Russound ISK2 Manual


Læs gratis den danske manual til Russound ISK2 (10 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Russound ISK2, eller vil du spørge andre brugere om produktet?

Side 1/10
ISK2 Advanced Keypad
Instruction Manual
Product Overview
The ISK2 Advanced Keypad is a single-gang Decora®-
style in-wall keypad for the ComPointintercom system.
Its LCD panel indicates system functions and displays
assignable zone and door labels. The keypad has keys
for selecting zones and door stations, setting volume,
and enabling Do Not Disturb mode. It also has installer-
selectable amber or green backlighting.
The keypad uses one or two external speakers. A built-in
speaker relay allows it to share speakers with an audio
system for high-fidelity communications.
1
2
3
4
5
6
1
2
3
4
5
6
DISPLAY LCD panel shows zone and door station
labels; also shows functions, modes, and volume
TALK KEY Activates microphone for outgoing
communications
NEXT AND PREVIOUS KEYS Scroll through lists on
display; also activate door strike release module
MICROPHONE Picks up user’s voice for communi-
cations and ambient sounds for Listen mode
VOLUME KEYS Control keypad output volume
DND KEY Enables and disables Do Not Disturb
mode for the zone
Installation and Trim
The ISK2 Keypad is designed to install in a standard US
electrical plastic wall box with an internal volume of at
least 18 cubic inches (295 cm3). The keypad occupies a
single gang and accepts a Decora®wall plate. For the
best accessibility, viewability, and microphone reception,
we recommend installing the keypads at a standard ther-
mostat height of 58 to 60 inches (1.5 m). This may vary
according to personal preferences or requirements.
Wiring
ComPoint system components interconnect with CAT-5
cable. Run CAT-5 from the hub location to every keypad
location. If the ComPoint system is sharing speakers
with an audio system, loop the speaker cables through
the keypad locations. If dedicated speakers are being
used, run the speaker cables to the keypads.
When running CAT-5 and speaker cables, avoid running
them near AC power wiring. If you have to run the
cables parallel to electrical wiring, space the cables at
least two feet (0.6 m) from the AC power lines.
Connections
The keypad provides a 110 punch-down connector for
the CAT-5 cable. Use a punch-down tool to connect the
wires according to the connector color code as shown:
The keypad also has an 8-pole screw-terminal connector
for accessing the internal speaker relay. The speakers
connect to the output terminals. The input connectors
are used for connecting an audio system amplifier when
it shares the speakers with the keypad.
Note:
Both speaker output channels must be connected,
since they are wired in series. If you are using only one
dedicated speaker, connect the speaker to one channel
and connect a shorting jumper or a 2-watt power resis-
tor of up to 8 ohms to the other channel. If the CAT-5
BR BR/W G G/W O O/W BL BL/W
BR BR/W G G/W O O/W BL BL/W
110 punch-down connection


Produkt Specifikationer

Mærke: Russound
Kategori: Hi-Fi system
Model: ISK2

Har du brug for hjælp?

Hvis du har brug for hjælp til Russound ISK2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hi-Fi system Russound Manualer

Russound

Russound SMZ8 Manual

21 Februar 2025
Russound

Russound SMZ16-PRE Manual

21 Februar 2025
Russound

Russound CAA66 Manual

1 September 2024
Russound

Russound USRC Manual

1 September 2024
Russound

Russound MCA-66 Manual

1 September 2024
Russound

Russound XTS5.5 Manual

1 September 2024
Russound

Russound BTA-2 Manual

1 September 2024
Russound

Russound KPSC Manual

1 September 2024
Russound

Russound MCA-88 Manual

1 September 2024
Russound

Russound XTSPlus Manual

1 September 2024

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer