Rotel RLC-1080 Manual

Rotel Ikke kategoriseret RLC-1080

Læs gratis den danske manual til Rotel RLC-1080 (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Rotel RLC-1080, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

RLC-1080

Power Conditioner

Owner’s Manual

To register your purchase now, go to www.rotel.com

RLC-1080 Power Conditioner

Place the unit on a fixed, level surface strong enough to support its weight.

Do not place it on a moveable cart that could tip over.

Important Safety Information

WARNING: There are no user serviceable parts inside. Refer all servicing

to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, be sure that the

apparatus shall not be exposed to dripping or splashing and that no

objects filled with liquids, such as vases, shall be placed on the apparatus.

Do not use this product in an environment where the relative humidity

may exceed 95% (non-condensing).

Do not allow foreign objects to get into the enclosure. If the unit is exposed

to moisture, or a foreign object gets into the enclosure, immediately

disconnect the power cord from the wall. Take the unit to a qualified

service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component. Keep this manual

so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the product itself.

Follow all operating instructions.

Unplug this device from the wall outlet before cleaning. Clean the enclosure only with a

dry cloth or a vacuum cleaner. Note: A product that is meant for uninterrupted service

and for some specific reason, such as the possibility of the loss of an authorization code

for a cable TV converter, is not intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging this device.

You must allow 10 cm or 4 inches of unobstructed clearance around

the unit. Do not place the unit on a bed, sofa, rug, or similar surface that could block

the ventilation slots. If the component is placed in a bookcase or cabinet, there must be

ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or any other appliance

that produces heat.

The unit must be connected to a power supply only of the type and voltage specified

on the rear panel of the unit. Do not use a plug adapter which defeats the ground pin

of the AC plug.

Connect the component to the power outlet only with the supplied power supply cable

or an exact equivalent. Do not modify the supplied cable in any way. Do not attempt to

defeat grounding and/or polarization provisions. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe angles,

exposed to heat, or damaged in any way. Pay particular attention to the power cord

at the plug and where it exits the back of the unit. After connecting other devices to this

device, do not push the rear of the device up against any surface (wall or shelving unit),

as this may create an undesired bend in the power cords which may break the wire

strands of the cord.

Although this device provides protection against electrical surges, when connecting an

outside antenna or cable system to devices connected to this device, ensure the antenna

or cable system is grounded so as to provide additional protection against voltage

surges and static charges in accordance with Section 810 of the National Electric Code,

ANSI/NFPA No.70 (see illustration).

This device provides a grounding lug at the rear panel for grounding the device to an

external Transient Voltage Surge Suppression (TVSS) device. Ensure this connection is

made in accordance with the instructions provided by the TVSS device.

This device employs Metal Oxide Varisters (MOVs), and other circuitry to protect against

lightning and other sources of voltage surges and sags. It is not necessary to turn this

device or the devices connected to this device, off during a lighting storm.

Do not locate outside antenna systems near overhead power lines, or other electric light

or power circuits, or where it may fall or otherwise come in contact with these power

sources. Do not allow the ladder being used, or the antenna itself to come into contact

with these power sources, as such contact may be fatal.

Do not overload the wall outlet where this device is being connected. Do not overload

this device. Ensure the total load to this device does not exceed that which is listed in the

Specifications section of this manual.

Inspect the line cords. telephone/data cords, or DSS/Cable TV coaxial cables connected

to this device to ensure they remain fully pushed in or attached, and that they are not

frayed or otherwise damaged.

Immediately stop using the component and have it inspected and/or serviced by a

qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation

• The unit has been dropped or damaged in any way

Federal Communications Commission (FCC) Compliance Information

This device complies with Part 68 and Part 15 of the FCC rules. Operation is subject to

the following two conditions: (1) This device must not cause harmful interference, and (2)

This device must accept any interference received, including interference that may cause

undesired operation. As required, the bottom of this equipment contains, among other

information, the Registration Number and Ringer Equivalence Number (REN) for this

equipment. If requested, this information must be provided to the telephone company.

Rotel products are designed to comply with international directives

on the Restriction of Hazardous Substances (RoHS) in electrical

and electronic equipment and the disposal of Waste Electrical and

Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates

compliance and that the products must be appropriately recycled or

processed in accordance with these directives.

Produkt Specifikationer

Mærke:	Rotel
Kategori:	Ikke kategoriseret
Model:	RLC-1080

Har du brug for hjælp?

Hvis du har brug for hjælp til Rotel RLC-1080 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Rotel Manualer

Rotel RKP-901 Manual

14 December 2024

Rotel RVE-1060 Manual

8 September 2024

21 August 2024

20 August 2024

10 August 2024

4 August 2024

4 August 2024

2 August 2024

1 August 2024

Rotel RQ-970BX Manual

31 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AMX NMX-ACC-N9206 Manual

30 Juli 2025

Rockustics Rocquette SweetSpot Manual

30 Juli 2025

Crestron FT2-700-ELEC-PTL Manual

30 Juli 2025

Intermatic LC4527 Manual

30 Juli 2025

T.akustik Melamine Wave 120 Manual

30 Juli 2025

Intellinet 713153 Manual

30 Juli 2025

JUNG RCD2023 Manual

30 Juli 2025

Eibenstock EBW 1300 Manual

30 Juli 2025

Advantech EVA-2310 Manual

30 Juli 2025

ELTA Music PF3 MK2 Manual

30 Juli 2025