Ridgid R1500 Manual

Ridgid bore R1500

Læs gratis den danske manual til Ridgid R1500 (52 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 46 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 23.5 anmeldelser. Har du et spørgsmål om Ridgid R1500, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/52
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
15 in. DRILL PRESS
381 mm (15 po) PERCEUSE À COLONNE
TALADRADORA DE COLUMNA DE
381 mm (15 pulg.)
R1500
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
WARNING:
To reduce the risk of injury, the
user must read and understand the
operator’s manual before using this
product.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar
este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
TABLE OF CONTENTS
****************
General Safety Rules 2-3 .......................
Specific Safety Rules 4 ..........................
Symbols ...............................................5
Electrical ..............................................6
Features ...............................................7
Assembly ....................................... 8-10
Operation ..................................... 10-12
Adjustments ......................................12
Maintenance ......................................13
Troubleshooting ................................14
Warranty ............................................15
Illustrations .................................. 16-23
Parts Ordering / Service Back Page ......
TABLE DES MATIÈRES
****************
Règles de sécurité générales 2-3 ..........
Règles de sécurité particulières 4 ..........
Symboles .............................................5
Caractéristiques électriques 6 ................
Caractéristiques ..................................7
Assemblage ................................... 8-10
Utilisation ..................................... 10-12
Réglages ............................................12
Entretien ............................................13
Dépannage ........................................14
Garantie .............................................15
Illustrations .................................. 16-23
Commande de pièces /
réparation Page arrière ..........................
ÍNDICE DE CONTENIDO
****************
Reglas de seguridad generales 2-3 .......
Reglas de seguridad específicas ........4
Símbolos .............................................5
Aspectos eléctricos .............................6
Características ....................................7
Armado .......................................... 8-10
Funcionamiento ........................... 10-12
Ajustes ...............................................12
Mantenimiento ...................................13
Corrección de problemas 14 ..................
Garantía .............................................15
Ilustraciones ................................ 16-23
Pedidos de piezas /
servicio ........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
2 - English
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below, may result in
electric shock, fire and/or serious personal injury.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL. Read the operator’s
manual carefully. Learn the applications and limitations
as well as the specific potential hazards related to this
tool.
G U A R D A G A I N S T E L E C T R I C A L S H O C K B Y
PREVENTING BODY CONTACT WITH GROUNDED
SURFACES. For example: pipes, radiators, ranges,
refrigerator enclosures.
and in good working order.KEEP GUARDS IN PLACE
Form REMOVE ADJUSTING KEYS AND WRENCHES.
habit of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
KEEP WORK AREA CLEAN. Cluttered areas and
benches invite accidents. leave tools or pieces DO NOT
of wood on the tool while it is in operation.
DO NOT USE IN DANGEROUS ENVIRONMENTS. Do
not use power tools in damp or wet locations or expose
to rain. Keep the work area well lit.
KEEP CHILDREN AND VISITORS AWAY. All visitors
should wear safety glasses and be kept a safe distance
from work area. Do not let visitors contact tool or
extension cord while operating.
MAKE WORKSHOP CHILDPROOF with padlocks,
master switches, or by removing starter keys.
DON’T FORCE THE TOOL. It will do the job better and
safer at the feed rate for which it was designed.
USE THE RIGHT TOOL. Do not force the tool or
attachment to do a job for which it was not designed.
USE THE PROPER EXTENSION CORD. Make sure
your extension cord is in good condition. Use only a
cord heavy enough to carry the current your product
will draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating. A wire
gauge size (A.W.G.) of at least is recommended for an 14
extension cord 25 feet or less in length. If in doubt, use
the next heavier gauge. The smaller the gauge number,
the heavier the cord.
DRESS PROPERLY. Do not wear loose clothing, gloves,
neckties, or jewelry. They can get caught and draw you
into moving parts. Also wear protective hair covering to
contain long hair.
ALWAYS WEAR EYE PROTECTION WITH SIDE
SHIELDS WHICH IS MARKED TO COMPLY WITH ANSI
Z87.1 WHEN USING THIS PRODUCT.
SECURE WORK. Use clamps or a vise to hold work when
practical, it is safer than using your hand and frees both
hands to operate the tool.
DO NOT OVERREACH. Keep proper footing and balance
at all times.
MAINTAIN TOOLS WITH CARE. Keep tools sharp
and clean for better and safer performance. Follow
instructions for lubricating and changing accessories.
DISCONNECT TOOLS. When not in use, before servicing,
or when changing attachments, blades, bits, cutters, etc.,
all tools should be disconnected from power source.
Be sure switch is off AVOID ACCIDENTAL STARTING.
when plugging in any tool.
USE RECOMMENDED ACCESSORIES. Consult the
operator’s manual for recommended accessories. The
use of improper accessories may result in injury.
NEVER STAND ON TOOL. Serious injury could occur if
the tool is tipped.
CHECK DAMAGED PARTS. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting and any other conditions that may affect
its operation. A guard or other part that is damaged must
be properly repaired or replaced by an authorized service
center to avoid risk of personal injury.
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN
THE POWER OFF. Don't leave tool until it comes to a
complete stop.
PROTECT YOUR LUNGS. Wear a face or dust mask if
the cutting operation is dusty.
PROTECT YOUR HEARING. Wear hearing protection
during extended periods of operation.
DO NOT ABUSE CORD. Never carry tool by the cord or
yank it to disconnect from receptacle. Keep cord from
heat, oil, and sharp edges.
USE OUTDOOR EXTENSION CORDS. When tool is
used outdoors, use only extension cords with approved
ground connection that are intended for use outdoors
and so marked.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE.
Normal sparking of the motor could ignite fumes.
INSPECT TOOL CORDS PERIODICALLY. If damaged,
have repaired by a qualified service technician at an
authorized service facility. The conductor with insulation
having an outer surface that is green with or without yellow

Produkt Specifikationer

Mærke: Ridgid
Kategori: bore
Model: R1500

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid R1500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bore Ridgid Manualer

Ridgid

Ridgid R7001 Manual

12 August 2024
Ridgid

Ridgid R1500 Manual

8 August 2024
Ridgid

Ridgid R7122 Manual

7 August 2024
Ridgid

Ridgid R7111 Manual

6 August 2024

bore Manualer

Nyeste bore Manualer

Einhell

Einhell BM-G1100 E Manual

14 Oktober 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024
DeWalt

DeWalt DWD450 Manual

14 Oktober 2024
Rupes

Rupes BH 252R Manual

13 Oktober 2024
Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Einhell

Einhell TE-ID 750/1 E Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024