2SALICRU
General index.
1. INTRODUCTION.
1.1. THANK YOU LETTER.
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
2.1.1. Conventions and symbols used.
3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
3.2. STANDARDS.
3.3. ENVIRONMENT.
4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the device.
4.2. DEFINITION OF THE PRODUCT.
4.2.1. Nomenclature.
4.3. OPERATING PRINCIPLE.
4.3.1. Notable features.
4.4. OPTIONAL EXTRAS.
4.4.1. Isolation transformer:
4.4.2. Communication card.
4.4.2.1. Integration into computer networks using an SNMP
adapter.
4.4.2.2. Modbus RS485.
4.4.2.3. Interface to relays.
4.4.3. Extendable guide kits for mounting in a rack cabinet.
5. INSTALLATION.
5.1. RECEPTION OF THE DEVICE.
5.1.1. Reception, unpacking and contents.
5.1.2. Storage.
5.1.3. Unpacking.
5.1.4. Transport to the site.
5.1.5. Siting, immobilising and considerations.
5.1.5.1. Rack-type mounting in a 19” cabinet.
5.1.5.2. Rack-type mounting in a 19” cabinet with backup
extension (battery module).
5.1.5.3. Vertical tower-type mounting.
5.1.5.4. Rotation of the control panel with LCD display.
5.1.5.5. Vertical tower-type mounting with backup extension
(battery module).
5.1.5.6. Preliminary considerations before connection.
5.1.5.7. Preliminary considerations before connection, regarding
the batteries and their protections.
5.2. CONNECTIONS.
5.2.1. Connection of the input.
5.2.2. Connection of the IEC output connectors.
5.2.3. Connection to the optional battery module (backup
extension).
5.2.4. Terminals for EPO (emergency power off).
5.2.5. Communication port.
5.2.5.1. RS232 and USB port.
5.2.6. Smart slot for the integration of an electronic communication
unit.
5.2.7. Protection against voltage spikes for the modem / ADSL /
fax, etc., line.
5.2.8. Software.
5.2.9. Considerations before start-up with connected loads.
6. OPERATION.
6.1. START-UP.
6.1.1. Checks before start-up.
6.2. UPS START-UP AND SHUTDOWN.
6.2.1. UPS start-up with mains voltage.
6.2.2. UPS start-up without mains voltage.
6.2.3. UPS shutdown with mains voltage.
6.2.4. UPS shutdown without mains voltage.
7. CONTROL PANEL WITH LCD DISPLAY.
7.1. GENERAL INFORMATION FOR THE SERIES.
7.1.1. Information represented by the display.
7.1.2. Other messages shown on the LCD display.
7.1.3. Common abbreviations shown on the display.
7.2. COMPOSITION OF THE CONTROL PANEL WITH LCD
DISPLAY.
7.3. AUDIBLE ALARMS.
7.3.1. Location of the adjustment parameters on the display.
7.3.2. Settings.
7.3.2.1. Ah configuration of parameter ‘05’.
7.3.2.2. Operating mode / Description of state.
7.3.2.3. Warning or alert codes and indicators.
7.3.2.4. Error or fault codes.
8. MAINTENANCE, WARRANTY AND SERVICE.
8.1. BATTERY MAINTENANCE.
8.1.1. Notes for the installation and replacement of the battery.
