QSC QIO-IR1x4 Manual

QSC Ikke kategoriseret QIO-IR1x4

Læs gratis den danske manual til QSC QIO-IR1x4 (13 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om QSC QIO-IR1x4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

™

Hardware User Manual

Q-SYS™ QIO Endpoints

QIO-ML4i Network Audio I/O Expander for Q-SYS

QIO-L4o Network Audio I/O Expander for Q-SYS

QIO-ML2x2 Network Audio I/O Expander for Q-SYS

QIO-GP8x8 Network Control I/O Expander for Q-SYS

TD-001667-01-A

*TD-001667-01*

EXPLANATION OF TERMS AND SYMBOLS

The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.

The term “CAUTION” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in

equipment damage to equipment that may not be covered under the warranty.

The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.

The term “NOTE” indicates additional useful information.

The lightning ﬂash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the

product’s enclosure that may constitute a risk of electric shock to humans.

The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

• Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the ambient operating temperature

of the rack environment may be greater than room ambient. Consideration should be given to ensure that the maximum

operating temperature range (0°C to 50°C (32°F to 122°F ) is not exceeded. However, if installing a GP8x8 in a multi-unit

rack assembly with units on all sides, the maximum operating temperature should not exceed 40°C when devices are placed

above or below.

• Reduced Air Flow – Installation of the equipment in a rack should be such that the amount of air ﬂow required for safe

operation of the equipment is not compromised.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not submerge the apparatus in water or liquids.

7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into theapparatus.

8. Clean only with a dry cloth.

9. Do not block any ventilation opening. Install in accordance with the manufacturer’sinstructions.

10. Keep all ventilation openings free of dust or other matter.

11 . Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

12. Do not unplug the unit by pulling on the cord, use the plug.

13. Only use attachments/accessories speciﬁed by the manufacturer.

14. Unplug this apparatus during lightning storms or when unused for long periods oftime.

15. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

16. Adhere to all applicable, local codes.

17. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Produkt Specifikationer

Mærke:	QSC
Kategori:	Ikke kategoriseret
Model:	QIO-IR1x4

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC QIO-IR1x4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret QSC Manualer

13 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

11 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

T'nB MHMECA Manual

18 September 2025

Marmitek BoomBoom 55 HD Manual

18 September 2025

CTA Digital PAD-HFS Manual

18 September 2025

Vestil ATP-C-2436 Manual

18 September 2025

Active Intent Play GSBV16T Manual

18 September 2025

Vestil D-33-MD Manual

18 September 2025

Vestil LAD-13-14-P Manual

18 September 2025

Cambro VBRTHD6110 Manual

18 September 2025

Vicoustic VicFix Base Manual

18 September 2025

Vestil LAD-10-14-P Manual

18 September 2025