Römer Kidfix XP Manual

Römer Bilsæde Kidfix XP

Læs gratis den danske manual til Römer Kidfix XP (2 sider) i kategorien Bilsæde. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Römer Kidfix XP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

01 02

Belt guide (bright red)

Release knob

XP-SICT (only KIDFIX XP SICT)

Belt holder (dark red)

ISOFIX insert guides

ISOFIX fastening points (vehicle)

ISOFIT locking arms

Backrest

Seat cushion

ISOFIT settings key

Safety button

Storage compartment

XP-PAD

Adjusting handle of the headrest

Removing the seat cover

1. Moving the headrest of the vehicle seat into the top

position.

2. Unhook the cover hook 19 on the rear of the backrest.

3. Remove the top part of the cover and fold it forwards to

the seat surface.

4. Unhook the cover hook 19 on the front of the backrest.

5. Pull the cover off of the seat surface.

Removing the headrest cover

Unhook the cover loop

on the rear of the backrest.

7. Unhook the cover hook 19 on the front of the backrest.

Pull off the cover of the headrest

►The cover can now be washed.

Please observe the

instructions on the washing label of the cover:

Re-tting the cover

Proceed in reverse order to put on the cover.

5. CARE AND MAINTENANCE

2. INTRODUCTION

We are delighted that our

KIDFIX XP / KIDFIX XP SICT

can safely accompa-

ny your child through a new stage in its life.

In order to protect your child correctly, the

KIDFIX XP/

KIDFIX XP SICT

must always be used and installed as described in these instructions.

If you have any further questions regarding its use, please feel free to contact us:

These instructions use the following symbols stated below:

Symbol Keyword Explanation

DANGER! Risk of severe personal injury

WARNING! Risk of minor personal injury

CAUTION! Risk of material damage

TIP: Useful notes

Instructions that follow a set sequence are numbered.

Example:

1. Press the button...

Belt guide colours

For better differentiation, the two vehicle seat

belts are highlighted in different colours. The di-

agonal seat belt 16 in dark red and the lap belt

15 in bright red. The colour of the belt guides

on the child safety seat follows the same colour

scheme.

4. USE IN THE VEHICLE

Please observe the instructions for using children's restraining systems in the operating

instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems

(see type list) and in vehicles with a 3-point belt.

Please nd the information on the seats approved for child safety seats of the weight classes 15 to

36 kg in the operating instructions of your vehicle.

The KIDFIX XP / KIDFIX XP SICT is approved for two different methods of installation:

Symbol Installation type Approval type Section

with the ISOFIT locking arms on the

ISOFIX fastening points in the vehi-

cle. Observe the vehicle type list.

semi-universal

with the vehicle's 3-point seatbelt universal 9B

This means that the child safety seat may only be used in vehicles that are listed in the

vehicle type list enclosed. This type list is consistently kept up to date. The latest version

can be obtained from us or from www.britax.eu / www.roemer.eu.

You can use your child safety seat as follows:

In the direction of travel Yes

Against the direction of travel no 1)

with 2-point belt no

with 3-point belt2) Yes

with ISOFIX fastening points

(between seat surface and

backrest)

Yes

on front passenger seat Yes

on outer rear seat Yes

on centre rear seat (with

3-point belt) Yes 4)

1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only

if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect

of an airbag.

2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on

belt with an "E" or "e" in a circle).

3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions

in vehicle owner's manual.

4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.

15–36 kg

3. Certification

BRITAX RÖMER

Child safety seat

Testing and certication

In accordance with ECE* R 44/04

Group Body weight

KIDFIX XP

KIDFIX XP SICT

II+III 15 to 36 kg

*ECE = European Standard for Child Safety Equipment

The child safety seat has been designed, tested and certied according to

the requirements of the European Standard for Child Safety Equipment (ECE

R 44/03). The seal of approval E (in a circle) and the approval number are

located on the orange approval label (sticker on the child safety seat).

DANGER!

This approval will be invalidated if you make any modications

to the child safety seat. Only the manufacturer is permitted to

make modications to the child safety seat. The child seat is

approved for use both with and without XP-PAD.

WARNING! Use the KIDFIX XP / KIDFIX XP SICT exclusively for secur-

ing your child in your vehicle. It is in no way suitable as a

seat or toy in the home.

Never secure your child or the child safety seat with a 2-point DANGER!

belt. If you secure your child in the child seat with only a

2-point belt, then in the event of an accident this may cause

serious injuries to your child, possibly resulting in death.

PAGE I

6. DISASSEMBLY AND DISPOSAL

Please ensure that you only use the original BRITAX RÖMER replacement seat

covers, as the seat cover is an integral part of the child safety seat and fulls im-

portant functions to ensure the smooth operation of the system. Replacement seat

covers are available from your dealer or from an ADAC ofce.

• The cover can be removed and washed with a mild detergent in the delicates

programme of the washing machine (30 °C). Please observe the instructions

on the washing label of the cover.

• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use

any caustic cleaning agents (such as solvents).

DANGER! The child seat must not be used without the seat cover.

1. PRODUCT OVERVIEW

1. Operate the release key of your vehicle seat buckle

2. Open the XP-PAD 11 on the Velcro fastener and

remove the diagonal belt 16 .

3. Open the dark red belt holder 03 by pressing back-

wards the key on the belt holder

03 and unthread-

ing the diagonal belt 16 .

Only for installation type A (ISOFIT):

4. To release the ISOFIT fastening, release the green

safety button 08 and the red release button 07 rst

on the one and the on the other side opposite on

another.

►The child safety seat can now be removed.

the child safety seat must always be DANGER!

secured when it is in the vehicle, even if no child is

being transported.

DISPOSAL:

Please observe the waste disposal regulations in your country.

Disposal of packaging Container for cardboard boxes

Seat cover Residual waste, thermal utilisation

Plastic parts According to the labelling in the

corresponding container

Metal parts Container for metals

Belt straps Container for polyester

buckle and tongue Residual waste

16 11

0807

REMOVAL:

UNFASTENING YOUR CHILD:

1. To unfasten your child, use the release button of your vehicle seat buckle.

The XP-PAD can remained applied for easier use on the diagonal TIP!

belt of your vehicle, the diagonal belt must be retensioned before every

journey; see: Section [page II].10 step 12

KIDFIX XP

KIDFIX XP SICT

User instructions

www.britax.eu

2000010039 05/16

15 kg - 36 kg

(~4 Y - 12 Y)

Produkt Specifikationer

Mærke:	Römer
Kategori:	Bilsæde
Model:	Kidfix XP
Bredde:	480 mm
Dybde:	390 mm
Vægt:	7000 g
Produktfarve:	Black,Red,White
Monteringstype:	ISOFIX
Ergonomisk designet:	Ja
type af sikkerhedssele:	3-punkt
Justerbar ryglæn:	Ja
Højde (min.):	670 mm
Højde (maks.):	850 mm
Sidebeskyttelse:	Ja
Gruppe:	2-3 (15 - 36 kg; 3.5 - 12 år)