Sagem AXIUM HDD 45 Manual

Sagem LCD TV AXIUM HDD 45

Læs gratis den danske manual til Sagem AXIUM HDD 45 (14 sider) i kategorien LCD TV. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Sagem AXIUM HDD 45, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
ENGLISH
2
1. Precautions
1.1. Safety
Respect all maintenance advice, safety precautions and instructions recommended in this user booklet
are for your safety and to prolong the working life of the equipment.
• Definitions
Warning concerning user and equipment safety.
Warning about the risk of electric shocks.
Indicates a hot surface.
Warning about the danger of the lamp depreciation
• Safety regulations
This SAGEM AXIUM™ Home Cinema Screen is a class I appliance; it MUST be connected
to an electrical wall socket equipped with an earth.
Your SAGEM AXIUM™ Home Cinema Screen is designed to function:
– with a 220-240 V~, 50-60 Hz, AC (alternating current) network;
– at an ambient temperature between +5°C and +35°C;
– in areas with humidity less than 85%.
(For more details, see chapter 16).
To avoid danger of overheating or electrocution:
– avoid direct exposure to sunlight and do not put naked flames or any other heat source
under the appliance;
– do not expose the appliance to water drips or splashes;
– do not place objects filled with liquid, such as flower vases, on the appliance;
– do not expose the appliance to very dusty environments;
– avoid shocks and vibrations.
You are recommended to disconnect the appliance from the power supply and the aerial:
– during thunder storms;
– when not used for long periods of time;
– when the appliance is malfunctioning (see chapter 13).
Before connecting or changing any connections to an audio-video/computer source (DVD
player, PC, etc.), disconnect the power cord from each appliance.
Make sure that ventilation grills are not obstructed by objects such as newspapers, table
cloths, curtains etc.
To avoid electric shocks, do not insert foreign bodies, such as needles or coins into the
ventilation grills.
Leave a gap of at least 10 cm around the appliance to allow sufficient ventilation.
Before disconnecting the power lead, you are recommended to let the cooling fans of your
SAGEM AXIUM™ Home Cinema Screen work for a few minutes. This will increase its working
life.
1
TABLE OF CONTENTS
1. Precautions 2
1.1. Safety 2
1.2. Maintenance 3
2. Set Up 4
2.1. Fitting the speaker columns (optional) 4
2.2. Aerial connection 4
2.3. Mains connection 5
2.4. Switch on 5
2.5. Switching off your SAGEM AXIUM™ Home Cinema Screen 5
3. First Rapid Installation 6
4. Description of the buttons and indicator lights 6
4.1. Buttons the right side door 6
4.2. Front panel indicator lights and remote control receiver 7
5. Remote Control 7
6. Personalised settings 8
6.1. Changing the security code 8
6.2. Return to initial configuration 8
6.3. Searching TV programmes 8
6.3.1. Choice of country 8
6.3.2. Manual installation 9
6.3.3. Automatic installation 9
6.3.4. Modifying the programme list 9
6.4. Choose the MENU language 10
6.5. Setting for the economy mode 10
6.6. Setting for the SPDIF output 10
6.7. Adjusting the headphones output 11
6.8. Setting the speaker mode 11
6.9. Adjusting the Hi-Fi output 11
6.10. Exit stanby mode tuning 11
7. Connecting equipment and configurations 12
7.1. Connection advice 12
7.2. Source configuration 13
7.3. Configuration of computer sources 14
8. Day-to-day use 14
8.1. Picture adjustment 14
8.2. Sound adjustment 15
8.3. Sleep timer 16
8.4. Choice of sources 16
8.5. Choice of format 16
8.6. Programme information 17
8.7. Double picture mode selection 17
8.8. Choosing a TV programme 17
8.9. Picture hold 17
9. Teletext 18
10. NexTView EPG 19
10.1. Installation 19
10.2. Navigation 19
11. Compatibility with High Definition Television 20
12. HDCP 20
13. Diagnosing Trouble Shooting 21
14. Changing the lamp unit 22
15. Index 23
16. Technical characteristics 24
16.1. Overall view 25
Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 1
4
2. Set Up
2.1. Fitting the speaker columns (optional)
Take the speaker columns out of their packaging. Put the first speaker column beside the screen making the fixing
holes coincide with those of the frame. Using the screw supplied and a screwdriver, fix the two lugs of the column
against the frame. Do the same for the second speaker column.
Connect each column to your SAGEM AXIUM™ Home Cinema Screen with the audio cables supplied. To hide
the cables, start from the black and red terminals on the back of the column pushing the wires into the groove.
Then continue like this up to the terminals of the television set. Do the same for the second speaker column.
You have the possibility of connecting your own speakers to your SAGEM AXIUM™ Home Cinema Screen if these
have impedance greater than or equal to 8 ohms. To do this, disconnect the speaker columns, connect your
speakers instead, pass the wires in the grooves provided and deactivate the subwoofer (see §8.2).
2.2. Aerial connection
Insert the end of the coaxial cable leading from your aerial into the aerial input socket at the back of your SAGEM
AXIUM™ Home Cinema Screen.
Your SAGEM AXIUM™ Home Cinema Screen is fitted with 2 tuners, but only one cable is needed to supply both.
R
AV3
AV2
AV1
SPDIF
AV4AV5
PC2 IN
ANT
HI-FI
IN
OUT
L
L
R
R
L
R
L
DVI-D
INTERLACED
OR
PROGRESSIVE
Y
Y
Pb
Pr
SERVICE
3
1.2. Maintenance
•Before doing anything, disconnect the mains lead from the wall socket.
• Clean the cabinet using a soft, slightly damp cloth and a non-abrasive and non-wax detergent.
• Clean the screen carefully using a soft, damp cloth lightly impregnated with a soap solution.
• Never use benzene, alcohol or petroleum-based cleaning products as these could damage the finish and the
screen.
Your SAGEM AXIUM™ Home Cinema Screen utilises high voltage. Never attempt to access
the interior of the apparatus, except when you are changing the lamp unit.
Do not open or dismantle this product as this will expose you to the risk of electrocution.
This appliance will auto-detect the end of the lamp's working life. Replace the lamp as soon as
the bulb indicator lights up on the front panel.
When the SAGEM AXIUM™ Home Cinema Screen lamp reaches the end of its working life,
there could be a loud, sharp sound when it stops working. The appliance will only work when
you replace the bulb.
To avoid burns or the lamp unit damage whilst it is being replaced, you must disconnect the
mains lead from the wall socket.
Wait at least one hour before starting to change the lamp unit.
Make sure that you follow the whole replacement procedure described in "Changing
the lamp unit" on page 22.
Only use suitable batteries that comply with the maker's specifications (see chapter 16).
– the batteries supplied are not rechargeable;
– pay particular attention to environmental matters;
– take the defective or used batteries to the places provided for this effect in accordance with
current regulations; never throw them in the dustbin.
Anglais LU 45 A5.qxd 06/10/2004 10:25 Page 3

Produkt Specifikationer

Mærke: Sagem
Kategori: LCD TV
Model: AXIUM HDD 45

Har du brug for hjælp?

Hvis du har brug for hjælp til Sagem AXIUM HDD 45 stil et spørgsmål nedenfor, og andre brugere vil svare dig


LCD TV Sagem Manualer

Sagem

Sagem AXIUM HDD 45 Manual

5 August 2024

LCD TV Manualer

Nyeste LCD TV Manualer

Philips

Philips 24PFL4555 Manual

13 Marts 2025
Philips

Philips 22PFL4407 Manual

12 Marts 2025
Philips

Philips 22PFL4556 Manual

12 Marts 2025
JVC

JVC LT-19DB9 Manual

15 Januar 2025
JVC

JVC LT-26ED91U Manual

15 Januar 2025
Walker

Walker WPS28265 Manual

14 Januar 2025
JVC

JVC LT-42X579 Manual

14 Januar 2025
Hitachi

Hitachi L40A105A Manual

14 Januar 2025
Finlux

Finlux 42FLSKR170LHCD Manual

14 Januar 2025
Hitachi

Hitachi L42N03A Manual

13 Januar 2025