RYOBI P4002 Manual
RYOBI
Ikke kategoriseret
P4002
Læs nedenfor 📖 manual på dansk for RYOBI P4002 (40 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.3 stjerner i gennemsnit af 6.5 brugere
Side 1/40
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT HYBRID DRAIN AUGER
DÉGORGEOIR POUR TUYAUTERIE
HYBRIDE DE 18 V
BARRENA DE DRENAJE DE HÍBRIDA
DE 18 V
P4002
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Hybrid Drain Auger, Auger
Tip, External Power Supply and Operator’s
Manual
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings 2-3 ..............................
Drain Auger Safety Warnings 4 .............
Electrical 5 .............................................
Symbols 6-7 ...........................................
Features ..............................................8
Assembly ............................................8
Operation .......................................8-12
Maintenance .....................................12
Illustrations ..................................13-14
Parts Ordering
and Service Back page .........................
INCLUT : Dégorgeoir pour tuyauterie
hybride, bout du furet, alimentation
électrique externe et manuel d’utilisation
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité
relatifs dégorgeoir pour tuyauterie 4 .....
Caractéristiques électriques 5 ...............
Symboles 6-7 .........................................
Caractéristiques .................................8
Assemblage ........................................8
Utilisation ......................................8-12
Entretien ...........................................12
Illustrations ..................................13-14
Commande de pièces
et dépannage Page arrière ...................
INCLUYE: Barrena de drenaje híbrida,
punta de la barrena, fuente de alimentación
exterior y manual del operador
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctrica 2-3 ...........
Advertencias de seguridad
de barrena de drenaje 4 .......................
Aspectos eléctricos 5 ...........................
Símbolos 6-7 ........................................
Características ...................................8
Armado ..............................................8
Funcionamiento ........................... 8-12
Mantenimiento .................................12
Illustraciones .............................. 13-14
Pedidos de piezas
y servicio Pág. posterior .......................
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
Use this product only with batteries and chargers listed
in tool/appliance/battery pack/charger correlation
supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
Produkt Specifikationer
| Mærke: | RYOBI |
| Kategori: | Ikke kategoriseret |
| Model: | P4002 |
Har du brug for hjælp?
Hvis du har brug for hjælp til RYOBI P4002 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret RYOBI Manualer
8 April 2025
8 April 2025
8 April 2025
8 April 2025
8 April 2025
7 Februar 2025
27 Januar 2025
27 Januar 2025
24 Januar 2025
4 Januar 2025
Ikke kategoriseret Manualer
- Ikke kategoriseret Remington
- Ikke kategoriseret Videotel Digital
- Ikke kategoriseret Triangle
- Ikke kategoriseret Jane
- Ikke kategoriseret Jolin
- Ikke kategoriseret Eldom
- Ikke kategoriseret Nicai Systems
- Ikke kategoriseret My Wall
- Ikke kategoriseret Krups
- Ikke kategoriseret Kool-It
- Ikke kategoriseret Ground Zero
- Ikke kategoriseret Cavius
- Ikke kategoriseret Kelty
- Ikke kategoriseret Full Boar
- Ikke kategoriseret Zoom
Nyeste Ikke kategoriseret Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025