Quadralite Stroboss 60 II Manual

Quadralite Blitz Stroboss 60 II

Læs gratis den danske manual til Quadralite Stroboss 60 II (18 sider) i kategorien Blitz. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Quadralite Stroboss 60 II, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/18
Foreword
Thank You for purchasing this product.
This Stroboss 60 II camera flash applies to camera compatible with TTL autoflash. With this TTL
compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure
even in complex light-changing environments. This camera flash features:
•Approx. GN60 (ISO 100,@200mm), 81 steps from 1/1 to 1/256.
•Fully support TTL camera flash. Workable as Transmitter or Receiver unit in a wireless
flash group.
•Use dot-matrix LCD panel to make clear and convenient operations.
•With built-in 2.4GHz wireless remote system to support transmitting and receiving.
•Provided multiple functions, include HSS (up to 1/8000s), FEC, etc.
•Stable consistency and color temperature with good even lighting.
•Support with firmware upgrade.
Warning
•Always keep this product dry. Do not use in rain or in damp conditions.
•Do not disassemble. Should repairs become necessary, this product must be sent to an
authorized maintenance center.
•Keep out of reach of children.
Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise,
electric shock may occur if you touch the electonic parts inside it.
•Do not fire the flash directly into the eyes (especially those of babies) within short
distances. Otherwise cisual impairment may occur.
•Do not use the flash unit in the presence of flammable gases, chemicals and other
similar materials. In certain circumstance, these materials may be sensitive to the strong
light emitting from this flash unit and fire or electromagnetic interference may result.
•Do not leave or store the flash unit if the ambient temperature reads over 50°C.
Otherwise the electronic parts may be damaged.
•Turn off the flash unit immediately in the event of malfunction.
Conventions used in this Manual
•This manual is based on the assumption that both the camera and camera flash's power
switches are powered on.
•The automatic light measurement system is marked in this manual with the , which isTTL
the correct abbreviation for the Sony brand, for other brands these are (Nikon), i-TTL
etc.
•The pictures show an example lamp for the Canon system.
•The following alert symbols are used in this manual:
The Caution symbol indicates a warning to prevent shooting problem.
The Note symbol gives supplemental information.
-2-
CONTENTS
2 Foreword
2 Warning
4 Name of Parts
4 - Body
4 - Control Panel
5 - LCD Panel
5 - LCD Panel in Three Modes
6 What's in the Box of Stroboss 60 II?
6Separately Sold Accessories
6 Loading and Unloading the Battery
6 Attaching to a Camera
7 Power Management
7 Flash Mode – TTL Autoflash
7- FEC (Flash Exposure Compensation)
7 - High-Speed Sync
8 - Second-Curtain Sync
8 M: Manual Flash
9 Multi: Stroboscopic Flash
9 Wireless Flash Shooting: Radio (2.4G) Transmission
10 - Wireless Settings
10 - Transmitter Unit's Flash OFF
11 - Setting the Comunication Channel
11 - Wireless ID Settings
11 - Scan the Spare Channel
12 - TTL: Fully Automatic Wireless Flash Shooting
13 - M: Wireless Flash Shooting with Manual Flash
14 - Multi: Wireless Flash Shooting with Manual Flash
14 Other Applications
14 Sync Triggering
14 Auto Focus Assist Beam
14 Bounce Flash
15 ZOOM: Setting the Flash Coverage
15 Low Battery Warning
16 C.Fn: Setting Custom Functions
16 Protection Function
17 Technical Data
18 Troubleshooting
18 Firmware Upgrade
18 Compatible Camera Models
18 Maintenance
-3-
Name of Parts
Body
01 Flash Head 07. Battery Cover
02 Built-in Wide Panel 08. Hotshoe
03. Wireless Sensor 09. LCD Panel
04. Focus Assist Beam 10. Hotshoe Fixing Buckle
05. Sync Cord Jack 11. External Charging Port
06. Type-C USB Port
Control Panel
11. <MENU> Flash Menu Button 18. <MODE> Mode Selection Button
12. < > Wireless Selection Button 19. < > Lock Setting
13. Select Dial 20. <+/-> Power Output
14. Set Button 21. Function Button 1
15. ON/OFF Power Switch 22. Function Button 2
16.< > Test Button Flash Ready Indicator 23. Function Button 3
17. <ZOOM> Focus Length Setting 24. Function Button 4
-4-
LCD Panel
(1) TTL Autoflash
•The display will only show the settings currently applied.
•The functions displayed above function buttons 1 to 4, such as and
<M/A/B/C>, change according to setting's status.
•The LCD panel will lighten on when buttons and dials are operated.
(2)M: Manual Flash
(3) Multi Flash
(4) Radio Transmission Shooting
Transmitter Unit (TX)
Receiver Unit (RX)
LCD Panel in Three Modes
Attached to the Camera
-5-

Produkt Specifikationer

Mærke: Quadralite
Kategori: Blitz
Model: Stroboss 60 II

Har du brug for hjælp?

Hvis du har brug for hjælp til Quadralite Stroboss 60 II stil et spørgsmål nedenfor, og andre brugere vil svare dig


Blitz Quadralite Manualer

Quadralite

Quadralite Stroboss 60 II Manual

3 September 2024

Blitz Manualer

Nyeste Blitz Manualer

Neewer

Neewer RF1-N Manual

29 Marts 2025
Neewer

Neewer RF1-S Manual

29 Marts 2025
Bresser

Bresser BRM-300AM Manual

27 Marts 2025
Rollei

Rollei Studio 300 Manual

9 Marts 2025
SmallRig

SmallRig 4774 Manual

26 Februar 2025
Smith-Victor

Smith-Victor Orbit Pro Manual

24 Februar 2025
Pelican

Pelican MityLite 1900 Manual

28 Januar 2025
Neewer

Neewer NW665 Manual

8 Januar 2025
Godox

Godox V100 S Manual

8 Januar 2025
Godox

Godox V100 O Manual

8 Januar 2025