Rockford Fosgate PM100X1K Manual


Læs gratis den danske manual til Rockford Fosgate PM100X1K (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Rockford Fosgate PM100X1K, eller vil du spørge andre brugere om produktet?

Side 1/2
Amplifier Quick Setup
Wire Harness Color Code
Amplier
Source Unit
White Input (-)
Yellow Input (+)
Black Ground
Blue Speaker Out (+)
Green Speaker Out (-)
WHITE = INPUT (-)
BLACK = GROUND
YELLOW = INPUT (+)
GREEN = SPKR OUT (-)
BLUE = SPKR OUT (+)
INPUT (-)
GROUND
INPUT (+)
OUTPUT (-)
OUTPUT (+)
LEFT OUTPUT (+)
LEFT OUTPUT (-)
LEFT SPEAKER RIGHT SPEAKER
RIGHT OUTPUT (+)
RIGHT OUTPUT (-)
INPUT (-)
GROUND
INPUT (+)
OUTPUT (-)
OUTPUT (+)
* Specifications subject to change without notice. Images depict typical setup.
Refer to manual for additional wiring options.
Connect to chassis
ground of vehicle
*Keep grounds as short as possible
1230-61033-01-A
The rubber switch cover needs to be
installed to prevent water and dirt
intrusion into the amplifier. Failure to
install the covers will leave the
amplifier susceptible to damage
from moisture and dirt.
IP67 - Water Resistant
Amplifier Quick Setup
LED - Power / Protect
Power LED illuminates blue when
the unit is turned on.
Protect LED illuminates red if a
short circuit or to low of an
impedance is detected at the
speaker connections. The amplifier
will automatically shut down if this
occurs.
Selectable 12dB/Oct HP Butterworth Crossover
at 60, 80, and 100 Hz.
Crossover - 60/80/100 Hz
Selectable input switch for
impedance capability of the source
unit (radio).
CAUTION: Selecting 2 ohm may
damage the radio if it’s not 2 ohm
stable.
Input - 2/4 ohm


Produkt Specifikationer

Mærke: Rockford Fosgate
Kategori: Modtager
Model: PM100X1K

Har du brug for hjælp?

Hvis du har brug for hjælp til Rockford Fosgate PM100X1K stil et spørgsmål nedenfor, og andre brugere vil svare dig