Pyle PDWM811RD Manual

Pyle Mikrofon PDWM811RD

Læs gratis den danske manual til Pyle PDWM811RD (4 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Pyle PDWM811RD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WIRELESS HANDHELD MICROPHONE SYSTEM SPECIFICATION

Please read carefully before use and keep for future reference.

TRANSMITTER

1. Power switch

2. Display screen

3. Frequency selective buttons

4. Battery case

www.PyleUSA.com

RECEIVER

Front Panel

Back Panel

1. Antenna for B channel

2. DC12V Power supply

3. 6.35 Mixed output port

4. The right track 6.35 input port

1. C/6.35 Audio line input port

2. D/6.35 Audio line input port

3. Volume adjustment for channel C

4. Volume adjustment for channel D

5. Volume adjustment for channel A

6. Volume adjustment for channel B

7. Echo adjustment

8. Music Volume adjustment

9. USB 2.1 input port

10. MP3 module display

11. Switch button (Bluetooth/MP3)

12. Power switch

13. Multi function button

(Pause/Play/Next/Last)

14. Recording Button

5. The left track 6.35 input port

6. Stereo 3.5 output port

7. 3.5 Audio input port

8. Antenna for A channel

OPERATING THE TRANSMITTER

1. Open the battery case according to the instruction and insert battery

noting correct polarities (+ and –) indicated in the battery compartment.

2. Set the handheld switch to “ ” position, or press the switch. ON

The microphone will display the frequency which means the microphone

is turned ON. Turn the switch to “ ” for turn o power or press the OFF

switch again. If there’s no frequency display that means the microphone

is turned OFF.

DISPLAY FUNCTION

NOTE:

The receiver and transmitter system should be with same channel

(frequency) one by one, otherwise it will not work.

www.PyleUSA.com

OPERATING THE RECEIVER

1. Rotate the antennas A and B to separate them by 90 degrees.

2. Connect the power base DC/AC

3. Audio output connection:

*Mixed non-equilibrium output, insert the end of audio cable to UN BAL

AF OUT: 1:2 socket and insert to the other end of MIC IN or AUX IN

socket from mixer or amplier.

4. Turn ON the power switch, power indicator lights up.

5. When the handheld microphone is turned on, the “RF” indicator of the

receiver lights up. Receiver output volume can be controlled by the

volume control knob.

*Insert the voice line into UN BAL AF OUT: socket 1, connect the other

end into socket of MIC IN or AUX IN of mixer or amplier, same operation

type with another channel.

*Independent balanced output BAL AF OUT: 1 and 2 provide audio

transmission three-pin card interface for professional mixer, ampiiers.

RECEIVER INSTALLATION THE METHOD

• One meter above the ground.

• Pull out all the antennas, otherwise it will aect the reception eect.

• Be more than one meter away from the wall.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Mikrofon
Model:	PDWM811RD

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PDWM811RD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrofon Pyle Manualer

Pyle PSW578UT Manual

10 August 2025

Pyle PLPPADMT20 Manual

9 August 2025

7 Juni 2025

25 Januar 2025

25 Januar 2025

25 Januar 2025

Pyle Pro PDWM2560 Manual

30 December 2025

Pyle PDMICKT34 Manual

6 December 2024

Pyle PDWM812WH Manual

6 December 2024

Pyle PDWM224BK Manual

6 December 2024

Mikrofon Manualer

Nyeste Mikrofon Manualer

Vocopro BenchMark-Quad-BP Manual

18 September 2025

AKG C 518 ML Manual

17 September 2025

Defender Impulse GMC 650 Manual

17 September 2025

Defender Forte GMC 300 Manual

17 September 2025

Defender Forte GMC 350 Manual

17 September 2025

Defender Galactar GMC 250 Manual

16 September 2025

Defender Ring GMC 150 Manual

16 September 2025

Defender Impulse GMC 400 Manual

16 September 2025

Defender Talky-139 Manual

16 September 2025

Defender Talky-138 Manual

16 September 2025