RIKON 30-140 Manual

RIKON Boremaskine 30-140

Læs gratis den danske manual til RIKON 30-140 (20 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 16 anmeldelser. Har du et spørgsmål om RIKON 30-140, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/20
30-140
www.rikontools.com
30-140M3
34” Radial Bench Drill Press
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877)884-5167
The serial number can be found on the specication label on the rear of your machine.
Safety Warnings....................................................................................................................................3-6
Electrical Requirements........................................................................................................................5,16
Drill Press Safety Rules ..........................................................................................................................6
Contents of Package...................................................................................................................7
Getting To Know Your Drill Press...........................................................................................................8
Installation .........................................................................................................................8
Assembly .............................................................................................................................................9-12
Head Assembly...............................................................................................................................9,10
Installing & Removing the Chuck and Arbor................................................................................................10,11
Installing the Table.......................................................................................................................................12
Adjustments..........................................................................................................................12-15
Head Adjustments ..................................................................................................................................12,13
Table Adjustments.......................................................................................................................................13,14
Changing Spindle Speeds.................................................................................................................14
Setting the Spindle Lock...............................................................................................................................15
Setting the Drill Depth...............................................................................................................................15
Maintenance.......................................................................................................................................15
Wiring Diagram.......................................................................................................................................16
Warranty .............................................................................................................................................16
Troubleshooting ..................................................................................................................................17
Parts Diagram ................................................................................................................................18
Parts List ........................................................................................................................................19
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current model when the
manual was prepared. Changes and improvements may be made at any time, with no obligation on the part of Rikon
Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to ensure that the information in
this manual is correct, to provide you with the guidelines for the proper safety, assembly and operation of this machine.
2
Motor ................................................................................................ 1/3 HP, TEFC
Motor Speed (no load).......................................................................... 1,720 RPM
Volts ............................................................................................................. 120 V
Amps, Hertz ....................................................................................... 5.5 A, 60 Hz
Speed Range (RPM) ........................................................................... 620 - 3,100
Speeds ................................................................................................................ 5
Chuck Size ...................................................................................................... 5/8”
Chuck Taper .................................................................................................... JT3
Drilling Capacity .............................................................................................. 5/8”
Spindle Travel .............................................................................................. 3-1/8”
Spindle Taper .................................................................................................. MT2
Head Rotates ................................................................................................. 360°
Held Tilts .................................................................................. 45° Right , 90° Left
Quill Diameter ............................................................................................ 2-3/16”
Table (LxW) ..................................................................................... 7-3/4” x 7-3/4”
Table Tilts ......................................................................................................... 45°
Table Rotates ................................................................................................. 360°
Maximum Chuck To Table .......................................................................... 10-3/4”
Maximum Chuck To Base .......................................................................... 15-1/4”
Column Diameter ....................................................................................... 2-5/16”
Height ............................................................................................................... 37”
Base Size ...................................................................................... 13-3/4” x 8-1/2”
Net Weight .................................................................................................. 84 lbs.

Produkt Specifikationer

Mærke: RIKON
Kategori: Boremaskine
Model: 30-140

Har du brug for hjælp?

Hvis du har brug for hjælp til RIKON 30-140 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine RIKON Manualer

RIKON

RIKON 30-100 Manual

27 December 2024
RIKON

RIKON 30-251 Manual

27 December 2024
RIKON

RIKON 30-240 Manual

27 December 2024
RIKON

RIKON 30-212VS Manual

27 December 2024
RIKON

RIKON 30-217 Manual

27 December 2024
RIKON

RIKON 30-140 Manual

27 December 2024

Boremaskine Manualer

Nyeste Boremaskine Manualer

MSW

MSW -OOD-1500T Manual

16 August 2025
Milwaukee

Milwaukee M18 2615-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2607-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025
Bosch

Bosch GBH 18 V-26 Manual

13 August 2025
Milwaukee

Milwaukee M18 2801-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 3404 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025