Pyle PLCMTR92.5 Manual

Pyle Bakkamera PLCMTR92.5

Læs gratis den danske manual til Pyle PLCMTR92.5 (7 sider) i kategorien Bakkamera. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Pyle PLCMTR92.5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

PLCMTR92.5

9'' Display Monitor (DC 12-24V for Bus, Truck, Trailer, Van)

Waterproof Rated Backup Camera & Monitor System

www.PyleUSA.com

PLCMTR - Commercial Grade Camera System

Please read instructions carefully before installation and use.

Installation should be performed by a professional installer.

To ensure your safety, the driver should not watch videos or operate features on the

monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to

repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair

facility. Please observe and obey the local laws and regulations when installing the unit.

Upon Installation, please make sure as to not to interfere with any of the vehicle's safety

features, wiring, components, etc. We are not responsible for any damages, injury,

malfunctions or otherwise noted due to faulty or non-professional installation.

Connection

Connect the camera's threaded locking 4-pin cable connectors into the female receiving

connection of the included 4-pin extension cable. The extension cable then connect to

your compatible video monitors with 4-pin receiving connector. The threaded locking

cable connectors of the camera serve to provide power and video for the camera.

Please remember to disconnect your vehicle's battery prior to any connection / installation.

Use the included wiring harness to provide power and video signals to your monitor.

There are colored wires to assist in the video camera system setup.

See the wiring diagram for connections between cameras, monitor and your vehicle

When turning the vehicle's ignition key or turning to the accessory or ON

position, power is supplied to the camera system through the control box and

the monitor will be in stand-by mode.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Bakkamera
Model:	PLCMTR92.5

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLCMTR92.5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bakkamera Pyle Manualer

Pyle PLCM4340 Manual

6 December 2024

Pyle PLCMTRDVR41 Manual

26 August 2024

Pyle PLDVRCAM74 Manual

20 August 2024

Pyle PLCMDVR47 Manual

7 August 2024

Pyle PLCM7800 Manual

6 August 2024

Pyle PLCMH6 Manual

6 August 2024

Pyle PLCM2720.5 Manual

6 August 2024

Pyle PLCM4LED Manual

4 August 2024

Pyle PLDVRCAM71.5 Manual

2 August 2024

Pyle PLCM4550 Manual

1 August 2024

Bakkamera Manualer

Nyeste Bakkamera Manualer

Pioneer ND-BC9 Manual

29 Maj 2025

Dometic PerfectView CAM 18 Manual

20 Februar 2025

Dometic PerfectView CAM35 2.0 Manual

11 Januar 2025

Kenwood CMOS-C230 Manual

30 December 2025

29 December 2024

29 December 2024

29 December 2024

29 December 2024

Dometic PerfectView CAM 11 Manual

26 November 2024

CRUX RVCCH-75RC Manual

18 November 2024