Samsung MX-ST50B Manual

Samsung Højttaler MX-ST50B

Læs gratis den danske manual til Samsung MX-ST50B (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Samsung MX-ST50B, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
CP-A222WN LCD Projector
Fully featured ultra short throw
LCD projector with network capabilities
and a low operating cost all in a
portable design.
Key Features
■
XGA 1024 x 768 resolution
■
2,200 ANSI lumens white/color output
■
4000:1 contrast ratio
■
HDMI 1 input
■
4,000 hours hybrid lter*
■
3,000 hours lamp life (Standard mode)
and 5,000 hours lamp life (Eco mode)**
■
ImageCare technology
■
Wireless compatible
CP-A222WN
Hitachi’s CP-A222WN ultra short throw LCD projector combines an array
of advanced features in a compact, portable design perfectly suited for class-
rooms of any size. Small in size, but big on performance, the CP-A222WN
provides vibrant image quality, cost-effective operation, and long-lasting
reliability. The CP-A222WN incorporates a cloning function which enables you
to copy setting data from one projector to others of the same model via USB
memory. Plus, Hitachi’s Intelligent Eco Mode with ImageCare combines optimal
picture performance with energy savings for a lower total cost of ownership.
For added peace of mind, Hitachi’s CP-A222WN is also backed by a generous
warranty and our world-class service and support programs.
1800 HITACHI
dps@hitachi.com.au
www.hitachi.com.au/dps
CP-A222WN LCD Projector
* Actual filter life will vary by individual filter and based on environmental conditions, selected operating mode, user settings
and usage. Hours of average filter life specified are not guaranteed and do not constitute part of the product warranty.
** Actual lamp life will vary by individual lamp and based on environmental conditions, selected operating mode, user
settings and usage. Hours of average lamp life specified are not guaranteed and do not constitute part of the product or
lamp warranty. Lamp brightness decreases over time.
UNIQUE FEATURES
STANDARD FEATURES
Display via USB
Simply plug and play using the USB port instead of the
15-pin D-sub VGA cable.
HI0073-06/12 WEB
All specifications subject to change without notice.
3LCD and the 3LCD logo are registered trademarks of the Seiko Epson Corporation.
©2012 Hitachi America, Ltd. All Rights Reserved
.
Tabletop Presentation
Make any tabletop a projection screen using the optional
tabletop stand. Ideal for a small group environment or in a
room with limited space.
Microphone Input
A microphone can be used via the jack located on the
input panel. Allows for more dynamic presentations even in
standby mode.
Input Source Naming
Users can name input sources in simple language instead of
factory default name. Exclusive to Hitachi.
PIN Lock / MyScreen / MyText
PIN lock protection can limit projector users. MyScreen PIN
lock keeps captured images on the startup screen. Users can
set any name logo to MyScreen, clearly identifying ownership.
MyText provides the ability to write text on the startup screen
such as model name, serial number or location.
PJMessenger
PJMessenger function allows you to send and display text
messages and audio alerts on your networked projectors. It
is an easy and efficient way to send announcements out to
multiple units.
PC-Less Presentation
By using a USB memory stick or other storage device, you
can use the projector without a computer. Menus are easy
to see with a thumbnail display. Additionally there is also a
slideshow function.
Present Content via LAN
Hitachi’s suite of networking software allows you to easily
send content directly from your PC to the projector via your
LAN connection.
Template Function
Line templates in the projector menu can help when writing
on a whiteboard. There are four types of line templates to
choose from.
Wireless Presentation Ready
You can use a wireless network by connecting the projector
to a computer using the optional USB wireless adapter part
number USBWL11N. The adapter supports IEEE802.11b/g
and the latest 11n.
Cloning Function
Copy setting data from one projector to others of the same
model via USB memory. Cloning can save almost all PJ
settings such as gamma and keystone via USB memory.
settings
settings
Intelligent Eco and Saver Modes
Automatically changes the brightness of the lamp according to
the brightness level of the screen. Also, automatically changes
the brightness of the lamp if there is no change in the screen
image. Using ImageCare technology, these features give
optimal picture performance with maximum energy savings.
ImageCare Technology
ImageCare is a lamp power control function that combines
optimal picture performance with maximum energy savings
by decreasing energy usage, improving contrast ratio and
lengthening lamp life. The result is a lower total cost of
ownership and decreased maintenance cost.
Serial Number and Media Access Control Label
A label is affixed to the front of the projector to more easily
access and read the model name and serial number while
mounted in ceiling use. This is a convenience for installers,
end user and auditors for instant accessibility.
Hitachi Australia Pty Ltd
Level 8, 123 Epping Road, North Ryde, NSW 2113
Phone: 1800 HITACHI
Web: www.hitachi.com.au/dps
CP A222WN LCD Projector
STANDARD FEATURES
Display via USB
Simply plug and play using the USB port instead of the
15-pin D-sub VGA cable.
Tabletop Presentation
Make any tabletop a projection screen using the optional
tabletop stand. Ideal for a small group environment or in a
room with limited space.
Microphone Input
A microphone can be used via the jack located on the
input panel. Allows for more dynamic presentations even in
standby mode.
Input Source Naming
Users can name input sources in simple language instead of
factory default name. Exclusive to Hitachi.
Cloning Function
Copy setting data from one projector to others of the same
model via USB memory. Cloning can save almost all PJ
settings such as gamma and keystone via USB memory.
settings
settings
Intelligent Eco and Saver Modes
Automatically changes the brightness of the lamp according to
the brightness level of the screen. Also, automatically changes
the brightness of the lamp if there is no change in the screen
image. Using ImageCare technology, these features give
optimal picture performance with maximum energy savings.
ImageCare Technology
ImageCare is a lamp power control function that combines
optimal picture performance with maximum energy savings
by decreasing energy usage, improving contrast ratio and
lengthening lamp life. The result is a lower total cost of
ownership and decreased maintenance cost.
CP-A222WN LCD Projector
Network Control, Maintenance and
Security
Embedded networking gives you the ability
to manage and control multiple projectors
over your LAN. Features include scheduling
of events, centralized reporting, image
transfer and e-mail alerts for reactive and
routine maintenance.
PIN Lock / MyScreen / MyText
PIN lock protection can limit projector users. MyScreen PIN
lock keeps captured images on the startup screen. Users can
set any name logo to MyScreen, clearly identifying ownership.
MyText provides the ability to write text on the startup screen
such as model name, serial number or location.
PJMessenger
PJMessenger function allows you to send and display text
messages and audio alerts on your networked projectors. It
is an easy and efficient way to send announcements out to
multiple units.
PC-Less Presentation
By using a USB memory stick or other storage device, you
can use the projector without a computer. Menus are easy
to see with a thumbnail display. Additionally there is also a
slideshow function.
Present Content via LAN
Hitachi’s suite of networking software allows you to easily
send content directly from your PC to the projector via your
LAN connection.
Template Function
Line templates in the projector menu can help when writing
on a whiteboard. There are four types of line templates to
choose from.
Wireless Presentation Ready
You can use a wireless network by connecting the projector
to a computer using the optional USB wireless adapter part
number USBWL11N. The adapter supports IEEE802.11b/g
and the latest 11n.
Serial Number and Media Access Control Label
A label is affixed to the front of the projector to more easily
access and read the model name and serial number while
mounted in ceiling use. This is a convenience for installers,
end user and auditors for instant accessibility.

Produkt Specifikationer

Mærke: Samsung
Kategori: Højttaler
Model: MX-ST50B

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung MX-ST50B stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler Samsung Manualer

Samsung

Samsung MX-ST50F Manual

14 Oktober 2025
Samsung

Samsung SWA-9250S Manual

8 Juni 2025
Samsung

Samsung Wireless 360 Speaker R7 Manual

21 August 2024
Samsung

Samsung Radiant 360 R5 Manual

16 August 2024
Samsung

Samsung M7 Manual

9 August 2024
Samsung

Samsung MX-ST50B Manual

7 August 2024
Samsung

Samsung TW-H5500 Manual

22 Juli 2024
Samsung

Samsung Sound+ MS550 Manual

22 Juli 2024
Samsung

Samsung MX-ST40B Manual

8 Juli 2024
Samsung

Samsung HW-R450 Manual

5 Juli 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Ikea

Ikea NATTBAD 806.049.25 Manual

15 Oktober 2025
Axiom

Axiom FL80P Manual

15 Oktober 2025
Audiofrog

Audiofrog GB10OE-0005 Manual

15 Oktober 2025
Italian Stage

Italian Stage SPX15AUB Manual

15 Oktober 2025
Ikea

Ikea NATTBAD 906.016.10 Manual

14 Oktober 2025
Infinity

Infinity Reference 1000SSL Manual

14 Oktober 2025
Proel

Proel LTX6PW Manual

14 Oktober 2025
Morel

Morel Sensus 63 Manual

14 Oktober 2025
Proel

Proel AHS30T Manual

14 Oktober 2025
Axiom

Axiom AX2065P Manual

14 Oktober 2025