RDL ST-MX2 Manual

RDL Stavblender ST-MX2

Læs gratis den danske manual til RDL ST-MX2 (2 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om RDL ST-MX2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

STICK-ON® SERIES

Model ST-MX2

Universal Audio Mixer

 Two Input Audio Mixing

 Selectable Mic or Line Level Inputs

 Simultaneous Mic and Line Outputs

 Add Additional Inputs to an Existing Mixer

 Audio Output Dual-LED VU Metering

 Balanced or Unbalanced Inputs and Outputs

 Low Noise and Low Distortion Performance

The ST-MX2 is part of the group of versatile STICK-ON products from Radio Design Labs. STICK-ONs feature the advanced circuitry for which

RDL products are known, combined with unequalled versatility in mounting possibilities. The durable adhesives provided with the ST-MX2 permit

permanent or removable mounting. Numerous available mounting accessories, brackets, rack-mount and tabletop chassis are optionally available

to facilitate any system. STICK-ONs are designed, built and rated for continuous duty in professional A/V systems.

FUNCTIONAL DESCRIPTION: The ST-MX2 is a two channel audio mixer. Each input channel is identical. Pin

jumpers adjacent to each audio input permit the installer to set that input for either mic or line level. The mic input

accepts low impedance balanced microphones (150  nominal) or high impedance unbalanced microphones

(5- -knominal). The line inputs are 20 k bridging and accept either unbalanced or balanced audio signals.

A single-turn trimmer is provided for each input channel. The usual range of mic or line level signals may be adjusted

to produce +4dBu at the line level output. The dual LED audio meter provides accurate dynamic level adjustment

without an external meter. A separate mic level output is also provided.

The dual LED output meter follows standard VU ballistics. A green LED illuminates at 15 dB below +4 dBu.

The intensity of the green LED progresses from minimum at -11 dBu to full intensity at +4 dBu. The adjacent red LED

illuminates at +4 dBu. The audio may be adjusted for maximum intensity of the green LED. Flashing of the red LED

is equivalent to a VU meter needle swinging above the 0 level.

Unbalanced audio inputs are converted in the module to balanced. Mic level inputs are preamplified to line level.

Either input may be turned down if it is not used. The combination of input levels, individual input adjustments and

output levels makes the ST-MX2 suited to a wide variety of mixing, summing, preamplification and audio format

conversion applications.

TYPICAL APPLICATION: The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may

be mixed with a line level music source. Two mics may be mixed to feed the mic or line level input of a power

amplifier in a meeting room or choir loft. A mic or professional +4 dBu line level mono sum is possible from stereo

CD players, cassette decks, computer sound cards, televisions, and a wide variety of other unbalanced sources. If a

single input channel is used, the ST-MX2 may be used to convert mono line level signals from consumer to

professional, or from professional to consumer format. It may also be used as a microphone preamplifier, or

conversely to adapt unbalanced or balanced line level signals into the microphone input of other equipment.

The audio clarity, low noise, low distortion and versatility make this module ideally suited to a wide variety of

demanding audio applications. Use this module individually, or in conjunction with other RDL modules as part of a

high quality, flexible audio/video system.

RDL 



 659 6th St. 



 Prescott, AZ., USA 86301 



 (928) 443-9391 



 FAX (928) 443-9392 



 www.rdlnet.com

STICK-ON® SERIES

Model ST-MX2

Universal Audio Mixer

TYPICAL PERFORMANCE

Inputs (2): Selectable mic or line

Input range for +4 dBu output:

Mic: -45 dBu to -65 dBu; max input: -28 dBu

Line:

-18 dBV to +10 dBu max input: +22 dBu

Input impedance: Mic: 200 ; Line: 20 k bridging

Input or output configuration: Balanced or unbalanced

Outputs (2): MIC and LINE

Output impedance: 150  (mic or line)

Frequency Response:

Mic: 25 Hz to 50 kHz (± 1 dB)

Line: 10 Hz to 30 kHz (± 0.25 dB)

THD+N:

Mic: < 0.05% (25 Hz to 20 kHz)

Line: < 0.005%

IMD: < 0.004%

Output Level: Mic: -45 dBu; line: +4 dBu

Headroom:

Mic Input: > 22 dB (rel. –50 dBu)

> 32 dB (rel. –60 dBu)

Line Input: > 18 dB (rel. +4 dBu)

Output: > 20 dB (rel. +4 dBu)

Noise (below +4 dBu):

Mic: < -70 dB (150 Ω source, 50 dB gain),

< -80 dB (200 Ω source, 50 dB gain)

Line: < -90 dB (reference +4 dBu, unity gain)

CMRR:

Mic: > 65 dB (50 Hz to 120 Hz)

Line: > 45 dB (50 Hz to 120 Hz)

Ambient Operating Environment: 0° C to 55° C

Power Requirement: GROUND REFERENCED,

24 Vdc @ 60 mA

Installation/Operation

Declaration of Conformity available from rdlnet.com.

Sole EMC specifications provided on product package.

Specifications are subject to change without notice.

891-1075C

Radio Design Labs Technical Support Centers

U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287

Produkt Specifikationer

Mærke:	RDL
Kategori:	Stavblender
Model:	ST-MX2

Har du brug for hjælp?

Hvis du har brug for hjælp til RDL ST-MX2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stavblender RDL Manualer

21 August 2024

20 August 2024

19 August 2024

19 August 2024

18 August 2024

17 August 2024

17 August 2024

17 August 2024

23 April 2024

28 Januar 2024

Stavblender Manualer

Nyeste Stavblender Manualer

Rane AM2 Manual

15 Juni 2025

Girmi SB04 Manual

14 Juni 2025

Midas HD96-AIR Manual

12 Juni 2025

Gourmia GBJ190 Manual

11 Juni 2025

Gourmia GHB2360 Manual

10 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

8 Juni 2025