RYOBI One+ P223 Manual

RYOBI Boremaskine One+ P223

Læs gratis den danske manual til RYOBI One+ P223 (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om RYOBI One+ P223, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18V BRUSHLESS, 1 in. SDS-PLUS
ROTARY HAMMER DRILL
PERCEUSE À PERCUSSION
ROTATIVE SDS-PLUS DE (1 po)
SANS BALAI DE 18V
TALADRO DE PERCUSIÓN ROTATORIO SDS-
PLUS (1 pulg.) SIN ESCOBILLAS DE 18V
P223
WARNING: To reduce the risk
of injury, the user must read and un-
derstand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings ............................... 2-3
Rotary Hammer Drill
Safety Warnings ................................... 3
Symbols ...............................................4
 Assembly .............................................5
Operation ......................................... 5-8
Troubleshooting ...................................8
Maintenance ........................................9
Illustrations ................................... 10-12
Parts Ordering
and Service .......................... Back page
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques ......... 2-3
Avertissements de sécurité relatifs
perceuse à percussion rotative ............3
Symboles .............................................4
 Assemblage .........................................5
Utilisation ........................................ 5-8
Dépannage ..........................................8
Entretien ...............................................9
Illustrations ................................... 10-12
Commande de pièces
et dépannage ..................... Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctrica ..................... 2-3
Advertencias de seguridad de
taladro percusión rotatorio ..................3
Símbolos ..............................................4
 Armado ................................................5
Funcionamiento ............................... 5-8
Corrección de problemas ....................8
Mantenimiento .....................................9
Illustraciones ................................ 10-12
 Pedidos de piezas
y servicio ......................... Pág. posterior
INCLUDES: Rotary Hammer Drill, Auxiliary
Handle Assembly with Depth Stop Rod,
Operator’s Manual
INCLUT : Perceuse à percussion rotative,
poignée auxiliaire et tige de butée de
profondeur, manuel del utilisation
INCLUYE: Taladro de percusión rotatorio,
mango auxiliar con barra limitadora de
profundidad, manual del operador
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is un-
avoidable, use a ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI reduces the risk of
electric shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.

Produkt Specifikationer

Mærke: RYOBI
Kategori: Boremaskine
Model: One+ P223

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI One+ P223 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine RYOBI Manualer

RYOBI

RYOBI One+ P223 Manual

20 Juni 2025
RYOBI

RYOBI SDS65 Manual

27 Januar 2025
RYOBI

RYOBI ACTIL04 Manual

15 Juli 2024
RYOBI

RYOBI One+ RPD181 Manual

13 December 2023
RYOBI

RYOBI HP412 Manual

29 September 2023
RYOBI

RYOBI RID1801 Manual

10 Juni 2023
RYOBI

RYOBI One+ RPD18C Manual

3 Juni 2023
RYOBI

RYOBI One+ R18PD2 Manual

10 Januar 2023
RYOBI

RYOBI RCD12022 Manual

2 Januar 2023
RYOBI

RYOBI R18DDP Manual

28 November 2022

Boremaskine Manualer

Nyeste Boremaskine Manualer

Vonroc

Vonroc CD514DC Manual

18 Juni 2025
Kraftronic

Kraftronic KT-AS 3,6 Li Manual

18 Juni 2025
Mafell

Mafell BST 650 S Manual

17 Juni 2025
Mafell

Mafell BST 320 Manual

17 Juni 2025
Smart365

Smart365 SM-04-01116 Manual

16 Juni 2025
DeWalt

DeWalt DCK240C2 Manual

16 Juni 2025
Smart365

Smart365 SM-04-01082 Manual

15 Juni 2025
Draper

Draper 70257 Manual

8 Juni 2025
Draper

Draper 56382 Manual

8 Juni 2025
Draper

Draper Storm Force 89523 Manual

8 Juni 2025