www.PyleUSA.com www.PyleUSA.com
FOREWORD
Please read this manual before using this equipment in order to avoid
damage through incorrect operation and to get the best performance
from your purchase. Please keep and store this instruction booklet in a
safe place after reading it for future reference.
This professional wireless microphone system operates on high-eciency,
low-consumption discharging techniques. Performance features include
independent developed mobile frequency compression, expander circuitry,
image frequency limiting circuits, a multiple checked silent and noise-free
circuits, antenna diversity receiving circuit & switch impact noise defeat
circuits. Resist reverberation circuit and changed output control. Passes Q.C.
code standards.
SYSTEM FEATURES
All UHF Series systems oer a variety of exceptionalfeatures, including:
1. Multiple System Use: Up to several UHF systems can be used in the same
performance space. Each system must be set at a dierent frequency.
(Frequency marked on the back of the receiver)
2. Unbalanced 1/4' phone plug and balanced XLR Simultaneous Output Use:
output connectors may be used simultaneously to dierent externaldevices.
3. UHF Series transmitters will work at a distance of up to 50 meters Range:
(about 164ft.) from the receiver.
4. Squelch circuit analyzes signal strength and quality so that Noise Squelch:
it can reduce the likelihood of noise burst due to environmental RF (radio
frequency) noise.
5. Low Battery Warning Light: A red light on the body-pack and hand-held
transmitters warns the user that there is less than one hour of battery life left.
SYSTEM TYPE
The Vocal Artist-UHF is a hand-held system designed for singers who desire
the high quality of microphones and the freedom of wireless performance.
1 2
RECEIVER FEATURES
1. Power Switch: Power the receiver.ON/OFF
2. Volume Knob: Adjust the volume output of the receiver.
3. It glows when the Receiver receives RF signal from"RF" Signal Indicator:
Transmitter.
4. Power Indicator: Indicates the power .ON/OFF
5. "AF" Audio Level Indicator: Indicates the wireless system audio signal level.
6. Antenna A/B.
7. Connect the audio cable from this jack to the XLR Balanced Output Jack:
input port of amplier, mixer.
8. Connect the audio cable from this jack to the input 1/4" Audio Output Jack:
port of amplier, mixer.
9. Power Jack: Connect the AC/DC adapter to receiver.
