Sandisk SSD Plus Manual

Sandisk Solid State-drev (ssd) SSD Plus

Læs gratis den danske manual til Sandisk SSD Plus (7 sider) i kategorien Solid State-drev (ssd). Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Sandisk SSD Plus, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

SanDisk® Solid State Drive

Quick-Start Installation Guide

Upgrading your existing hard disk drive (HDD) to a new SanDisk Solid State Drive (SSD) is easy!

This guide provides quick instructions on how to upgrade your SATA-based desktop or notebook computer

HDD to a SanDisk SSD. We also cover cloning your data from your current HDD to your new SanDisk SSD

using cloning software.

Replacing your HDD with a solid state drive consists of three easy steps:

1. Connect your SanDisk SSD to your computer

2. Clone the data from your existing HDD to your new SanDisk SSD

3. Uninstall your HDD and replace it with your new SanDisk SSD

 • Obtaindatacloningsoftware.

There are many options available for purchase, but in this guide we will use data cloning software

provided by Apricorn® to walk you through the data cloning process.

 • Conrmyouhavetherequiredhardware*foryourinstallationscenario:

1. SATA data cable

(required for desktops computers only)

2. USB-to-SATA data cable

3. 3.5-inch mounting adapter and screws

(required for desktop computers only)

4. Phillips screwdriver

*EachoftheabovehardwarecomponentsaresoldseparatelyorcanbefoundintheSanDiskSSDConversionKit.Seewww.sandisk.com/go-SSD

BEFOREYOUSTART

This guide applies to most solid state drives;

check the instructions included with your SSD

for more details.

NOTE:

Now that you have the required hardware and data cloning software, a few safety notes:

 • HandleyourSSDwithcare.

 • KeepyourSSDintheprotectiveanti-staticsleeveuntilyouarereadytoinstallit.

 • DonottouchthegoldconnectorsonyourSSD.

 • Tominimizestaticelectricity,touchyourcomputercasebeforehandlingtheSSD.

 • DonotdisassembletheSSDinanyway;thiswillvoidtheSanDiskManufacturer’swarranty.**

Nowyou’rereadytobegin!

SAFETYINSTRUCTIONS

**Toreviewthewarrantyforthisproduct,seewww.sandisk.com/wug.

Intherststep,youwillconnectyourSanDiskSSDtoyourcomputerinordertocloneyourdata.

Simply follow these directions:

1. Carefully connect SATA end of the SATA-to-USB cable to your SanDisk SSD.

2. Connect the USB end of the SATA-to-USB cable to an available USB port on your computer.

 3. WaitfortheoperatingsystemtorecognizetheSanDiskSSD.

Connecting Your SSD to Your Computer

That’s it, now you’re all set to clone your data!

SATA devices such as SSDs may draw more power than some computers are capable of

delivering.IftheSanDiskSSDisnotrecognized,removeallotherUSBdevicesfromyour

computerkeepingonlytheSanDiskSSDconnected.Keepthesedevicesdisconnecteduntil

the data migration is complete.

NOTE:

STEP1

Produkt Specifikationer

Mærke:	Sandisk
Kategori:	Solid State-drev (ssd)
Model:	SSD Plus

Har du brug for hjælp?

Hvis du har brug for hjælp til Sandisk SSD Plus stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solid State-drev (ssd) Sandisk Manualer

Sandisk PC SN730 Manual

4 August 2024

Sandisk Extreme Pro SSD Manual

30 Juli 2024

Sandisk SSD Plus Manual

29 Juli 2024

Sandisk Ultra 3D Manual

10 Juli 2024

Solid State-drev (ssd) Manualer

Nyeste Solid State-drev (ssd) Manualer

Nedis HDDE25410BK Manual

14 Januar 2025

12 Januar 2025

29 December 2024

29 December 2024

29 December 2024

28 December 2024

Sabrent SB-1342-1TB Manual

21 December 2024

ADATA HV320 Manual

16 December 2024

ADATA HD770G Manual

16 December 2024

ADATA SE770G Manual

16 December 2024