RYOBI ZRD47CK Manual

RYOBI Boremaskine ZRD47CK

Læs gratis den danske manual til RYOBI ZRD47CK (28 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 31 anmeldelser. Har du et spørgsmål om RYOBI ZRD47CK, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
3/8 in. DRILL AND
CLUTCHDRIVER™
PERCEUSE ET CLUTCHDRIVER™
10 mm (3/8 po)
TALADRO Y CLUTCHDRIVER™
DE 10 mm (3/8 pulg.)
D47C / D47CG
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para
reducir el riesgo de lesiones, el usuario
debe leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller bien à
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings 2-3 ..............................
Drill Safety Warnings 3
..........................
Symbols 4
..............................................
Electrical 5 .............................................
Assembly
............................................
6
Operation
.........................................
6-8
Maintenance
.......................................
9
Figures (Illustrations) 10-11 ....................
Parts Ordering and
Service Back page
................................
TABLE DES MATIÈRES
****************
Règles de sécurité relatives
aux outils électriques 2-3 ......................
Avertissements de sécurité
relatifs au perceuse 3 ............................
Symboles 4
............................................
Caractéristiques électriques 5 ...............
 Assemblage
........................................
6
Utilisation
........................................
6-8
Entretien
.............................................
9
Figures (illustrations) 10-11 ....................
Commande de pièces
et dépannage Page arrière ....................
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctricas 2-3
.........
Advertencias de seguridad taladro 3 ....
Símbolos 4 ............................................
Aspectos eléctricos
...........................
5
 Armado
..............................................
6
Funcionamiento
.............................
6-8
Mantenimiento
...................................
9
Figuras (illustraciones) 10-11 ...............

Pedidos de piezas
y servicio Pág. posterior
.......................
2 − English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.

Produkt Specifikationer

Mærke: RYOBI
Kategori: Boremaskine
Model: ZRD47CK

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI ZRD47CK stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine RYOBI Manualer

RYOBI

RYOBI One+ P215 Manual

23 Juni 2025
RYOBI

RYOBI One+ P222 Manual

20 Juni 2025
RYOBI

RYOBI One+ P223 Manual

20 Juni 2025
RYOBI

RYOBI SDS65 Manual

27 Januar 2025
RYOBI

RYOBI ACTIL04 Manual

15 Juli 2024
RYOBI

RYOBI One+ RPD181 Manual

13 December 2023
RYOBI

RYOBI HP412 Manual

29 September 2023
RYOBI

RYOBI RID1801 Manual

10 Juni 2023
RYOBI

RYOBI One+ RPD18C Manual

3 Juni 2023
RYOBI

RYOBI One+ R18PD2 Manual

10 Januar 2023

Boremaskine Manualer

Nyeste Boremaskine Manualer

Milwaukee

Milwaukee M18 2615-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2904-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2903-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 2607-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2811-20 Manual

13 August 2025
Bosch

Bosch GBH 18 V-26 Manual

13 August 2025
Milwaukee

Milwaukee M18 2801-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 Fuel 3404 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel Super Hawg 2809-20 Manual

13 August 2025
Milwaukee

Milwaukee M18 Fuel 2807-20 Manual

12 August 2025