SAB Heli Division Head HPS2 - H0428 Manual

SAB Heli Division Modelbygning Head HPS2 - H0428

Læs gratis den danske manual til SAB Heli Division Head HPS2 - H0428 (2 sider) i kategorien Modelbygning. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 22 anmeldelser. Har du et spørgsmål om SAB Heli Division Head HPS2 - H0428, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Center Hub

(H0411-S)

Linkage Rod

M3x50mm

(H0417-S)

Plastic Ball Link

(H0402-S)

Main Blade Grip

(H0182-S)

Bearing

10x

19x5mm

(HC422-S)

Blade Grip Arm

(H0183-S)

Plastic Ball Link

(H0402-S)

M4x24mm

(HC111-S)

M3x12mm

(HC062-S)

Nut M4

(HC212-S)

Approx

66mm

Spindle

(H0412-S)

Uniball Radius Arm Assembly ... x 2

Main Blade Grip Assembl

y ....x2

Note

: Larger ID Inside

Socket Head Cap Screw

Shouldered M4x25mm

(HC110-S)

Socket Head Cap

Screw M6x10mm

(HC124-S)

Oring

(HA024)

Metric Hex

Nylon Nut M4

(HC218-S)

Washer

14 x1mm

(HC194-S)

Washer

10x

16x1mm

(HC230-S)

Thrust Bearing

10x

18x5.5mm

(HC438-S)

Socket Head Cap

Screw M3x16mm

(HC068-S)

Washer

4x0.5mm

(HC176-S)

Swashplate Assemly

Center Hub Assembly

Radius Arm

(H0132-S)

Uniball Radius Arm

(H0205-S)

Flanged Bearing

7x3mm

(HC402-S)

Flanged Bearing

2.5x

6x2.5mm

(HC400-S)

Spacer Arm

2.5x

4x6.3mm

[H0253]

Spacer Arm

5x2.7mm

[H0134]

Main Blade Grip

Assembly

Bearing

10x

19x5mm

(HC422-S)

Approx 76mm

Radius Arm Assembly ... x 2

Uniball M3

5H18

(H0063-S)

Swashplate

Assemly

(H0422-S)

Linkage Rod A Assembly . . . .x2

Radius Arm

Assembly

(H0132-S)

Linkage Rod A

Assembly

(After a few flights, please check the preload

you can add HC232 if the preload has changed.)

Linkage Rod B

Assembly

(Initial length for the rods from the

swashplate to the Blade Grip.)

(to adjust the tracking,

turn this linkage.)

H0428M_Rev01

eg: Microlube GL261

Pin 5 mm

(H0413-S)

Socket Head Cap

Screw M2.5x6mm

(HC018-S)

Damper

(H0426-B)

Uniball M3

(H0065-S)

Socket Head Cap

Screw M4x10mm

(HC102-S)

Socket Head Cap

Screw M2.5x18mm

(HC032-S)

Uniball Radius Arm

Assembly

[HC230-S] [HC232-S]

Socket Head Cap

Screw M3x12mm

(HC062-S)

Socket Head Cap

Screw M3x10mm

(HC056-S)

Uniball M3

(H0437-S)

Please read this user manual carefully, it contains instructions for the correct assembly of the KIT.

Please refer to the website www.goblin-helicopter.com for updates and other important information. Thanks You.

Socket Head Cap

Shouder M5x35mm

(HC116-S)

Metrix Head

Nylon Nut M5

(HC218-S)

Blade

Washes

(H0158-S)

Page 1

[

H0428-K

]

Swashplate

[H0422-S]

- 1 x Swashplate Assembly.

- 2 x Bearings 30x

37x4mm.

- 6 x Uniballs M3x4

5 H3.

- 1 x Uniball M3x4

5 H18.

- 3 x Socket Head Cap

Screws M2x5mm.

- 4 x Socket Head Cap

Screws M2x8mm.

- 3 x Swasher

5x0.5mm

Radius Arm

[H0132-S]

- 1 x Center Hub.

- 2 x Socket Head Cap Screws

M3x12mm.

- 1 x Socket Head Cap Screws

Shouldered M4x25mm.

- 1 x Metric Hex Nylon Nut M4.

Center Hub

[H0411-S]

- 2 x Radius Arms.

- 2 x Spacer Arm

5x2.7mm.

- 2 x Spacer Arm

2.5x

4x6.3mm.

- 2 x Uniball Radius Arms.

- 2 x Socket Head Cap Screws M3x16mm.

- 2 x Socket Head Cap Screws M2.5x18mm.

- 2 x Washers

4x0.5mm.

- 2 x Flanged Bearings

2.5x

6x2.5mm.

- 2 x Flanged Bearings

7x3mm.

Linkage

[H0417-S]

- 2 x Linkages

M3x50mm.

- 4 x Plastic Ball Links.

Damper Derlin

[H0426-S]

- 3 x H0426-A.

- 3 x H0426-B.

- 3 x H0426-C.

- 3 x Washers

10x

16x1mm.

- 3 x Washers

10x

16x0.2mm.

- 3 x Orings 3050.

Recommendations

- These parts should be used only with models SAB Goblin

- Please follow all the instructions shown in the Goblin main manual. In this manual please read Chapther 2, Important notes

- Use Loctite on all threads.

- Put a small amount of grease inside the hub and the O-Ring.

- Check for axial play of the spindle at least after the first 10 flights and add shims if necessary.

- Firmly tighten the blades before flight.

ABOUT HPS2

The new HPS 2 head offers an independent dampening system

for each blade grip, there are three dampening settings:

A = Soft for smooth response.

B = Medium.

C = Firm for direct and precise response.

We recommend starting with the medium setting.

For safety reasons we suggest to not exceed 2300 rpm.

Spare Parts

- 2 x Blade Grip.

- 2 x

Thrust Bearing

10x

18x5.5mm.

- 4 x

Bearing

10x

19x5mm.

- 2 x Washer

10x

16x1mm.

- 2 x Buttom Head Cap Screw M4x8mm.

Blade Grip

[H0182-S]

- 2 x Blade Grip Arm.

- 2 x Socket Head Cap

Screw M4x10mm.

- 2 x Uniball M3x3.5 Ø5 H5.5.

Blade Grip Arm

[H0183-S]

Spindle Shaft

[H0412-S]

- 2 x Spindle Shaft.

- 2 x Pin 5mm.

- 4 x Socket Head Cap

Screw M2.5x6mm.

- 2 x Socket Head Cap

Screw M6x10mm.

- 2 x Washer Ø6,3xØ15x1.

Uniball M3x3.5 Ø5 H5.5

[H0437-S]

- 2 x Uniball M3x3.5x

5H5.5.

TIPS:

RECOMMENDATIONS

- These parts should be used only with models

SAB Goblin 630, 700, 770, Speed, URUKAY

- Please follow all the instructions shown in the

Goblin main manual. In this manual please read

Chapter 2, Important notes

- Use Loctite on all threads.

- Put a small amount of grease inside the hub and

the O-Ring.

- Check the spindle for axial play at least after the

first few flights and add shims as necessary,

slight axial preload is optimal.

The blade grips must move freely, but they

should not move just under their own weight.

- Firmly tighten the blades before flight.

Left Side

Right Side

* To remove the dampeners,

you can use a flathead screwdriver

through the hole as shown.

* Clock-wise, counter clock-wise thread

* By turning the linkages you can adjust tracking.

If tracking is adjusted correctly, you’ll see the metal

part line up around in the center of the opening.

Detail B

SPARE PARTS

Page 2

Produkt Specifikationer

Mærke:	SAB Heli Division
Kategori:	Modelbygning
Model:	Head HPS2 - H0428

Har du brug for hjælp?

Hvis du har brug for hjælp til SAB Heli Division Head HPS2 - H0428 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modelbygning SAB Heli Division Manualer

SAB Heli Division Goblin 770 Manual

24 August 2024

SAB Heli Division Head HPS2 - H0428 Manual

23 August 2024

SAB Heli Division GOBLIN 700 KYLE STACY EDITION Manual

22 August 2024

SAB Heli Division Head HPS3 - H0640-K Manual

22 August 2024

SAB Heli Division GOBLIN 630 COMPETITION Manual

22 August 2024

SAB Heli Division Head HPS3 - H0490-K Goblin 570 Manual

22 August 2024

SAB Heli Division Goblin 500 Sport Manual

21 August 2024

SAB Heli Division Goblin 570 KYLE STACY EDITION Manual

21 August 2024

SAB Heli Division Goblin 570 Manual

21 August 2024

Modelbygning Manualer

Nyeste Modelbygning Manualer

Piko 130130 Manual

30 Juli 2025

Piko 181266 Manual

30 Juli 2025

Piko 62034 Manual

30 Juli 2025

Lego Marvel Studios 76189 Manual

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025

30 Juli 2025