Radson Menai E Manual

Radson Komfur Menai E

Læs gratis den danske manual til Radson Menai E (4 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Radson Menai E, eller vil du spørge andre brugere om produktet?

Side 1/4
1
Menai E
Dimensions / Afmetingen
in / en mm
NL
Mounting instructions
Instruction de montage
Montagehandleiding
ENG
FR
119
127
60
C
B
weight
poids
gewicht
output
puissance
vermogen
type B C [kg] [watt]
ME300700EL 300 700 12,00 500
ME300980EL 300 980 17,00 800
ME3001180EL 300 1180 21,00 1000
ME3001420EL 300 1420 25,00 1200
ME3001940EL 300 1940 33,00 1600
ME3002340EL 300 2340 39,00 2000
ME500420EL 500 420 10,00 500
ME500620EL 500 620 16,00 800
ME500780EL 500 780 21,00 1000
ME500900EL 500 900 24,00 1200
ME5001180EL 500 1180 32,00 1600
ME5001420EL 500 1420 38,00 2000
stock Radson
B = height - hauteur - hoogte
C = lenght - longueur - lengte
2
INSTALLATION INSTRUCTIONS
Electrical appliance
STANDARDS
The electrical appliance is conform to the standards
EN 60.335-1 and 60.335-2-30.
The heating appliances are double insulated - Class II and
splash resistant. The appliances also comply with European
directive 2004/108/EC (CE Marking on all appliances).
POSITIONING
The appliances must be positioned
according to the
standards in force in that regard.
The appliance may be positioned in volume 2 of the bath-
room, insofar as no operating controls (button, switch,
etc.) are in reach of persons in the bath or under the
shower.
The bottom of the control must be a minimum of 150
mm above oor level.
The appliance must be positioned a minimum of 50 mm
from the wall and not be located underneath an electric
socket.
WARNING: For the safety of young children it is advisable to
position the appliance in such a way that the lowest heated
part is a minimum of 600 mm above oor level.
CONNECTION
The appliance is designed for single-phase 230 V ~ 50 Hz.
The appliance must be connected to the electrical
network, by means of the original power cable, via a wall
socket (not with a plug and socket!) located behind the
appliance and a minimum of 250 mm above oor level.
Neutral: grey wire - Phase: brown wire - Control wire (pilot
wire): black wire (if this control/clock-function is present).
Use of the control wire makes it possible to decrease the
temperature if connected to an adapted clock. Open end
means comfort temperature, connected to phase means
reduced temperature. The wire may never be connected
to the earth and must be isolated if this function is not
used.
If the power cable is damaged it must be replaced with
an appropriate cable. This replacement may only be
carried out by the manufacturer, its after sales service or
equivalent qualied persons, this is to prevent any danger.
This appliance is lled with a specic amount of heat
conducting uid (not applicable for the models Likoma
E, Amirante E and Cosmoledo E). If it has to be opened to
carry out repairs then this must only be carried out by the
manufacturer, the manufacturer’ s after sales service
provider, who must be contacted in the event of a leak of
the heat conducting uid.
According to the standards in force a separating
omnipolar switch must be provided.
The distance between the contacts will be a minimum of
3 mm.
If the appliance is installed in a bathroom or shower room
it must be safeguarded with a differential switch with a
maximum of 30 mA.
When disposing of this appliance, the heat conducting
uid must be removed by certied subcontractors (not
applicable for the models Likoma E, Amirante E and
Cosmoledo E).
FIXING
“For the correct installation of the appliances it is essential
that the xing of the appliance is carried out in such a way
that it is suitable for intended use AND predictable misuse.
A number of elements need to be taken into consideration
including the xing method used to secure the appliance to
the wall, the type and condition of the wall itself, and any
additional potential forces or weights, prior to nalising
installation.
MISCELLANEOUS
The appliances are not designed for use by persons (and
children) with physical, sensory or mental disabilities or
persons with a lack of experience or knowledge, unless
under the supervision of, or have received the necessary
instructions regarding the use of the appliance, from
a person responsible for their safety. Children should
be supervised to ensure that they do not play with the
appliance.
WARNING: In order to avoid
overheating, do not cover the
appliance. “Do not cover” means that
the appliance must not be used for
drying clothes, for example, by placing
them directly on the appliance.
ENG
WASTE DISPOSAL ACCORDING TO THE WEEE DIRECTIVE (2002/96/EC)
The symbol on the product label indicates that the product may not be handled as domestic waste, but must be sorted separately.
When it reaches the end of its useful life, it shall be returned to a collection facility for electrical and electronic products.
By returning the product, you will help to prevent possible negative effects on the environment and health to which the product
can contribute if it is disposed of as ordinary domestic waste. For information about recycling and collection facilities, you should
contact your local authority/municipality or refuse collection service or the business from which you purchased the product.
Applicable to countries where this Directive has been adopted.


Produkt Specifikationer

Mærke: Radson
Kategori: Komfur
Model: Menai E

Har du brug for hjælp?

Hvis du har brug for hjælp til Radson Menai E stil et spørgsmål nedenfor, og andre brugere vil svare dig