Pyle PWPLGULT214 Manual

Pyle Ikke kategoriseret PWPLGULT214

Læs gratis den danske manual til Pyle PWPLGULT214 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Pyle PWPLGULT214, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
readings prior to the installation of the wall plate to ensure
power has been disconnected.
Do not remove the outlet's wall plate until you are
certain that the outlet is not live. Exposed, live 120 volt AC
devices such as wall outlets and light switches can cause
severe injury, even death.
2. REMOVE THE EXISTING FACE PLATE COVER
Using a at head screwdriver, remove the existing wall
plate. The screw is located above and bottom of the wall
socket. Turn the screwdriver counter-clockwise to remove
the screw.
3. INSTALL USB WALL PLATE CHARGER
Line up the Decor outlet hole in the USB wall plate over
the socket of the exposed outlet and press the wall plate
on to the outlet. Ensure the 2 metal contacts on the back
of the wall plate are alligned with the metal costal contacts
on the sides of the wall electrical outlet. Install the top and
the bottom screws provided with the wall plate, to attach
the wall plate to the outlet. Turn the screwdriver clockwise
to tighten the walk plate rmly against the wall.
Snap-On Easy USB Charge Wall Plate Frame
Smart USB Charge Wall Power Outlet Cover Plate,
Snap-On USB Charging with Built-in Night-Light
PWPLGULT214
This USB wall plate is the easiest way to
add USB Fast-Charging capability to 15
Amp standard decor electrical outlets in
a home or business. For 20Amp outlets,
contact the dealer for alternate units.
Simply replace an existing single decor
wall plate with the Charger and enjoy
easy device charging that's always
ready to go.
The wall plate connects to a 15 amp standard decor outlet
and provides 2 USB charging ports without using up either
outlet electrical socket.
Please follow these directions carefully to safely install this
product.
CAUTION
It is critical to conrm that power has been shut o from the
fuse panel or circuit breaker box to the designated outlet
before starting the replacement. Teplacement of electrical
system wall plates cannot be done safely unless power has
been disconnected at the breaker panel or fuse panel for the
property. Test the outlet, with a voltage meter capable of
making the proper readings prior to the installation of the
wall plate, to ensure power has been disconnected.
You need to prepare a at head screwdriver for this installation.
INSTALLATION
Installing this wall plate takes just 3 simple steps:
1. TURN OFF THE POWER
Locate the electrical cuto point (breaker panel, fuse panel,
etc.) for the outlet to be used. Turn o the breaker switch or
remove the fuse.
Hint - It may help to plug in a lamp or similar device to the
outlet and turn it on. When you have found the correct
breaker or fuse, the light will go out. Additionally test the
outlet with a voltage meter capable of making the proper
1
2
3
Restart power to the outlet after confirming that the
installation is correct!
Congratulation! Your already finished the installation and now
just start to charge.
1. SPECIAL NIGHT LIGHT DESIGN
This wall plate charger has a built-in light sensor for night
light function. The sensor is at the lower right corner of the
charger and the LED light at the bottom of the charger with
15 lumens. The LED light will stay ON and shuts OFF
automatically base on the rooms lighting, no need any
adjustment by hand.
This special night light feature provides convenience to light
your way during dark.
CLEANING
Clean the charger with a soft,dry cloth. lf a mild detergents
needed to clean tougher spots, shut o the outlet from the
fuse panel or circuit braker box and make sure that no
moisture gets inside the USB ports or outlet on the front of
the unit.
SUPPORT
If you have any questions or concerns which
are not addressed in this document, please
contact PyleUSA tech suupport. Do not
attempt to troubleshoot any electrical outlet
without proper training.
1 2

Produkt Specifikationer

Mærke: Pyle
Kategori: Ikke kategoriseret
Model: PWPLGULT214

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PWPLGULT214 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Pyle Manualer

Pyle

Pyle PCRMP2DY Manual

2 Januar 2026
Pyle

Pyle PWPLGULT214 Manual

10 November 2025
Pyle

Pyle PCRBDR21 Manual

23 September 2025
Pyle

Pyle PCRMP2DG Manual

25 August 2025
Pyle

Pyle PMKS7 Manual

13 August 2025
Pyle

Pyle PWA15BT Manual

9 August 2025
Pyle

Pyle PLEDFN8 Manual

9 August 2025
Pyle

Pyle PSV300 Manual

9 August 2025
Pyle

Pyle PHUD19 Manual

9 August 2025
Pyle

Pyle PRMDC40 Manual

8 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM

IFM E43416 Manual

2 Januar 2026
Testboy

Testboy TV 285 Manual

2 Januar 2026
Pioneer

Pioneer 2AM700 Manual

2 Januar 2026
Ruvati

Ruvati RVH7419 Manual

2 Januar 2026
Vaxcel

Vaxcel T0703 Manual

2 Januar 2026
Govee

Govee H1167 Manual

2 Januar 2026
Ruvati

Ruvati RVH9733 Manual

2 Januar 2026
Sonnenkönig

Sonnenkönig Slim E 1000 Manual

2 Januar 2026
Asus

Asus Prime AP202 Manual

2 Januar 2026
Sterling

Sterling 71320116 Manual

2 Januar 2026