RDL FP-MX4 Manual

RDL Stavblender FP-MX4

Læs gratis den danske manual til RDL FP-MX4 (2 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18 anmeldelser. Har du et spørgsmål om RDL FP-MX4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

FLAT-PAK

™

SERIES

Model FP-MX4

Mic / Line Mixer



Four Channel Audio Mixer



Balanced Microphone and Line Inputs



Balanced Microphone and Line Outputs



Switch Selectable 24 V Mic Phantom



Three Switch Selectable Mic Gain Ranges



Studio Quality, Low Noise Performance



Convenience of RDL FLAT-PAKs

The FP-MX4 is part of the group of versatile FLAT-PAK products from Radio Design Labs. The unique FLAT-PAK case can be directly screwed or

bolted to cabinets or shelves. Optionally available rack-mounting accessories permit single or multiple FLAT-PAK module mounting.

All FLAT-PAK modules are supplied with a power interconnect cable for daisy-chaining multiple modules from a single power supply.

APPLICATION: The FP-MX4 is the ideal choice in many applications requiring mixing of microphone and line level

sources at preset levels. Power connections are made using either the full-size barrier block terminals or a dc power

jack located in one end panel. A second dc power jack is provided on the other end panel for connecting additional

FLAT-PAK modules.

The FP-MX4 is a single channel audio mixing module featuring four identical inputs. Each input section has a

detachable terminal block, a source selection switch and a microphone gain switch. The output section provides four

mixing potentiometers corresponding to the four inputs, a detachable terminal block for the audio outputs and a level

indicator.

Either microphone or line level audio is connected to each input terminal block. Each input may be wired balanced

or unbalanced. The source switch selects from three inputs types: LINE (line level at +4 dBu), MIC (microphone

level without phantom), MICPH (microphone level with 24 V phantom). For either microphone input setting, a

separate MIC GAIN switch selects: LOW HIGH (35 dB – 45 dB), MED (45 dB – 55 dB), (55 dB – 65 dB). Separate

source and gain switches are provided for each input channel, allowing any combination of 4 sources to be used

simultaneously. The microphone inputs feature RDL’s exclusive low noise discrete preamplifier stage providing

performance usually reserved for studio equipment.

The four mixing potentiometers are intended to be set at installation or to be adjusted occasionally. The shafts may

be adjusted either using a small screwdriver or manually without any tools. Any unused channel may be turned

completely off. The output section provides both a balanced line (+4 dBu) and balanced microphone level (-45 dBu)

output. Both outputs may be used at the same time.

Output level adjustment is simplified by the dual LED output meter which follows standard VU ballistics. A green

LED illuminates at 15 dB below +4 dBu. The intensity of the green LED progresses from minimum at -11 dBu to full

intensity at +4 dBu. The adjacent red LED illuminates at +4 dBu. The audio may be adjusted for maximum intensity

of the green LED. Flashing of the red LED is equivalent to a VU meter needle swinging above the 0 level.

The FP-MX4’s low profile and compact size permit mounting in confined spaces and in various locations in

equipment racks. The location of the input/output jacks permits high-density mounting against flat surfaces while

maintaining accessibility to the connectors. The wide variety of input signal levels and internal selectable phantom

powering make the FP-MX4 ideal in diverse installations. The FP-MX4 may be mounted where needed, to rack

sides or in an equipment rack (either the front or rear rack rails) using the RDL FP-RRA. Use the FP-MX4

individually, or combine it with other RDL products as part of a complete audio/video system.

RDL





659 6

St.





Prescott, AZ., USA 86301





(928) 443-9391





FAX (928) 443-9392





www.rdlnet.com

Produkt Specifikationer

Mærke:	RDL
Kategori:	Stavblender
Model:	FP-MX4

Har du brug for hjælp?

Hvis du har brug for hjælp til RDL FP-MX4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stavblender RDL Manualer

21 August 2024

20 August 2024

19 August 2024

19 August 2024

18 August 2024

17 August 2024

17 August 2024

17 August 2024

23 April 2024

28 Januar 2024

Stavblender Manualer

Nyeste Stavblender Manualer

Italian Stage 2MIX4PRO Manual

18 December 2025

Italian Stage 2MIX8PRO Manual

17 December 2025

Hanseatic 98126929 Manual

15 December 2025

Maestro MR-501 Manual

8 December 2025

Maestro MR-503 Manual

7 December 2025

Gorenje HBX1500VS Manual

3 December 2025

Sunbeam Mixmaster HeatSoft MXM7000WH Manual

3 December 2025

Gorenje HBX1500VX Manual

2 December 2025

Lakeland 61781 Manual

2 December 2025

Sunbeam Mixmaster MXM5000 Manual

1 December 2025