Sagem Axium HD-D56B Manual

Sagem TV Axium HD-D56B

Læs gratis den danske manual til Sagem Axium HD-D56B (16 sider) i kategorien TV. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Sagem Axium HD-D56B, eller vil du spørge andre brugere om produktet?

Side 1/16
ENGLISH
2
1. Precautions
1.1. Safety
Respect all maintenance advice, safety precautions and instructions recommended in this user manual
booklet are for your safety and to prolong the working life of the equipment.
• Definitions
Warning concerning user and equipment safety.
Warning about the risk of electric shocks.
Indicates a hot surface.
Warning about the onset of lamp depreciation
Safety regulations
This SAGEM AXIUM Home Cinema Screen is a class I appliance; it MUST be connected
to an electrical wall socket equipped with an earth .
Your SAGEM AXIUM™ Home Cinema Screen is designed to function:
with a 220-240 V~, 50 Hz, AC (alternating current) network;
at an ambient temperature between +5°C and +35°C;
in areas with humidity less than 85%.
(For more details, see chapter 15, 16, 17 according to the model).
Note: If your SAGEM AXIUM™ Home Cinema Screen has been in a damp or cold place, leave
it for four hours in the room where it will normally be used before switching on.
To avoid danger of overheating or electrocution:
avoid direct exposure to sunlight and do not put naked flames or any other heat source
under the appliance;
do not expose the appliance to water, drips or splashes
do not place objects filled with liquid, such as flower vases, on the appliance;
do not expose the appliance to very dusty environments;
avoid shocks and vibrations.
You are recommended to disconnect the appliance from the power supply and the aerial:
during thunder storms;
when not used for long periods of time;
when the appliance is malfunctioning (see chapter 13).
Before connecting or changing any connections to an audio-video/computer source (DVD
player, PC, etc.), disconnect the power cord from each appliance.
Make sure that ventilation grills are not obstructed by objects such as newspapers, table
cloths, curtains etc.
To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the
ventilation grills.
Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation.
Before disconnecting the power lead, you are recommended to let the cooling fans of your
SAGEM AXIUM™ Home Cinema Screen work for a few minutes. This will increase its working
life.
1
TABLE OF CONTENTS
1. Precautions 2
1.1. Safety 2
1.2. Maintenance 3
2. Set Up 4
2.1. Fitting and connecting the speakers (AXIUM HD-D45 only) 4
2.2. Aerial connection 4
2.3. Mains connection 4
2.4. Switching on your SAGEM AXIUMHome Cinema Screen 4
2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen 5
3. First Rapid Installation 5
4. Description of the buttons and indicator lights 6
4.1. Buttons located within the righthand side door 6
4.2. Front panel indicator lights and remote control receiver 6
5. Remote Control 7
6. Personalised settings 8
6.1. Changing the security code 8
6.2. Return to initial configuration 8
6.3. Searching TV programmes 8
6.4. Selecting the MENU language 10
6.5. Setting for the economy mode 10
6.6. Setting for the SPDIF output 11
6.7. Adjusting the headphone output 11
6.8. Setting the speaker mode 11
6.9. Adjusting the Hi-Fi output 12
6.10. Exit standby mode tuning 12
7. Connecting equipment and configurations 13
7.1. Connection advice 13
7.2. Source configuration 14
7.3. Configuration of computer sources 15
8. Day-to-day use 15
8.1. Picture adjustment 15
8.2. Sound adjustment 16
8.3. Sleep timer 17
8.4. Choice of sources 17
8.5. Choice of format 17
8.6. Programme information 18
8.7. Double picture mode selection 18
8.8. Choosing a TV programme 18
8.9. Picture hold 18
9. Teletext 19
10. NexTView EPG (AXIUM HD-D45 only) 20
10.1. Installation 20
10.2. Navigation 21
11. Compatibility with High Definition Television 21
12. HDCP 21
13. Diagnosing problems and Trouble Shooting 22
14. Changing the lamp unit 23
15. Technical characteristics of AXIUM HD-D45 model 24
15.1. Overview of AXIUM HD-D45 model 25
15.2. Fitting and connecting speaker columns, SAGEM AXIUM HD-D45 model 26
16. Technical characteristics of AXIUM HD-D45S model 27
16.1. Overview of AXIUM HD-D45S model 28
16.2. Fitting and connecting additionally purchased external speakers 28
17. Technical characteristics of AXIUM HD-D56B model 29
17.1. Overview of AXIUM HD-D56B model 30
17.2. Fitting and connecting additionally purchased external speakers 30
18. Index 31
Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 1
4
2. Set Up
2.1. Fitting and connecting the speakers (AXIUM HD-D45 only)
According to the model of your SAGEM AXIUM™ Home Cinema Screen, refer to the following paragraphs:
Model AXIUM HD-D45 see § 15.2
Model AXIUM HD-D45S see § 16.2
Model AXIUM HD-D56B see § 17.2
2.2. Aerial connection
Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM
AXIUM™ Home Cinema Screen.
Your SAGEM AXIUM™ Home Cinema Screen has two internal tuners (except model AXIUM HD-D45S, which only
has one tuner) and one cable is sufficient to feed them both.
2.3. Mains connection
Insert the mains plug into a 220-240V~ 50H zelectrical wall socket.
2.4. Switching on your SAGEM AXIUM™ Home Cinema Screen
R
AV3
AV2
AV1
SPDIF
AV4AV5
PC2 INANT
IN
OUT
L
R
L
R
L
DVI-D
INTERLACED
OR
PROGRESSIVE
Y
Pb
Pr
SERVICE
HI-FI
AUDIO
SUB
WF
L R
AUDIO
S
C
AXIUM HD-D45S only
PC IN (AXIUM HD-D45S)
3
1.2. Maintenance
Before doing anything, disconnect the mains lead from the wall socket.
Clean the cabinet using a soft, slightly damp cloth and a cloth with a non-abrasive, non wax detergent.
Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.
Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the
screen.
Your SAGEM AXIUM™ Home Cinema Screen utilises high voltage. Never attempt to access
the interior of the apparatus, except when you are changing the lamp unit.
Do not open or dismantle this product as this will expose you to the risk of electrocution.
This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as
the bulb indicator lights up on the front panel.
When the SAGEM AXIUM™ Home Cinema lamp reaches the end of its working life you may
hear a loud, sharp sound indicating it has expired. The appliance will only function when you
replace the bulb.
To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the
mains lead from the wall socket.
Wait at least one hour before attempting to change the lamp unit.
Make sure that you follow the whole replacement procedure described in 'Changing
the lamp unit' on page 23.
ENVIRONMENT
Preservation of the environment as part of a sustainable development logic is an essen-
tial concern of SAGEM SA. The desire of SAGEM SA is to operate systems observing the
environment and consequently it has decided to integrate environmental performances in
the life cycle of its products, from manufacturing to commissioning, use and elimination.
PACKAGING
The presence of the logo (green dot) means that a contribution is paid to an approved
national organisation to improve packaging recovery and recycling infrastructures.
To facilitate recycling, please respect the sorting rules set up locally for this kind of waste.
BATTERIES
If your product contains batteries, they must be disposed of at appropriate collection
points.
THE PRODUCT
The crossed-out waste bin stuck on the product means that the product belongs to the
family of electrical and electronic equipment.
In this respect, the European regulations ask you to dispose of it selectively:
At sales points in the event of the purchase of similar equipment.
At the collection points made available to you locally (drop-off centre, selective collec-
tion, etc.).
In this way you can participate in the re-use and upgrading of Electrical and Electronic
Equipment Waste, which can have an effect on the environment and human health.
LAMP UNIT
The worn-out lamp unit must be recycled. (Contact your waste recycling agency to obtain
the address of the nearest depot).
Switch the Home Cinema Screen on by pressing the ON/OFF switch on the lefthand side
of your appliance (See § 15.1, 16.1, 17.1 according to the model).
Setting up your remote control:
Open the battery compartment cover and insert the two R6-1.5V type batteries.
Make sure that the batteries are installed correctly.
Do not use batteries of different types or rechargeable batteries.
Switching on your SAGEM AXIUM™ Home Cinema Screen:
Press the standby button on the remote control or righthand side door.
NB: The on/off indicator light located on the front panel of your SAGEM AXIUM™ Home Cinema Screen
flashes orange whilst the lamp is warming up, then goes out when the lamp is functioning.
When you set up your SAGEM AXIUM™ Home Cinema Screen for the first time, you can take advantage of a
rapid installation procedure after this warm-up phase (see chapter 3).
Connecting other audio/video or computer appliances is covered in chapter 7. Before looking at this, proceed to
the rapid installation.
Anglais LU 45 A5.qxd 27/04/2005 11:07 Page 3


Produkt Specifikationer

Mærke: Sagem
Kategori: TV
Model: Axium HD-D56B

Har du brug for hjælp?

Hvis du har brug for hjælp til Sagem Axium HD-D56B stil et spørgsmål nedenfor, og andre brugere vil svare dig