Rotel RDV-1050 Manual

Rotel DVD afspiller RDV-1050

Læs gratis den danske manual til Rotel RDV-1050 (38 sider) i kategorien DVD afspiller. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Rotel RDV-1050, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/38
Owner’s Manual
RDV-1050
DVD Player
RDV-1050 DVD Player
Important Safety Instructions
WARNING: There are no user serviceable parts inside. Refer all servicing to qualified
service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to
moisture or water. Do not allow foreign objects to get into the enclosure. If the
unit is exposed to moisture, or a foreign object gets into the enclosure, immedi-
ately disconnect the power cord from the wall. Take the unit to a qualified ser-
vice person for inspection and necessary repairs.
Read all the instructions before connecting or operating the component. Keep this manual so
you can refer to these safety instructions.
Heed all warnings and safety information in these instructions and on the product itself. Fol-
low all operating instructions.
Clean the enclosure only with a dry cloth or a vacuum cleaner. Do not use benzene, thinner or
other organic solvents and disinfectants. These may cause deformation or discoloring.
You must allow a minimum of 10 cm (46 inches) of unobstructed clearance around the unit.
Do not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the component is placed in a bookcase or cabinet, there must be ventilation of the
cabinet to allow proper cooling.
Keep the component away from radiators, heat registers, stoves, or any other appliance that
produces heat.
The unit must be connected to a power supply only of the type and voltage specified on the
rear panel of the unit.
Connect the component to the power outlet only with the supplied power supply cable or an
exact equivalent. Do not modify the supplied cable in any way. Do not attempt to defeat grounding
and/or polarization provisions. Do not use extension cords.
The main plug of the power cordset is a disconnect device of the apparatus. In order to com-
pletely disconnect the apparatus from the supply mains, the main plug of the power cordset
should be unplugged from the mains outlet. The stand-by LED indicator will not be lit up to
show the power cord is unplugged.
Do not route the power cord where it will be crushed, pinched, bent at severe angles, exposed
to heat, or damaged in any way. Pay particular attention to the power cord at the plug and
where it exits the back of the unit.
The power cord should be unplugged from the wall outlet if the unit is to be left unused for a
long period of time.
Immediately stop using the component and have it inspected and/or serviced by a qualified
service agency if:
• The power supply cord or plug has been damaged.
• Objects have fallen or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way
Place the unit on a fixed, level surface strong enough to support its
weight. Do not place it on a moveable cart that could tip over.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment gene rates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio commu-
nications. However, there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to cor-
rect the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or bypassed. Avoid direct
exposure to beam.
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the player;
leave all servicing to qualified service personnel.
WARNING!
To reduce the risk of electrical shock, fires, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose the unit to rain or moisture.
3. Do not touch the power cord or plug with wet hands.
2

Produkt Specifikationer

Mærke: Rotel
Kategori: DVD afspiller
Model: RDV-1050

Har du brug for hjælp?

Hvis du har brug for hjælp til Rotel RDV-1050 stil et spørgsmål nedenfor, og andre brugere vil svare dig


DVD afspiller Rotel Manualer

Rotel

Rotel rdv 985 Manual

3 August 2024
Rotel

Rotel RDV-1045 Manual

3 August 2024
Rotel

Rotel RDV-1093 Manual

27 Juli 2024
Rotel

Rotel RDV-995 Manual

26 Juli 2024
Rotel

Rotel RDV-1080 Manual

23 Juli 2024
Rotel

Rotel RDV-1040 Manual

23 Juli 2024
Rotel

Rotel RDV-1060 Manual

23 Juli 2024
Rotel

Rotel RDV-1050 Manual

21 Juli 2024

DVD afspiller Manualer

Nyeste DVD afspiller Manualer

Curtis

Curtis Sylvania SDVD1030 Manual

17 Juni 2025
Denon

Denon DVD-A1XVA Manual

7 Juni 2025
Sony

Sony DVP-F21 Manual

6 Juni 2025
Sony

Sony DVP-K350 Manual

3 Juni 2025
Sony

Sony DVP-NS300 Manual

2 Juni 2025
Campomatic

Campomatic DVD4910 Manual

2 Juni 2025
Philips

Philips DVP3005 Manual

17 Marts 2025
LG

LG RH387HP Manual

5 Marts 2025
Naxa

Naxa ND-862 Manual

26 Januar 2025
Philips

Philips 2000 series DVP2800 Manual

16 Januar 2025