Rosseto SM381 Manual

Rosseto Komfur SM381

Læs gratis den danske manual til Rosseto SM381 (3 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Rosseto SM381, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
NEED ASSISTANCE? Customer Service Support: 847-763-1215
Address: 3714 Jarvis Avenue Skokie, IL 60076
Website: www.rosseto.com
Multi-Chef
™
Touch Top
Induction Heaters
Instruction & Specification Sheet for Models SM381 and SM382
When using an electrical appliance, basic safety precautions
1 This appliance is intended to be used for commercial
applications such as in kitchens of restaurants, canteens,
hospitals, and commercial enterprises; but not for continu-
ous mass production of food.
2. To avoid fire or shock hazard, check the voltage indicated on
the rating label. Plug the unit into a correct electrical supply
socket that matches the conditions on the rating label.
3. Only use one induction unit per individual electric supply
socket. Do not plug multiple units into power strip.
4. Do not use the appliance if it is damaged in any way, such
as a damaged cord, plug, or cooking plate.
5. Place the unit on a flat, firm, dry surface. Do not operate the
unit on a plastic or soft tablecloth.
6. In order to prevent the risk of electric shock, short circuiting,
or fire, do not cover any part of the induction unit or metal
base.
7. Never put empty cookware on the switched-on
induction heater, as this could cause the cookware to
become distorted or damage the heating coil. Ensure
liquid or food is inside the cookware at all times.
8. The maximum weight that can be put on the induction
cooker is 15lbs/7kg. Do not exceed.
9. Beware of the hot steam that comes from the cookware
to avoid being burned. Do not overfill the cookware to avoid
water splashing out and damage to the appliance.
10. For better performance and maintenance do not operate
the unit for more than two hours continuously.
11. Users with pacemakers should consult with their doctor.
12. Never let the appliance operate without supervision.
Children should not operate the appliance.
13. Do not use the appliance in damp or humid areas such
as an indoor pool area. For indoor use only.
14. Do not operate the appliance in an area where gasoline,
paint, or flammable liquids are used or stored.
15. Disconnect the plug from the outlet when the unit is not
in use. Seize the plug and then pull it out. Do not pull the
cord to pull out the plug.
16. Do not immerse the appliance in water or rinse it under
the tap.
17. The heating plate remains hot after use. Always unplug
the appliance and let it cool completely before cleaning.
18. Warning: if the surface is cracked, switch off the appliance
to avoid the possibility of electric shock.
importaNt safEguarDs
SM381: Single Induction Heater
with 5” Black Metal Base
11.75 x 11.75 x 5” • 120V ~ 60Hz
SM382: Single Induction Heater
with 10” Black Metal Base
11.75 x 11.75 x 10.4” • 120V ~ 60Hz
NEED ASSISTANCE? Customer Service Support: 847-763-1215
Address: 3714 Jarvis Avenue Skokie, IL 60076
Website: www.rosseto.com
Multi-Chef
™
Touch Top
Induction Heaters
Instruction & Specification Sheet for Models BP021, BP022, BP023, BP024
sEttiNg up your proDuct
opEratiNg iNstructioNs
Be sure to read all the instructions before using the Touch Top
Induction Heater.
1. Carefully remove all parts from the carton and inspect each
part. Be sure to remove packaging around entire induction
unit and packaging between induction and base.
2. If a part appears to be damaged or missing, please
contact Rosseto Customer Service.
Parts Included: 1 – Single or Double Metal Base
1 – Single or Double Induction Heater
3. Place induction heater
on the metal base
making sure to guide
the power cord through
the narrow cutout at
the bottom back side
of the metal base.
1. Place the unit on a flat, firm, dry and safe surface.
2. Make sure the cooking plate is clean and dry before
switching on the heater.
3. If an unsuitable cookware is placed on the cooking plate or
if a cookware is removed from the cooking plate, the appli-
ance will show an error on the display. The induction cooker
will shut down automatically if a suitable cookware is not
placed on the cooking plate within one minute.
4. Do not leave the appliance when it is in use. Do not turn the
unit on without food or water inside the cookware.
Do not cover the air inlet or outlet during operation.
5. Do not preheat empty cookware. Because of the speed
and efficiency of the induction range, empty cookware
can quickly overheat and cause damage to the unit.
6. There must be a minimum of 4” (10 cm) between the
induction range and any surrounding surface to allow
sufficient airflow around the unit. Blocking the airflow could
overheat the unit.
cariNg for your bamboo basE
• Use a damp microber cloth to lightly wipe the bamboo
frame clean. Make sure to dry completely.
• Stow your bamboo base in original box to keep it protected.
• Do not place bamboo base in dishwasher or soak in water.
• Do not use alcohol, ammonia, or any chemical-based cleaners.
• Do not use abrasive materials such as scrapers or metal-based
brushes.
suitablE cookwarE
This unit is intended to be used with induction-ready cook-
ware with a flat, ferrous base measuring 4.5 inches (11.4cm) to
10.25 inches (26 cm) wide. This unit is intended for commercial
food service operations only.
• Suitable Cookware: Ferrous Stainless Steel, Iron, Cast Iron
• Unsuitable Cookware: Pottery, Glass, Aluminum, Bronze,
or Copper Cookware. Cookware with footed base.
usiNg thE touch top iNDuctioN hEatEr
Turning the Induction Heater On
Plug-in the induction heater. One horizontal line will flash on
the LED screen. Position an induction compatible cookware in
the middle of the cooking plate, ensure liquid or food is inside
the cookware. Press the “ON/OFF” button. The screen will
show a moving red line.
Adjusting the Heat Temperature Settings
Press the “+ / -” button to select a temperature setting. A corre-
sponding number will appear on the touch top screen.
Use “+ / -” buttons to increase or decrease temperature setting.
The heat settings for the single induction unit range from 1–3.
The heat settings for the double induction unit range from 1–5.
Turning the Induction Heater Off
Press ON/OFF button. One horizontal line will appear. The fan
will continue to run for 60 seconds, allowing the unit to cool.
Do not unplug unit until fan shuts down. Do not handle or
store until the unit is cool.
Single Unit
Display Level
Double Unit
Display Level
Temperature Power* Note
1 1 95–122° F (35–50° C) 650W
2 2 122–149° F (50–65° C) 650W
3 3
4
149–176° F (65–80° C) 650W Default display level
N/A 176–203° F (80–95° C) 650W
N/A 5 Heating function 650W

Produkt Specifikationer

Mærke: Rosseto
Kategori: Komfur
Model: SM381

Har du brug for hjælp?

Hvis du har brug for hjælp til Rosseto SM381 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Komfur Rosseto Manualer

Rosseto

Rosseto SM381 Manual

15 Juni 2025
Rosseto

Rosseto SM382 Manual

15 Juni 2025

Komfur Manualer

Nyeste Komfur Manualer

Dinex

Dinex Smart.Therm II DX811220 Manual

28 September 2025
Klarstein

Klarstein NanoGlow Manual

28 September 2025
AEG

AEG PI6000S80 Manual

28 September 2025
Tesy

Tesy CB 3014 E01 R Manual

28 September 2025
Amana

Amana AER6303MFB Manual

28 September 2025
Amana

Amana AER6603SMS Manual

28 September 2025
Bosch

Bosch NKT815reu Manual

28 September 2025
Tesy

Tesy LB 2007 E04 TRV Manual

28 September 2025
Amana

Amana AGR4203MNS Manual

28 September 2025
Amana

Amana AER5815RCB Manual

28 September 2025