Rosseto SM382 Manual

Rosseto Komfur SM382

Læs gratis den danske manual til Rosseto SM382 (3 sider) i kategorien Komfur. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Rosseto SM382, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

NEED ASSISTANCE? Customer Service Support: 847-763-1215

Address: 3714 Jarvis Avenue Skokie, IL 60076

Website: www.rosseto.com

Multi-Chef

™

Touch Top

Induction Heaters

Instruction & Specification Sheet for Models SM381 and SM382

When using an electrical appliance, basic safety precautions

should always be observed, including the following:

1 This appliance is intended to be used for commercial

applications such as in kitchens of restaurants, canteens,

hospitals, and commercial enterprises; but not for continu-

ous mass production of food.

2. To avoid ﬁre or shock hazard, check the voltage indicated on

the rating label. Plug the unit into a correct electrical supply

socket that matches the conditions on the rating label.

3. Only use one induction unit per individual electric supply

socket. Do not plug multiple units into power strip.

4. Do not use the appliance if it is damaged in any way, such

as a damaged cord, plug, or cooking plate.

5. Place the unit on a ﬂat, ﬁrm, dry surface. Do not operate the

unit on a plastic or soft tablecloth.

6. In order to prevent the risk of electric shock, short circuiting,

or ﬁre, do not cover any part of the induction unit or metal

base.

7. Never put empty cookware on the switched-on

induction heater, as this could cause the cookware to

become distorted or damage the heating coil. Ensure

liquid or food is inside the cookware at all times.

8. The maximum weight that can be put on the induction

cooker is 15lbs/7kg. Do not exceed.

9. Beware of the hot steam that comes from the cookware

to avoid being burned. Do not overﬁll the cookware to avoid

water splashing out and damage to the appliance.

10. For better performance and maintenance do not operate

the unit for more than two hours continuously.

11. Users with pacemakers should consult with their doctor.

12. Never let the appliance operate without supervision.

Children should not operate the appliance.

13. Do not use the appliance in damp or humid areas such

as an indoor pool area. For indoor use only.

14. Do not operate the appliance in an area where gasoline,

paint, or ﬂammable liquids are used or stored.

15. Disconnect the plug from the outlet when the unit is not

in use. Seize the plug and then pull it out. Do not pull the

cord to pull out the plug.

16. Do not immerse the appliance in water or rinse it under

the tap.

17. The heating plate remains hot after use. Always unplug

the appliance and let it cool completely before cleaning.

18. Warning: if the surface is cracked, switch off the appliance

to avoid the possibility of electric shock.

importaNt safEguarDs

SM381: Single Induction Heater

with 5” Black Metal Base

11.75 x 11.75 x 5” • 120V ~ 60Hz

SM382: Single Induction Heater

with 10” Black Metal Base

11.75 x 11.75 x 10.4” • 120V ~ 60Hz

NEED ASSISTANCE? Customer Service Support: 847-763-1215

Address: 3714 Jarvis Avenue Skokie, IL 60076

Website: www.rosseto.com

Multi-Chef

™

Touch Top

Induction Heaters

Instruction & Specification Sheet for Models BP021, BP022, BP023, BP024

sEttiNg up your proDuct

opEratiNg iNstructioNs

Be sure to read all the instructions before using the Touch Top

Induction Heater.

1. Carefully remove all parts from the carton and inspect each

part. Be sure to remove packaging around entire induction

unit and packaging between induction and base.

2. If a part appears to be damaged or missing, please

contact Rosseto Customer Service.

Parts Included: 1 – Single or Double Metal Base

1 – Single or Double Induction Heater

3. Place induction heater

on the metal base

making sure to guide

the power cord through

the narrow cutout at

the bottom back side

of the metal base.

1. Place the unit on a ﬂat, ﬁrm, dry and safe surface.

2. Make sure the cooking plate is clean and dry before

switching on the heater.

3. If an unsuitable cookware is placed on the cooking plate or

if a cookware is removed from the cooking plate, the appli-

ance will show an error on the display. The induction cooker

will shut down automatically if a suitable cookware is not

placed on the cooking plate within one minute.

4. Do not leave the appliance when it is in use. Do not turn the

unit on without food or water inside the cookware.

Do not cover the air inlet or outlet during operation.

5. Do not preheat empty cookware. Because of the speed

and efﬁciency of the induction range, empty cookware

can quickly overheat and cause damage to the unit.

6. There must be a minimum of 4” (10 cm) between the

induction range and any surrounding surface to allow

sufﬁcient airﬂow around the unit. Blocking the airﬂow could

overheat the unit.

cariNg for your bamboo basE

• Use a damp microber cloth to lightly wipe the bamboo

frame clean. Make sure to dry completely.

• Stow your bamboo base in original box to keep it protected.

• Do not place bamboo base in dishwasher or soak in water.

• Do not use alcohol, ammonia, or any chemical-based cleaners.

• Do not use abrasive materials such as scrapers or metal-based

brushes.

suitablE cookwarE

This unit is intended to be used with induction-ready cook-

ware with a ﬂat, ferrous base measuring 4.5 inches (11.4cm) to

10.25 inches (26 cm) wide. This unit is intended for commercial

food service operations only.

• Suitable Cookware: Ferrous Stainless Steel, Iron, Cast Iron

• Unsuitable Cookware: Pottery, Glass, Aluminum, Bronze,

or Copper Cookware. Cookware with footed base.

usiNg thE touch top iNDuctioN hEatEr

Turning the Induction Heater On

Plug-in the induction heater. One horizontal line will ﬂash on

the LED screen. Position an induction compatible cookware in

the middle of the cooking plate, ensure liquid or food is inside

the cookware. Press the “ON/OFF” button. The screen will

show a moving red line.

Adjusting the Heat Temperature Settings

Press the “+ / -” button to select a temperature setting. A corre-

sponding number will appear on the touch top screen.

Use “+ / -” buttons to increase or decrease temperature setting.

The heat settings for the single induction unit range from 1–3.

The heat settings for the double induction unit range from 1–5.

Turning the Induction Heater Off

Press ON/OFF button. One horizontal line will appear. The fan

will continue to run for 60 seconds, allowing the unit to cool.

Do not unplug unit until fan shuts down. Do not handle or

store until the unit is cool.

Single Unit

Display Level

Double Unit

Display Level

Temperature Power* Note

1 1 95–122° F (35–50° C) 650W

2 2 122–149° F (50–65° C) 650W

3 3

149–176° F (65–80° C) 650W Default display level

N/A 176–203° F (80–95° C) 650W

N/A 5 Heating function 650W

Produkt Specifikationer

Mærke:	Rosseto
Kategori:	Komfur
Model:	SM382

Har du brug for hjælp?

Hvis du har brug for hjælp til Rosseto SM382 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Komfur Rosseto Manualer

Rosseto SM381 Manual

15 Juni 2025

Rosseto SM382 Manual

15 Juni 2025

Komfur Manualer

Nyeste Komfur Manualer

Thetford Topline 260 Manual

28 September 2025

Klarstein Illuminosa 4 Manual

28 September 2025

Klarstein VariCook Domino Glass Manual

28 September 2025

Klarstein Ramsey Manual

28 September 2025

Klarstein Firetale Manual

28 September 2025

Klarstein Goldflame 6 Manual

28 September 2025

Klarstein Trifecta 3 Manual

28 September 2025

Klarstein Masterzone 60 Flex Manual

28 September 2025

AEG CIB6694APX Manual

28 September 2025

Besoa Delgado Manual

28 September 2025