Assembly Instruction Sheet #IS-TFVY6325VA
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
A. Thread short nipple end of the Stem into the Coupling on the top
center of the Base. Hand tighten until snug.
B. Place the Flat Washer and the Shade over the top end of the Stem.
Secure by threading the Finial onto the Stem. Hand tighten until
C. This fixture uses standard bulb with medium base . Maximum 100
watts. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
NOTE: ALL DIMENSIONS ARE ROUNDED
REPLACEMENT PART DESCRIPTION
Please go to for product cleaning tips. Go to the selection.
(2) A19 Medium Base 100W Maximum, Alternate bulb (2) 23W CFL
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
www.quoizel.com Care + Maintenance
