RIGEL MEDICAL 62353+ USER MANUAL
1
Rigel Medical 24 Month Warranty Statement
Rigel Medical provides a standard 12-
during normal use. This warranty can be upgraded to a 24-month warranty (terms and
conditions apply*). Problems caused through misuse, damage, fair wear & tear,
consumables and accessories are excluded from standard warranty. Such components
also excluded. Shipping to an authorised service centre is the responsibility of the sender.
*Terms and Conditions of 24 Month Warranty
The Rigel product must be registered with Rigel Medical within 30 days of purchase to be
eligible for the extended 24-month warranty. Instruments must be returned to an
authorised service centre complete with proof of purchase within 13 months of purchase
for calibration at the current rate. Any items returned for calibration outside of the 13-
month period stated above may not be eligible for the second 12-month section of
warranty. The second 12-month section of the warranty begins at the expiry of the initial
12-month period, not when the unit is calibrated.
Details correct at time of going to print. The manufacturer retains the right to make
amendments to the above terms and conditions without prior notice.
Calibration Statement
The Rigel 62353+ Electrical Safety Analyser is fully calibrated and found to be within the
specified performance and accuracy at the time of production. The Seaward Group
provides its products through a variety of channels; therefore, it may be possible that the
calibration date on the provided certificate may not represent the actual date of first use.
Experience has indicated that the calibration of this instrument in not effected by storage
prior to receipt by the user. We therefore recommend that the recalibration period be
based on a 12-month interval from the first date the unit is placed into service.
Date received into service; / / .
© Copyright 2021
All rights reserved. Nothing from this edition may be multiplied, or made public in any
form or manner, either electronically, mechanically, by photocopying, recording, or in any
manner, without prior written consent from the SEAWARD GROUP. This also applies to
accompanying drawings and diagrams.
Due to a policy of continuous development the SEAWARD GROUP reserves the right to
alter the equipment specification and description outlined in this publication without
prior notice and no part of this publication shall be deemed to be part of any contract for
the equipment unless specifically referred to as an inclusion within such contract.
