Please retain instructions for future reference.
When using electrical appliances, basic safety precautions
should always be followed.
Check that the voltage indicated on the rating plate
corresponds with that of the local network before
connecting the appliance to the mains power supply.
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory
or mental capabilities and knowledge, if they have been
supervised/instructed and understand the hazards involved.
Children shall not play with the appliance.
Children should not perform cleaning or user maintenance,
unless they are older than 8 and supervised.
This appliance is not a toy.
If the power supply cord, plug or any part of the appliance is
malfunctioning or if it has been dropped or damaged, cease
using the product immediately to avoid potential injury.
This appliance contains no user serviceable parts, only
a qualified electrician should carry out repairs. Improper
repairs may place the user at risk of harm.
Keep the appliance and its power supply cord out of the
Keep the appliance out of the reach of children when it is
switched on or cooling down.
Keep the appliance and its power supply cord away
from heat or sharp edges that could cause damage.
Keep the power supply cord away from any parts of the
appliance that may become hot during use.
Keep the appliance away from other heat emitting
Do not allow the power supply cord to hang over
worktops, touch hot surfaces or become twisted.
Do not immerse the electrical components of this
appliance in water or any other liquid.
Do not operate the appliance with wet hands or if any
Do not leave the appliance unattended whilst connected
to the mains power supply.
Do not remove the appliance from the mains power
supply by pulling the cord; switch it o and remove the
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its
Do not use any accessories other than those supplied.
Do not use this appliance outdoors.
Do not store the appliance in direct sunlight or in high
Do not move the appliance whilst it is in use.
If this appliance falls or accidentally becomes immersed
in water, unplug it from the wall outlet immediately. Do
not reach into the water.
Always unplug the appliance after use and allow it to cool
fully before any cleaning, user maintenance or storing away.
Always use the appliance on a stable, heat-resistant
surface, at a height that is comfortable for the user.
This appliance should not be operated by means of an
external timer or separate remote control system.
Use of an extension cord with the appliance is not
This appliance is intended for domestic use only. It
should not be used for commercial purposes.
CAUTION: Hot surface – do not touch hot sections
or heating components of the appliance.
WARNING: Boiling water and steam can cause
serious injury; exercise extreme caution when using
Exercise caution when using the kettle, as steam will be emitted
from the spout and/or lid, especially whilst refilling.
Always allow the kettle to cool thoroughly before touching or
Take care when returning the kettle to the base; the heating
element will remain hot after use.
Switch o the appliance and disconnect it from the mains power
supply before changing or fitting attachments.
Open the lid while the kettle is boiling.
Fill the kettle above its max. fill mark. Overfilling the kettle may
cause boiling water to be ejected.
Use the kettle if it has been dropped, if there are visible signs of
damage or if it is leaking.
Use the kettle if the water level is less than the minimum fill mark.
Misuse of the kettle could cause injury to the user.
Use any power supply base unit other than the one provided
Put any liquid other than water into the kettle.
The kettle is equipped with a boil-dry sensor. If the kettle is
accidentally turned on whilst empty, the boil-dry sensor will
activate causing the power to switch off. The kettle will then
remain inactive and the power switch will not function for
several minutes until the kettle is cool. Do not try to use the
kettle during this time; once it has cooled down, it will resume its
Wipe the kettle and power base with a soft, damp cloth then
allow it to dry thoroughly.
Never use harsh or abrasive cleaning detergents or scourers to
clean the kettle, as this could cause damage.
Limescale can develop over time and may aect the performance
and lifespan of the kettle.
It is recommended to descale the kettle regularly, at least once
every three months, especially if the kettle is used in a hard
water area. Frequent descaling will improve the performance
and lifespan of the kettle.
STEP 1: Fill the kettle to the max. fill mark with cold water.
STEP 2: Add a commercial descaling agent to the kettle, adhering
to the manufacturer’s instructions. It is not recommended to use
vinegar to descale the kettle.
STEP 3: Allow the kettle to boil, switch it o and leave to soak
for at least 20 minutes or for the length of time specified on the
STEP 4: Empty the kettle and refill to the max. fill mark with clean
water. Boil the kettle once more and pour the water away after it
has cooled. The kettle should now be descaled.
NOTE: If the kettle switches o before it has boiled or
a white deposit is noticed on the inside of the kettle,
it needs to be descaled. Add a commercial descaling
agent to the kettle, adhering to the manufacturer’s
instructions. It is not recommended to use vinegar to
Before using the kettle for the first time, wipe it clean with a soft,
damp cloth and dry thoroughly.
Check that the limescale filter is attached.
