For cables

with more than three pins, you may adjust the selector to SW2 for pins 4-6

and SW3 for pins 7-8.

3. Insert one end of the cable into one of the various inputs.

4. Insert the other end of the cable into one of the various outputs.

5. If the Grounded Shield LED lights up, this indicates that the XLR out shield

has been connected to pin1/sleeve.

6. Once the cable has been connected to both an input and output, the LED

grid will light up to show which pins are connected.

7. Each LED shows which input pins are connected to each output pin. The

Input pins are represented vertically while the output pins are represented

horizontally.

Ex. The LED in the top right hand corner shows that Pin1/Sleeve

on the input is going to Pin1/Sleeve on the output side.

8. For cables with more than three pins, you may adjust the Switch 1-3 selec

tor to SW2 for pins 4-6 and SW3 for pins 7-8.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Ikke kategoriseret
Model:	PCT60
Produktfarve:	Grå
Husmateriale:	Metal
LED-indikatorer:	Ja
AUX-indgang:	Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PCT60 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Pyle Manualer

Pyle PLMRCW3 Manual

18 Juli 2025

Pyle PSDPKIT10 Manual

29 Juni 2025

4 Juni 2025

11 Marts 2025

12 Januar 2025

9 Januar 2025

Pyle PSCBLKIT22 Manual

1 Januar 2025

Pyle PKST44W Manual

6 December 2024

Pyle PL2DN105 Manual

6 December 2024

Pyle PDWR61BT Manual

21 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue 630 Manual

1 August 2025

Hozelock 4712 Manual

1 August 2025

Navman Platinum S150 Manual

1 August 2025

Navman AUTO500 DUAL Manual

1 August 2025

Navman MiVue 150 SAFETY Manual

1 August 2025

Navman MiVue 338 Manual

1 August 2025

Navman MyTruck II Manual

1 August 2025

Navman S-Series Classic S45 Manual

1 August 2025

Navman EZY30 Manual

1 August 2025

Navman AUTO300 WIFI Manual

1 August 2025