RYOBI P241 Manual

RYOBI Boremaskine P241

Læs gratis den danske manual til RYOBI P241 (24 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om RYOBI P241, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT RIGHT ANGLE DRILL
PERCEUSE 18 V À ANGLE DROIT
18 V TALADRO DE ÁNGULO RECTO
P241
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings ..............................2-3
Drill-Driver Safety Warnings ...............4
Symbols ..............................................5
Features ..............................................6
 Assembly ............................................ 6
Operation .........................................6-8
Maintenance ....................................... 8
Illustrations .........................................9
Parts Ordering and
Service ................................Back page
TABLE DES MATIÈRES
****************
Règles de sécurité générales relatives
aux outils électriques ......................2-3
Avertissements de sécurité relatifs
perceuse-tournevis ............................4
Symboles ............................................5
Caractéristiques .................................6
 Assemblage ........................................6
Utilisation ........................................6-8
Entretien .............................................8
Illustrations .........................................9
Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctrica .................... 2-3
Advertencias de seguridad de
taladro-destornillador ........................4
Símbolos ............................................5
Características ...................................6
 Armado ...............................................6
Funcionamiento .............................. 6-8
Mantenimiento ....................................8
Illustraciones ......................................9
 Pedidos de piezas
y servicio .......................Pág. posterior
2 – English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoid-
able, use a ground fault circuit interrupter (GFCI) pro-
tected supply. Use of a GFCI reduces the risk of electric
shock.
Use this product only with batteries and chargers
listed in tool/appliance/battery pack/charger correla-
tion supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.

Produkt Specifikationer

Mærke: RYOBI
Kategori: Boremaskine
Model: P241

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI P241 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine RYOBI Manualer

RYOBI

RYOBI One+ RPD18 Manual

2 September 2025
RYOBI

RYOBI RYAC701 Manual

31 August 2025
RYOBI

RYOBI P241 Manual

31 August 2025
RYOBI

RYOBI One+ P215 Manual

23 Juni 2025
RYOBI

RYOBI One+ P222 Manual

20 Juni 2025
RYOBI

RYOBI One+ P223 Manual

20 Juni 2025
RYOBI

RYOBI SDS65 Manual

27 Januar 2025
RYOBI

RYOBI ACTIL04 Manual

15 Juli 2024
RYOBI

RYOBI One+ RPD181 Manual

13 December 2023
RYOBI

RYOBI HP412 Manual

29 September 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Bavaria By Einhell

Bavaria By Einhell BAS 18 A Manual

2 September 2025
Craftsman

Craftsman 917.271531 Manual

1 September 2025
Craftsman

Craftsman 917.271530 Manual

1 September 2025
Craftsman

Craftsman 917.881065 Manual

1 September 2025
Craftsman

Craftsman 917.371520 Manual

1 September 2025
DeWalt

DeWalt DWD025S Manual

1 September 2025
DeWalt

DeWalt DW518 Manual

1 September 2025
DeWalt

DeWalt D21815 Manual

31 August 2025
DeWalt

DeWalt DCD733 Manual

31 August 2025
DeWalt

DeWalt D21711 Manual

31 August 2025