Pyle PSTND35 Manual

Pyle Mikrofon PSTND35

Læs gratis den danske manual til Pyle PSTND35 (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Pyle PSTND35, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PSTND35

Heavy Duty Telescoping Height

Adjustment Monitor Speaker Stand

(Pair)

www.pyleaudio.com

ASSEMBLING:

1. Take one long hex bolt and one washer and

insert through hole in center of one triangular

base on side with rubber feet.

2. Thread the long hex bolt into the bottom of

one vertical shaft and tighten hex bolt with the

provided Allen wrench to secure vertical shaft to

triangular base.

3. Unthread and remove short hex bolt with

washer located in the top of the vertical shaft.

4. Insert short hex bolt with washer through hole

in the center of one monitor plate and thread into

top of the vertical shaft. Secure monitor plate to

vertical shaft with the Allen wrench.

5. Adjust monitor plate height by loosening large

thumb knob on clutch housing and move upper

shaft to desired height.

6. Insert safety pin all the way through vertical

shaft at lowest hole exposed, allowing the safety

pin to rest on clutch housing. Secure by tightening

large thumb knob on clutch housing.

7. When placing stand on carpet, remove the

rubber feet from triangular base and screw in

three leveling carpet spikes. Adjust carpet spikes

so that the monitor platform is level.

8. Repeat steps 1 thru 7 for second stand

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Mikrofon
Model:	PSTND35
Vægt:	8940 g
Produktfarve:	Sort
Placering:	Gulv
Højdejustering:	Ja
Højdejusteringsområde:	660 - 1320 mm
Teleskopisk:	Ja