Radioddity GC-5 Manual

Radioddity Walkie talkie GC-5

Læs gratis den danske manual til Radioddity GC-5 (2 sider) i kategorien Walkie talkie. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Radioddity GC-5, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Radioddity GC-5 Manual Programming Steps
To enter a channel from the front panel, the steps below should help:
The Menu(Green) key is used to invoke the Menu system, Enter the selection part of an option, and
Confirm that option.
The Back (Red) key is used to exit a Menu option (or it will automatically return after a short delay)
Once the repeater Receive frequency is entered via the VFO Mode and using the Keypad, the Menu
options will help you set the other parameters.
Example:
146.685 Receive frequency
The offset is .6 MHz
Shift Direction is - (minus)
Transmit CTCSS Tone is 100 Hz
Receive CTCSS Tone is 100 Hz
Enter VFO (Frequency) Mode using VFO/MR key.
Use the Keypad to enter 145685 (the Decimal Point and extra 2 Zeros will be added automatically)
Press Menu, Option 2 TX power
Press Menu to Select
Use Up/Down Arrows as needed to select the Power setting
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 1 2 to set TX CTCSS tone
Press Menu to Select
Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), scroll to 100.0
Hz
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 1 0 to set RX CTCSS tone
Press Menu to Select
Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), Scroll to 100.0
Hz
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 2 8 to set Shift Direction
Press Menu to Select
Use Up/Down Arrows as needed to scroll to Minus
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 2 9 to set the Frequency Offset
Press Menu to Select
Enter 000600 (The decimal point is automatically inserted after the 3rd digit is entered.)
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 3 0 to set the Channel to store the settings
Press Menu to Select
Use Up/Down arrows as needed to find a blank (unused) Channel.
Channels that have been used to store memory will have CH preceding the number.
Press Menu to Confirm (when a blank channel number had been selected)
Voice Prompt: Receiving Memory
Exit to Return
Once Menu is pressed, you can use the Up/Down arrows to scroll through the settings, or directly
address them using a 2 digit selection.-
Additional settings can be selected as needed prior to storing the channel.
If a setting needs to be altered after the channel is stored, the channel will need to be deleted using
Menu option 31, then saved to the same channel using the additional options.

Produkt Specifikationer

Mærke: Radioddity
Kategori: Walkie talkie
Model: GC-5

Har du brug for hjælp?

Hvis du har brug for hjælp til Radioddity GC-5 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Walkie talkie Radioddity Manualer

Radioddity

Radioddity FS-T1 Manual

16 Juli 2025
Radioddity

Radioddity DB25-G Manual

16 Juli 2025
Radioddity

Radioddity CS-47 Manual

16 Juli 2025
Radioddity

Radioddity GC-5 Manual

15 Juli 2025

Walkie talkie Manualer

Nyeste Walkie talkie Manualer

Icom

Icom IP501M Manual

3 September 2025
President

President Johnson II VOX Manual

3 September 2025
Motorola

Motorola EX560XLS Manual

1 September 2025
Motorola

Motorola XTNiD Manual

1 September 2025
Motorola

Motorola DTR600 Manual

1 September 2025
Motorola

Motorola APX 6000XE Manual

1 September 2025
Motorola

Motorola EX500 Manual

1 September 2025
Yaesu

Yaesu FT-470 Manual

1 September 2025
Yaesu

Yaesu FT-11R Manual

31 August 2025
Yaesu

Yaesu FT5DR Manual

31 August 2025