RYOBI P214 Manual

RYOBI bore P214

Læs gratis den danske manual til RYOBI P214 (28 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 86 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 43.5 anmeldelser. Har du et spørgsmål om RYOBI P214, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT HAMMER DRILL
PERCEUSE À PERCUSSION
DE 18 V
TALADRO DE PERCUSIÓN
DE 18 V
P214
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Hammer Drill, Auxiliary Handle
Assembly, Operator’s Manual
TABLE OF CONTENTS
****************
General Power Tool Safety Warnings
........................................................2-3
Hammer Drill Safety Warnings 3 ...........
Symbols ..............................................4
 Features ..............................................5
 Assembly ............................................5
Operation .........................................5-8
Maintenance .......................................8
Illustrations ....................................9-10
Parts Ordering and Service
............................................Back page
INCLUT : Perceuses à percussion, poignée
auxiliaire, manual del utilisation
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité relatifs
perceuses à percussion 3 .....................
Symboles ............................................4
 Caractéristiques 5 .................................
 Assemblage ........................................5
Utilisation ........................................5-8
Entretien .............................................8
Illustrations ....................................9-10
Commande de pièces et dépannage
......................................... Page arrière
INCLUYE: Taladros de impacto, mango
auxiliar, manual del operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctrica 2-3 ...................
Advertencias de seguridad de
taladro-destornillador ........................3
Símbolos ............................................4
 Características 5 ...................................
 Armado ..............................................5
Funcionamiento ............................. 5-8
Mantenimiento ...................................8
Illustraciones ................................ 9-10
 Pedidos de piezas y servicio
Pág. posterior ......................................
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY

Keep work area clean and well lit. Cluttered or dark
areas invite accidents.

Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.

Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use battery only with charger listed. For use with 18V
lithium-ion battery packs, see tool/appliance/battery
pack/charger correlation supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.

Produkt Specifikationer

Mærke: RYOBI
Kategori: bore
Model: P214

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI P214 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bore RYOBI Manualer

RYOBI

RYOBI One+ PSBDD02 Manual

6 September 2024
RYOBI

RYOBI One+ PSBHM02 Manual

6 September 2024
RYOBI

RYOBI P214 Manual

4 September 2024
RYOBI

RYOBI ACTIL01 Manual

4 September 2024
RYOBI

RYOBI ACTIL02 Manual

4 September 2024
RYOBI

RYOBI ACTIL03 Manual

4 September 2024
RYOBI

RYOBI D620H Manual

4 September 2024
RYOBI

RYOBI chp 1802m Manual

23 August 2024
RYOBI

RYOBI chi 1802m Manual

22 August 2024
RYOBI

RYOBI eid 1002 re Manual

21 August 2024

bore Manualer

Nyeste bore Manualer

Einhell

Einhell BM-G1100 E Manual

14 Oktober 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024
DeWalt

DeWalt DWD450 Manual

14 Oktober 2024
Rupes

Rupes BH 252R Manual

13 Oktober 2024
Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Einhell

Einhell TE-ID 750/1 E Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024